• 제목/요약/키워드: sI 하이드레이트

검색결과 8건 처리시간 0.029초

해리가스의 하이드레이트 재생성 억제에 적용할 효과적인 구조I 하이드레이트 억제제 연구 (Study of Effective sI Hydrate Inhibitor on Re-formation of Dissociated Gas)

  • 강성필;이종협;김기섭
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 추계학술대회 초록집
    • /
    • pp.124.2-124.2
    • /
    • 2011
  • 천연의 메탄 하이드레이트를 생산하기 위한 방법으로 몇 가지가 알려져 있으나 최근의 연구 결과로는 감압법이 가장 효과적이며 경제성을 확보할 수 있다고 알려져 있다. 하지만 이 방법을 이용한 메탄 하이드레이트 개발생산 시에는 해리된 물과 가스가 동시에 생산유체로 발생하여 수송되며, 생성수에는 하이드레이트 전구체라고 알려진 미완의 하이드레이트 구조체가 남게 된다. 생산유체는 낮은 해수온도에 노출되어 가스 하이드레이트가 쉽게 재생성될 가능성이 높기 때문에 안정적인 가스 생산과 생산시설의 보호를 위해서는 적절한 가스 하이드레이트 재성성 억제대책이 필요하다. Kinetic 억제제의 적용이 많이 이루어지고 있는 가스전에서의 경험을 바탕으로 투여해 보는 시도를 하고 있지만 sII인 천연가스 하이드레이트에서의 억제효과와 비교하여 저하된 결과가 보고되고 있다. sI과 sII는 메커니즘의 차이로 인해 억제제의 성능이 다르게 나타난다. sI인 메탄 하이드레이트에 대하여 kinetic 억제제의 효과를 살펴보았고 이온성액체를 적용한 효과적인 sI 하이드레이트 억제기법을 보고한다. 또한 기존의 sII 억제제와 혼합하여 시너지효과를 얻을 수 있음을 확인하였다.

  • PDF

Composition and structure analysis of natural gas hydrates

  • 박영준;김도연;박제성;이흔
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.660-662
    • /
    • 2005
  • 본 연구에서는 미 인근 해저에서 ODP로 확인된 부존 하이드레이트 샘플을 다양한 분광학 및 실험적 분석 방법을 통해 시료의 물성 및 특성을 파악하여 부존된 하이드레이트 자원의 성분 파악을 목적으로 하고 있다. 일반적으로 가스 하이드레이트 연구에 있어서 X-ray diffractometer, NMR stectrometer, Raman spectrometer 등 분광학적 분석기기를 이용하여 가스 하이드레이트의 구조 및 성분을 규명한다. 본 연구에서는 실험실에서 인위적으로 만들어진 메탄 하이드레이트와 심해저 천연가스 하이드레이트 층에서 채취된 샘플의 비교 분석을 통하여 심해에 매장되어 있는 천연가스 하이드레이트의 구조 및 성분을 규명하였다 XRD 결과로부터 천연가스 하이드레이트는 sI의 구조를 가지며 NMR 및 Raman 결과에 의하면 하이드레이트 내에 포집되어 있는 가스의 주 성분은 메탄인 것으로 밝혀졌다. 또한 천연가스 하이드레이트를 이용한 이산화탄소의 치환 실험을 통하여 심해저 천연가스 하이드레이트 층의 이산화탄소 저장 매체로의 활용 가능성을 조사하였다.

  • PDF

새로운 수용성 하이드레이트 시스템에 대한 미세 분광학적 분석연구 (Microscopic Analysis on New Water-soluble Hydrate Systems)

