• Title/Summary/Keyword: sIL-2R

Search Result 736, Processing Time 0.034 seconds

EFFECT OF LIGHT IRRADIATION MODES ON THE MARGINAL LEAKAGE OF COMPOSITE RESIN RESTORATION (광조사 방식이 복합레진 수복물의 변연누출에 미치는 영향)

  • 박은숙;김기옥;김성교
    • Restorative Dentistry and Endodontics
    • /
    • v.26 no.4
    • /
    • pp.263-272
    • /
    • 2001
  • The aim of this study was to investigate the influence of four different light curing modes on the marginal leakage of Class V composite resin restoration. Eighty extracted human premolars were used. Wedge-shaped class Y cavities were prepared on the buccal surface of the tooth with high-speed diamond bur without bevel. The cavities were positioned half of the cavity above and half beyond the cemento-enamel junction. The depth, height, and width of the cavity were 2 mm, 3 mm and 2 mm respectively. The specimens were divided into 4 groups of 20 teeth each. All the specimen cavities were treated with Prime & Bond$^{R}$ NT dental adhesive system (Dentsply DeTrey GmbH, Germany) according to the manufacturer's instructions and cured for 10 seconds except group VI which were cured for 3 seconds. All the cavities were restored with resin composite Spectrum$^{TM}$ TPH A2 (Dentsply DeTrey GmbH, Germany) in a bulk. Resin composites were light-cured under 4 different modes. A regular intensity group (600 mW/${cm}^2$, group I) was irradiated for 30 s, a low intensity group (300 mW/${cm}^2$, group II) for 60 s and a ultra-high intensity group (1930 mW/${cm}^2$, group IV) for 3 s. A pulse-delay group (group III) was irradiated with 400 mW/${cm}^2$ for 2 s followed by 800 mW/${cm}^2$ for 10 s after 5 minutes delay. The Spectrum$^{TM}$ 800 (Dentsply DeTrey GmbH, Germany) light-curing units were used for groups I, II and III and Apollo 95E (DMD, U.S.A.) was used for group IV. The composite resin specimens were finished and polished immediately after light curing except group III which were finished and polished during delaying time. Specimens were stored in a physiologic saline solution at 37$^{\circ}C$ for 24 hours. After thermocycling (500$\times$, 5-55$^{\circ}C$), all teeth were covered with nail varnish up to 0.5 mm from the margins of the restorations, immersed in 37$^{\circ}C$, 2% methylene blue solution for 24 hours, and rinsed with tap water for 24 hours. After embedding in clear resin, the specimens were sectioned with a water-cooled diamond saw (Isomet$^{TM}$, Buehler Co., Lake Bluff, IL, U.S.A.) along the longitudinal axis of the tooth so as to pass the center of the restorations. The cut surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan) at ${\times}$25 magnification, and the images were captured with a CCD camera (GP-KR222, Panasonic, Japan) and stored in a computer with Studio Grabber program. Dye penetration depth at the restoration/dentin and the restoration/enamel interfaces was measured as a rate of the entire depth of the restoration using a software (Scion image, Scion Corp., U.S.A.) The data were analysed statistically using One-way ANOVA and Tukey's method. The results were as follows : 1. Pulse-Delay group did not show any significant difference in dye penetration rate from other groups at enamel and dentin margins (p>0.05) 2. At dentin margin, ultra-high intensity group showed significantly higher dye penetration rate than both regular intensity group and low intensity group (p<0.05). 3. At enamel margin, there were no statistically significant difference among four groups (p>0.05). 4. Dentin margin showed significantly higher dye penetration rate than enamel margin in all groups (p<0.05).

