• Steel and Composite Structures
• /
• 제5권1호
• /
• pp.49-70
• /
• 2005

This paper reports on finite element analysis techniques that may be applied to the study of circular hollow structural sections and related bearing connection geometries. Specifically, a connection detail involving curved steel saddle bearings and a Structural Tee (ST) connected directly to a large-diameter Hollow Structural Section (HSS) truss chord, near its open end, is considered. The modeling is carried out using experimentally verified techniques. It is determined that the primary mechanism of failure involves a flexural collapse of the HSS chord through plastification of the chord wall into a well-defined yield line mechanism; a limit state for which a shell-based finite element model is well-suited to capture. It is also found that classical metal plasticity material models may be somewhat limited in their applicability to steels in fabricated tubular members.

• Wind and Structures
• /
• 제19권5호
• /
• pp.541-563
• /
• 2014

This paper investigates the topographic effects on wind characteristics over hilly terrain, based on wind data recorded at a number of meteorological stations in or near complex terrain. The multiply data sources allow a more detailed investigation of the flow field than is normally possible. Vertical profiles of mean and turbulent wind components from a Sodar profiler were presented and then modeled as functions of height and wind speed. The correlations between longitudinal and vertical wind components were discussed. The phenomena of flow separation and generation of vortices were observed. The distance-dependence of the topographic effects on gust factors was revealed subsequently. Furthermore, the canyon effect was identified and discussed based on the observations of wind at a saddle point between two mountain peaks. This study aims to further understanding of the characteristics of surface wind over rugged terrain. The presented results are expected to be useful for structural design, prevention of pollutant dispersion, and validation of CFD (computational fluid dynamics) models or techniques over complex terrains.

• Wind and Structures
• /
• 제19권1호
• /
• pp.35-58
• /
• 2014

A numerical simultaneous solution involving a linear elastic model was applied to study the fluid-structure interaction (FSI) of membrane structures under wind actions, i.e., formulating the fluid-structure system with a single equation system and solving it simultaneously. The linear elastic model was applied to managing the data transfer at the fluid and structure interface. The monolithic equation of the FSI system was formulated by means of variational forms of equations for the fluid, structure and linear elastic model, and was solved by the Newton-Raphson method. Computation procedures of the proposed simultaneous solution are presented. It was applied to computation of flow around an elastic cylinder and a typical FSI problem to verify the validity and accuracy of the method. Then fluid-structure interaction analyses of a saddle membrane structure under wind actions for three typical cases were performed with the method. Wind pressure, wind-induced responses, displacement power spectra, aerodynamic damping and added mass of the membrane structure were computed and analyzed.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.57-64
• /
• 2002

Three kinds of viscoelastic damper model, which has a non-linear spring as an element is studied analytically and numerically The behavior of the damper model shows non-linear hysteresis curves which is qualitatively similar to those of real viscoelastic materials. The motion is governed by a non-linear constitutive equation and an additional equation of motion. Harmonic balance method is applied to get analytical solutions of the system. The frequency-response curves sallow that multiple solutions co-exist and that the jump phenomena can occur. In addition, it is shown that separate solution branch exists and that it can merge with the primary response curve. Saddle-node bifurcation sets explain the occurrences of such non-linear Phenomena.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.449-454
• /
• 2000

A three-parameter model of viscoelastic damper, which has a non-linear spring as an element is incorporated into an oscillator. The behavior of the damper model shows non-linear hysteresis curves which is qualitatively similar to those of real viscoelastic materials. The motion is governed by three-dimensional non-linear dynamical system of equations. The harmonic balance method is applied to get analytic solutions of the system. The frequency-response curves show that multiple solutions co-exist and that the jump phenomena can occur. In addition, it is shown that separate solution branch exists and that it can merge with the primary response curve. Saddle-node bifurcation sets explain the occurences of such non-linear phenomena. A direct time integration of the original equation of motion validifies the use of the harmonic balance method to this sort of problem.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.12-17
• /
• 2006

This study uses a characteristic function to explain correlations between the objective function and design variables. For the use, structural analysis and buckling analysis are carried out. the dimensional change of an original overhead crane is made based on the table of orthogonal array. For two functions or more, the effectiveness of design change can be evaluated in accordance with change in design parameters. Also, the overhead crane's weight is reduced by up to 10.55 percent while its structural stability maintained.