  • 이종원
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.215.1-215.1
    • /
    • 2010
  • 가스 하이드레이트는 작은 고체 부피 내에 막대한 양의 가스를 저장할 수 있다는 특성으로 인하여, 최근 천연가스 혹은 메탄의 저장 매체로 활용하기 위한 연구가 활발히 진행중에 있다. 하지만 실제 응용을 위해서는 미세구조 분석이 수행되어 하이드레이트 형태로 저장할 수 있는 정확한 저장 용량을 파악할 필요가 있다. 본 연구에서는 여러가지의 고리형 에테르, 고리형 에스테르 및 고리형 케톤 화합물들을 테스트하여 메탄 가스와 반응하는 6가지의 새로운 sII 혹은 sH 하이드레이트 형성제를 파악하였다. 또한 새로이 발견된 형성제 모두에 대하여 하이드레이트 상평형도 측정하였다. 얻어진 상평형 데이터는 하이드레이트 안정영역과 게스트 분자 크기 간에 뚜렷한 상관관계가 있음을 입증하였다. 아울러 형성된 하이드레이트 샘플은 고체 분말 X-선 회절과 고체상 13C NMR 분석을 수행하여 하이드레이트 구조와 게스트 포집률을 조사하였다. 마지막으로, 비슷한 화학 구조식을 갖고 있음에도 2-methyltetrahydrofuran과 3-methyltetrahydrofuran, 혹은 4-methyl-1,3-dioxane과 4-methyl-1,3-dioxolane은 서로 다른 하이드레이트 결정 구조를 보여 주었는데, 이러한 차이는 하이드레이트 결정 구조를 결정짓는 게스트 분자 크기, 즉 임계 게스트 분자 크기를 파악하는 데에도 매우 유용한 정보를 제공할 수 있을 것이라 판단된다.

  • PDF

계면활성제 첨가에 따른 가스하이드레이트 생성 결정과 $^{13}C$ NMR 구조 분석 고찰 (Investigation of Gas Hydrate Crystallization and Structure Analysis by $^{13}C$ NMR with Surfactant)

  • 조병학;이영철;신명욱;이성한
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 춘계학술대회
    • /
    • pp.395-398
    • /
    • 2006
  • 동일한 조건에서 순수한 물과 계면활성제인 DBS(dodecyl bezebe sulfonic acid) 25ppm을 첨가한 물에 대해 천연가스 하이드레이트를 제조시 가스의 함유량은 각각 80배와 160배로 2배의 차이가 발생한다. 이에 대해 본 연구에서는 결정 생성 형태의 관찰 및 $^{13}C$ NMR을 사용한 분광학적 구조 분석으로부터 이의 원인을 찾고자 하였다. 순수한 물과 DBS를 미량 함유한 물을 사용하여 whiskery 결정을 생성시킨 결과, 순수한 물을 사용한 경우보다 섬유 다발 형태가 매우 활발한 형태의 결정 형태로 가스하이드 레이트가 생성됨을 알 수 있었다. 또한 400MHz의 NMR을 사용한 분광학적 구조 분석으로부터 천연가스하이드레이트는 구조-I과 구조-II가 혼재된 결정 구조를 이루고 있음을 알 수 있었다. 또한 DBS를 함유한 물에 의해 제조된 천연가스하이드레이트는 arge cage를 많이 생성시키는 역할을 하는 분석 결과를 보였고 이것이 가스 함유량을 증대시키는 원인 중의 하나임을 알 수 있었다.

  • PDF

sI 천연 메탄하이드레이드의 존재 : 결정구조 변화의 분광학적 분석 (Preponderant Occurrence of sl natural methane hydrates: Spectroscopic analysis of crystalline structure transition)

  • 연순화;설지웅;이흔
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 춘계학술대회
    • /
    • pp.387-390
    • /
    • 2006
  • We report here that under strong attacksof external $CH_4$ guest molecules the sII and sH methane hydrates are structurally transformed to the crystalline me framework of sI, leading to favorable change of the lattice dimension of the host-guest networks. The High Power Decoupling $^{13}C$ NMR and Raman spectroscopies were used to identify structure transitions of the mixed $CH_4+C_2H_6$ hydrates (sIIl) and hydrocarbons (methylcyclohexane, isopentane) + $CH_4$ hydrates (sH). The resulting spectra indicate that most of the synthesized sII and sH hydrates were transformed to methane hydrate of sl under 110 bar and particularly the coexistence of sl with sII or sH appear according to the surrounding methane-rich gas conditions. The present findings might be expected to Provide rational evidences regarding the preponderant occurrence of naturally-occurring sI methane hydrates in marine sediments.