  • PDF

Optimal Water Allocation considering Reservoir Operation Rules (저수지 운영률을 고려한 최적용수배분)

  • Kang Jaewon;Rieu Seung-yup;Cha Donghoon;Ko Ick Hwan
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.1430-1434
    • /
    • 2005
  • 금강 유역과 같이 복잡한 하천유역 시스템의 관리를 위해서는 시스템 요소들을 통합적으로 분석할 수 있는 효과적인 의사결정지원 도구가 필요하다. K-MODSIM 모형은 단기 물관리, 장기 운영계획, 가뭄 대비계획 및 물관련 분쟁 해결을 위해 보다 개선된 유역관리 전략을 수립하기 위한 컴퓨터 기반 도구로 개발되었으며, 본 연구에서는 K-MODSIM 모형에 저수지 운영률을 반영하여 유역의 용수배분을 평가하였다. 유역 저수지군 운영 환경 및 제약조건을 반영한 네트워크를 구성한 후, 두 단계의 모형 검정을 수행하였다. 먼저 물리적 검정을 통해서 전체 대상 수계의 상하류 물수지를 검토하고, 다음 단계인 운영 측면의 검정에서 물리적으로 나타나는 상황이 댐 운영이나 제약 조건 등에 부합하는지의 여부를 검토하였다. 대청댐과 용담댐의 통합 운영을 위한 최적 운영률의 개발은 동적계획법 소프트웨어인 CSUDP를 이용하여 수행하였으며, 여기서 사유한 접근법은 음해 추계학적 동적계획법이다. 이 접근방법은 유입량 시계열을 추계학적으로 모의발생시키고, CSUDP 모형은 모의발생시킨 유입량 시계열에 대한 최적운영률을 찾기 위해 사용하며, CSUDP의 최적화 결과에 대한 통계적인 분석을 통해 월단위 운영률을 도출하였다. K-MODSIM 모형에 저수지 운영률을 반영하여 유역의 용수배분을 평가하였다. 유역 저수지군 운영 환경 및 제약조건을 반영한 네트워크를 구성하고, 대청댐과 용담댐의 통합 운영을 위한 최적연계 운영를을 개발하여 다음과 같은 운영 시나리오들을 개발하고 평가하였다. $\cdot$ 금강수계에 대한 용당댐의 영향 평가 $\cdot$ 댐 연계운영시 수요량 변화에 따른 영향 평가 $\cdot$ 하도추적을 고려한 일별모형의 검증 개발된 운영률과 하도추적방법을 K-MODSIM 모형에서 검증하기 위해서 vb.net 스크립트 파일을 개발하여 적용하였다.L이하로 이를 유등천 상류부에 공급할 경우 유등천의 수질은 BOD 6.7mg/L, TN 9.80mg/L, TP 0.90mg/L를 나타낼 것으로 예측된다. 고도처리시설의 도입 후 금강 합류점에서 갑천의 예측 BOD는 7.4mg/L로 현재 9.0mg/L에 비하여 개선되지만 이는 금강수계 오염총량 관리계획의 시$\cdot$도 경계지점 목표수질인 5.9mg/L를 만족시키지 못하므로, 이를 만족시키기 위해서는 방류수 BOD 7.2mg/L이하로 처리해야 할 것으로 판단된다.which support only concepts or image features.방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조하여 적용할 필요가 있음을 시사하고 있다.교하여 유의한 차이가 관찰되지 않았다. 또한 HSP 환자군에서도 $IL1RN^{*}2$ allele 빈도와

  • PDF

Distribution Characteristics of Heavy Metals for Tidal Flat Sediments in the Saemankeum Area (새만금 갯벌의 중금속 분포 특성)

  • KIM Jong-Gu;YOO Sun-Jae;CHO Eun-Il;AHN Wook-Sung
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.36 no.1
    • /
    • pp.55-61
    • /
    • 2003
  • This study was conducted to evaluate distribution and behavior characteristics of heavy metals for tidal flat sediments in the Saemankeum area. The value of heavy metal contents in the tidal flat sediments were higher than that surveyed in 1994, but showing that it's lower when compared with the value of Shiwha lake. Enrichment factors in the tidal flat sediments showed below 1 except for Pb and Zn. Metal excesses was appeared that Cu, Cr, Fe, Mn lacked and Pb, Zn were high. The correlation analysis between heavy metals and organic matters was found high positive relationship (r=0.424$\~$0.839), especially correlation coefficient between ignition loss and oxide Al, Fe, Mn showed high positive relationship above 0.7. The correlation analysis between Brain size and hear metals was found that as grain size was small, heavy metals contents were increased. Correlation coefficient between silt and heavy metals except for Cu, Pb showed high positive relationship as 0.552$\~$0.732.