• 환경위생공학
• /
• 제15권4호
• /
• pp.4-13
• /
• 2000

산업공정에서 배출되는 대기오염물질 및 유독성가스를 제거하기 위한 방법에는 여러 가지가 적용되고 있으나, 본 연구에서는 충전탑을 이용한 흡수원리로써 오염물질을 처리하는데 후력학적 특성에 대해서 연구하였다. 즉 환경보호와 화학공업에서 에너지 절약 측면에 충전탑의 사용이 증가되고 있으며, 충전물의 재료로는 플라스틱, 금속 및 세라믹 등으로 제작되며 종류로는 VSP-ring, Hiflow-ring, Hackette, Top-packing, Envi-pac 등이 있고 사용범위는 정류와 증류, 흡수 및 탈착과 액체와 액체의 추출공정 등에 효율적으로 사용되고 있다. 산업현장에서는 과거에 주로 사용되어온 Intalox-saddle, Rasching-ring, Pall-ring 등의 재래적 충전물은 압력손실과 물질전달, 에너지 절약 및 효율성이 좋은 격자형 충전물의 개발로 인하여 점점 사용이 감소되고 있는 추세이며, 최근에는 합성수지로 제조된 충전물 NSW-ring, Hiflow-ring, Envi-pac 등은 실험 결과에 의해서 재래적인 충전물 Raschig-ring과 Pall-ring보다 높은 상대적인 공간체적과 충전높이에 따른 낮은 압력손실과 함께 높은 부하 한계치에 대하여 효율적이고 가벼운 분리작용에 의한 수력학적 특성이 증명되어졌다. 격자형 충전물이 산업에 적용되기 위해서는 압력손실과 액체함량, 부하 한계치 가스상 또는 액상 물질전달의 특성을 규명하는 것이 중요하다. 따라서 본 연구에서는 가수와 액체의 역류흐름에 의한 수력학적 특성과 물질전달 실험결과를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.231-234
• /
• 1997

This paper presents improved direct method for calculating the closest saddle node bifurcation (CSNB) point, which is also applicable to the selection of appropriate load shedding, reactive power compensation point detection. The proposed method reduced dimension of nonlinear equation compared with that of Dobson's direct method. The improved direct method, utilizing Newton Iterative method converges very quickly. But it diverges if the initial guess is not very close to CSNB. So the direct method is performed with the initial values obtained by carrying out the iterative method twice, which is considered most efficient at this time. Since sparsity techniques can be employed, this method is a good choice to a large scale system on-line application. Proposed method has been tested for 5-bus, New England 30-bus system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1735-1736
• /
• 2008

In this research, a riding robot system named as "RideBot" is developed for health-care and entertainments. The developed riding robot can follow the intention of horseman and can simulate the motion of horse. The riding robot mechanisms are used for many functions of attitude detection, motion sensing, recognition, common interface and motion-generations. This riding robot can react on health conditions, bio-signals and intention informations of user. One of the objectives of this research is that the riding robot could catch user motion and operate spontaneous movements. In this paper, we develope the saddle mechanism which can generate 3 degrees-of-freedom riding motion based on the intention of horseman. Also, we develope reins and spur mechanism for the recognition of the horseman's intention estimation and the bio-signal monitoring system for the health care function of a horseman. In order to evaluate the performance of the riding robot system, we tested several riding motions including slow and normal step motion, left and right turn motion.

• 대한소아치과학회지
• /
• 제11권1호
• /
• pp.249-254
• /
• 1984

This is a case report of Crouzon's disease as a kind of craniofacial dysostosis by premature closure of unilateral coronal suture, showed plagiocephalic skull. 5-year-old boy was visited for the treatment of dental caries and oral examination. Physical examination showed hypertelorism, internal strabismus, and saddle nose. Intraoral radiographs showed congenital missing of upper right and left deciduous and permanent lateral incisors. Cephalometric analysis showed shortening the posterior cranial base length, clockwise growth pattern and class III and open bite tendency. Posterior-anterior and submentovertex view showed multiple radiolucencies-digital impression on inner surface of cranial vault. Maxillo-facial and neuro-surgical treatment was required to improvement of facial esthetics and optic complications. Continuous examination was needed to the growth and development.