Production of Concentrated Blueberry Vinegar Using Blueberry Juice and Its Antioxidant and Antimicrobial Activities (블루베리 농축식초 제조 및 이들의 항산화 및 항균 활성)

  • Oh, Hyeonhwa;Jang, Sowon;Jun, Hyun-Il;Jeong, Do-Youn;Kim, Young-Soo;Song, Geun-Seoup
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.46 no.6
    • /
    • pp.695-702
    • /
    • 2017
  • This study was carried out to investigate the effects of seed vinegar on antioxidant activity and antimicrobial activities of concentrated blueberry vinegar (CBV). Of the nine strains of yeast and six strains of acetic acid bacteria provided by the Microbial Institute for Fermentation Industry, each strain of yeast (Saccharomyces cerevisiae SRCM 100610, showing the highest ethanol content) and acetic acid bacteria (Acetobacter pasteurianus SRCM 101342, showing the highest total acidity) was selected for production of CBVs. Sugar content, pH, total acidity, total phenolic content (TPC), and browning intensity (280 nm and 420 nm) in CBVs using concentrated blueberry juice were $11.05{\sim}12.70^{\circ}Brix$, 2.63~2.98, 1.65~5.72%, 3.03~4.24 mg/mL, 0.95~1.50, and 0.11~0.20, respectively. Sugar content and total acidity of CBVs increased upon addition of seed vinegar, whereas pH, TPC, and browning intensity decreased. Of all CBVs with various additions of seed vinegar, the control showed the lowest $EC_{50}$ values in DPPH radical scavenging assay, ABTS radical scavenging assay, and reducing power (23.80, 19.48, and 79.21 dilution factor, respectively), whereas the 40% seed vinegar group showed the highest clear zone diameter values for Escherichia coli, Staphylococcus aureus, Listeria monocytogenes, and Bacillus cereus (4.31, 4.59, 5.81, and 3.97, respectively). Antioxidant activities of CBVs were closely correlated with their TPC, browning intensity at 280 nm, pH, and total acidity values, showing correlation determination coefficient ($R^2$) values higher 0.82. However, antimicrobial activities of CBVs were closely correlated with their pH and total acidity values, showing higher $R^2$ values more than 0.92. These results suggest that CBVs using concentrated blueberry juice, S. cerevisiae SRCM 100610, and A. pasteurianus SRCM 101342 may be useful as potentially functional foods for enhancing health.

Synthesis and Luminescent Properties of Y(As, Nb, P, V)O4:Eu3+ Red Phosphors by Combinatorial Chemistry Method (조합화학을 이용한 Y(As, Nb, P, V)O4:Eu3+ 적색형광체의 합성 및 광 특성 분석)

  • Jeon, Il Un;Son, Gi Seon;Park, Hui Dong;Ryu, Seung Gon
    • Journal of the Korean Chemical Society
    • /
    • v.45 no.6
    • /
    • pp.577-588
    • /
    • 2001
  • Eu doped YRO$_4$ (R=As, Nb, P, V) red phosphors were prepared by the combinatorial chemistry method. The quaternary material library of tetrahedron-type composition array was designed to investigate the luminescence of the host material under UV and VUV excitations (254, 147 nm). The photoluminescent characteristics of the samples were comparable to the commercially available red phosphors such as (Y, Gd)BO$_3$: $Eu^{3+}$ and Y$_2$O$_3$: In view of the luminescence yield, V rich region was found to be optimum under UV excitation. But the results under VUV excitation were different from those of UV excitation, the samples of the composition containing a large amount of P shows the highest luminescence. Especially, higher luminescence was obtained in $Y_{0.9}$(A$S_{0.06}$N$B_{0.06}P_{0.83}V_{0.06}$) O$_4$: $Eu_{0.1}$ phosphors than commercial (Y, Gd)BO$_3$red phosphors under 147 nm excitation.

  • PDF

Hunters' Attitude toward Natural Environment and Motivation for Hunting Particiation (수렵인의 자연환경태도와 수렵참여 동기)

  • Choi, Yun Hwan;Kim, Seong-Il
    • Journal of Korean Society of Forest Science
    • /
    • v.84 no.1
    • /
    • pp.1-9
    • /
    • 1995
  • This study investigates the collective aspects of hunting motivation and hunters' attitude toward natural environment. Data were collected from three different types of respondents : 148 hunters who purchased hunting license between November 1992 and March 1993 in Cholla Province. 120 university students and 260 Suwon residents. The 26 items out of 90 items were selected to develop an attitude scale toward natural environment. Results of ANOVA revealed that there were significant differences among five groups(hunters, urban residents and students from 3 major fields) in terms of their attitude values. Hunters' attitude value toward natural environment was the highest among five different types of respondents. Two major motives for hunting participation are 'exercise' and 'like out-of-doors'. Factor analysis presents eight motivational dimensions underlying hunter's involvement in the activities: 1)stewardship, 2)social contact, 3)show-off, 4)sportsmanship, 5)like to kill, 6)recreation/relax, 7)economic gain, and 8)being alone. The correlation between the motivational factor of 'economic gain' and the attitudinal item of 'relationship between man and nature' was negative(r=-0.28). There is a positive correlation(r=0.24) between the motivation of 'being alone' and the attitude of 'needs for natural environment'. These relationships indicate that individual's attitude value decreases when one perceives nature as economic goods, while it increases when one visits nature to relieve stress and to develop self-esteem.

  • PDF

La signification du dépassement de soi dans le Thomisme (토미즘의 인간적 행위에서 '자기초월'의 의미)

  • Lee, Myung-Gon
    • Journal of Korean Philosophical Society
    • /
    • v.105
    • /
    • pp.49-74
    • /
    • 2008
  • Le but de notre recherche est $d^{\prime}{\acute{e}}clairer$ la nature du $d{\acute{e}}passement$ de soi aux actes humaines dnas le Thomisme. Dans le Thomisme la nature humaine qui a la raison et la $volont{\acute{e}}$ a une $intentionnalit{\acute{e}}$ ver la fin ultime. De sorte que les actes humaines qui $corr{\grave{e}}spondent$ cette nature humaine a un $caract{\grave{e}}re$ du $d{\acute{e}}passement$ de soi visant toujours plus que le $pr{\acute{e}}sent$. Le fondement de cet acte du $d{\acute{e}}passement$ de soi est $l^{\prime}{\hat{a}}me$ rationelle qui est la forme substantielle de l'homme et de soi subsistante. Chez st. Thomas ce $caract{\grave{e}}re$ du $d{\acute{e}}passement$ a trois ${\acute{e}}taps$ distinctes : (1)le $d{\acute{e}}passement$ dans l'ordre du $progr{\grave{e}}s$ naturel (2)le $d{\acute{e}}passement$ de soi dans l'ordre morale (3)le $d{\acute{e}}passement$ de soi dans l'ordre de la religion. Le $d{\acute{e}}passement$ dans l'ordre du $progr{\grave{e}}s$ naturel apparaît d'abord au $caract{\grave{e}}re$ de $l^{\prime}{\hat{a}}me$ rationelle. St. Thomas $d{\acute{e}}finit$ les vertus rationelles comme $^{\prime}pl{\acute{e}}nitude$ dans le $f{\acute{e}}blesse$, parce qu'il $consid{\grave{e}}re$ la vertu rationelle comme $finalit{\acute{e}}$ des $facult{\acute{e}}s$ du sens $ext{\acute{e}}rieur$. L'homme par le sens $ext{\acute{e}}rieur$ reçoit des $esp{\grave{e}}ces$ sensibles(especies sensibilis), et $poss{\grave{e}}de$ les images. Puis cette images sensible devenant la $r{\acute{e}}alit{\acute{e}}$ spirituelle sous forme du $m{\acute{e}}moire$ et du souvenir, devient aussi la partie de son existence. Donc chez st. Thomas la vertue rationnelle n'est pas simplement un $facult{\acute{e}}$ $sp{\acute{e}}culative$, mais elle est dans l'ordre du devenir et du $pl{\acute{e}}nitude$. A cette raison st. Thomas compare la raison(ratio) comme $g{\acute{e}}n{\acute{e}}ration$(generatio) et l'intelleigence(intellectus) comme ${\hat{e}}tre$(esse). C'est-${\grave{a}}$-dire la raison $d{\acute{e}}passe$ le sensible et l'intelligence $d{\acute{e}}passe$ la raison. Le $d{\acute{e}}passement$ de soi dans l'ordre morale $li{\acute{e}}$ au $progr{\grave{e}}s$ de la conscience. Chez st. Thomas la perception de l'objet $ext{\acute{e}}rieur$ ayant pour but d'avoir conscience de soi, se perfectionne ${\grave{a}}$ ceci. D'avoir conscience de soi signifie d'avoir $l^{\prime}identit{\acute{e}}$ de soi, et de-$l{\grave{a}}$ apparaît l'acte moral en tnat qu'acte $sp{\acute{e}}cifique$ humain. La raison pour laquelle la vie morale elle-$m{\hat{e}}me$ a un $caract{\grave{e}}$ du $d{\acute{e}}passement$, c'est que l'acte humaine qui corresfonde ${\grave{a}}$ $l^{\prime}identit{\acute{e}}$ du soi est une vie qui vise toujours plus que le $pr{\acute{e}}sent$ ou $l^{\prime}id{\acute{e}}al$. Quant au problem du $d{\acute{e}}passement$ dans l'ordre de la religion, chez st. Thomas en raison de $l^{\prime}affinit{\acute{e}}$ entre Dieu et l'homme, $o{\grave{u}}$ il y a des vertues infuses(virtutes infusas), il y a une sorte du $d{\acute{e}}passement$ religieux. Car ces vertues infuses signifie la communication entre Dieu(${\hat{E}}tre$ absolu) et l'homme(${\hat{e}}tre$ fine) et cela signifie le $d{\acute{e}}passement$ de l'humain vers le divin. Cette $id{\acute{e}}e$ thomiste permet de penser que $o{\grave{u}}$ il y a un $d{\acute{e}}passement$ de soi dans la vie religuse d'une personne, il y a une intervention $r{\acute{e}}elle$ de la providence divine. Cette $pens{\acute{e}}e$ thomiste sera alors un $caract{\grave{e}}$ $r{\acute{e}}aliste$ face ${\grave{a}}$ la $pens{\acute{e}}e$ $id{\acute{e}}aliste$ qui n'admette que le $d{\acute{e}}passement$ absolu comme $d{\acute{e}}passement$ religieux.

Relationship between Helicobacter pylori infection and iron-deficiency anemia in infants and children (영유아에서 Helicobacter pylori 감염과 철결핍성 빈혈과의 관계 연구)

  • Son, Meong Hi;Yeom, Jung Suk;Park, Ji Suk;Park, Eun Sil;Seo, Ji Hyun;Lim, Jae Young;Park, Chan Hoo;Woo, Hyang Ok;Youn, Hee Shang
    • Clinical and Experimental Pediatrics
    • /
    • v.52 no.5
    • /
    • pp.544-548
    • /
    • 2009
  • Purpose : To elucidate a potential association between Helicobacter pylori (HP) infection and iron-deficiency anemia (IDA) in infants and children in terms of the other factors related to iron utilization and storage although the association of ferritin was previously studied. Methods : We evaluated 135 infants (aged 6-24 months) admitted at Gyeongsang National University Hospital from 2000 to 2006. Western blot assays using the HP CagA antigen (120 kD) were conducted to identify infections. The concentrations of six parameters were measured: hemoglobin (Hb), serum ferritin, soluble serum transferrin receptors, interleukin-6, prohepcidin, and C-reactive protein. In addition, the infants were classified into IDA, anemia from inflammation (AI), unclassified anemia (UCA), and normal groups on the basis of Hb and ferritin concentrations. Results : In the IDA group (n=20), seven infants were infected with HP, with the other infants showing no evidence of infection. The mean Hb levels in the IDA group were significantly lower in HP-infected infants than those uninfected (7.1 vs. 8.2 g/dL, respectively); the mean ferritin levels were also significantly lower in the infected infants (3.2 vs. $6.8{\mu}g/L$). The other four parameters did not differ significantly among the IDA infants. No correlations were found between the six parameters and HP infection status in the other groups. Conclusion : There were no significant differences in the HP infection rates among the study groups. However, in the IDA group, the HP-infected infants had significantly lower serum ferritin and Hb levels than the HP-negative infants (P<0.05).

Emodin Studies on Anti-inflammatory and Skin Barrier Improvement Activities (Emodin의 항염 및 피부장벽개선 활성 연구)

  • Kim, Se-Gie;Choi, Jae Gurn;Jang, Young-Ah
    • Journal of the Korean Applied Science and Technology
    • /
    • v.38 no.6
    • /
    • pp.1383-1392
    • /
    • 2021
  • It has been reported that emodin, a major pharmacologically active ingredient of herbal medicines such as Polygonum cuspidatum, Polygonum multiflorum, Rheum palmatum, and Aloe vera, is effective in antioxidant, antibacterial, anti-inflammatory, anticancer, and liver protection. In this study, to investigate the potential of emodin to be used as a skin disease and functional material, the activity related to the improvement of inflammation and skin barrier function was confirmed. To observe the anti-inflammatory effect on HaCaT cells, which are human keratinocytes, cytokine inhibition was confirmed by ELISA kit and protein expression by western blot. In HaCaT cells activated with TNF-α (10 ng/mL)/IFN-γ (10 ng/mL), emodin was treated with each concentration (5, 10, 20, 40) µM. As a result, It was confirmed that the production amount of TNF-α, IL-1β and IL-6 decreased as the concentration of emodin increased. In the experimental results on the expression levels of inflammation-related proteins iNOS and COX-2, it was confirmed that 48% of iNOS and 29% of COX-2 were inhibited compared to control at a concentration of 20 µM of emodin. As an indicator of skin barrier function improvement, the mRNA expression level of filaggrin, involucrin, and loricirn and the production amount of filaggrin, involucrin, and loricirn were confirmed. and excellent results were obtained with an emodin concentration-dependent increase. In particular, filaggrin, which was produced twice as much as the control at a concentration of 20 µM, is a protein involved in the formation of NMF, a natural moisturizing factor, and is known to play an important role in moisturizing the stratum corneum. In conclusion, it was confirmed that emodin can be used as a material for improving inflammation and improving skin barrier function, which is part of the potential for use as a skin disease and functional material. It is believed that if additional research is performed in the future, the scope of its application can be further expanded.

Exposure Characteristics of Particles during the After-treatment Processes of Aluminum Oxide Fibers and Nickel Powders (산화알루미늄 섬유와 니켈분말 후처리공정에서 입자의 노출특성)

  • Kim, Jong Bum;Kim, Kyung Hwan;Ryu, Sung Hee;Yun, Seong-Taek;Bae, Gwi-Nam
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.26 no.2
    • /
    • pp.225-236
    • /
    • 2016
  • Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.