  • PDF

n-Pentane & n-Hexane as Coguests of sH Hydrates in the Mixture with 2,2-Dimethylbutane and Methane

  • 이종원
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 추계학술대회
    • /
    • pp.58-61
    • /
    • 2006
  • n-Pentane and n-hexane, previously regarded as non-hydrate formers, are found to form structure H hydrate in mixtures with 2,2-dimethylbutane. Even though they are thought to be too large to fit into the largest cage of the structure H hydrate, powder XRD and NMR measurements show that they form gas hydrates in mixtures with other sH hydrate former. These findings are of fundamental interest and also will impact the composition and location of natural gas hydrates and their potential as global energy resource and climate change materials.

  • PDF

비선형 탄성파 파동장 역산 방법에서 탄성파 변수 세트에 관한 정보의 수치적 연구 (Numerical studies of information about elastic parameter sets in non-linear elastic wavefield inversion schemes)

  • 주정 명남
    • 지구물리와물리탐사
    • /
    • 제10권1호
    • /
    • pp.1-18
    • /
    • 2007
  • 비선형 파동장 역산은 지하의 암석과 물성을 결정하는 물리적인 제약을 위한 탄성파 변수들을 평가하는데 강력한 방법이다. 이 논문에서는 현장자료와 2 차원 탄성파 속도 모델로부터 탄성파 속도 변화를 재구성하여 만들어낸 6 가지 탄성파 속도 모드를 제시하였다. 탄성파 반사파 자료의 정보는 종종 단파장과 장파장 성분으로 나뉘어진다. 지역검색 방법은 만약 초기모델이 실제 모델로부터 동떨어지면 장파장의 속도 변화를 측정하는데 어렵다. 그러면 송신주파수들은 낮은 대역에서 더 높은 대역들로 모델의 탄성파 변수들을 측정하기 위해 변환된다 (frequency-cascade scheme) 탄성파 변수들은 P 파와 S 파 속도가 섬도에 따라 선형으로 변화는 초기 모델 가정하에 각 역산단계에서 (simultaneous mode) 계산된다. P 파와 S 파 속도 $('V_P\;V_S\;mode')$, P 파 임피던스와 포와송 비 $('I_P\;Poisson\;mode')$, P 파와 S 파 임피던스 $('I_P\;I_S\;mode')$와 같은 세가지 모드들이 탄성파 변수들의 역산을 위해 얻어진다. 각 탄성파 역산 단계에서 밀도값들은 세가지 가정하에 개선(update)된다. 탄성파 모델을 위한 각 변수 세트들에서 역산의 정확도를 평가한 결과 $V_P\;V_S$ 모드와 $I_P$ Poisson 모드 사이에 별다른 역산 차이는 없었다. $I_P\;I_S$ 모드들에 대해서도 같은 결론이 예상된다. 이러한 결과들은 전 파장에 걸친 탄성파 파동장 역산의 견고한 기초를 제공한다.

가스 하이드레이트 부존층의 구조파악을 위한 탄성파 AVO 분석 AVO모델링, AVO역산 (Seismic AVO Analysis, AVO Modeling, AVO Inversion for understanding the gas-hydrate structure)

  • 김건득;정부흥
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.643-646
    • /
    • 2005
  • The gas hydrate exploration using seismic reflection data, the detection of BSR(Bottom Simulating Reflector) on the seismic section is the most important work flow because the BSR have been interpreted as being formed at the base of a gas hydrate zone. Usually, BSR has some dominant qualitative characteristics on seismic section i.e. Wavelet phase reversal compare to sea bottom signal, Parallel layer with sea bottom, Strong amplitude, Masking phenomenon above the BSR, Cross bedding with other geological layer. Even though a BSR can be selected on seismic section with these guidance, it is not enough to conform as being true BSR. Some other available methods for verifying the BSR with reliable analysis quantitatively i.e. Interval velocity analysis, AVO(Amplitude Variation with Offset)analysis etc. Usually, AVO analysis can be divided by three main parts. The first part is AVO analysis, the second is AVO modeling and the last is AVO inversion. AVO analysis is unique method for detecting the free gas zone on seismic section directly. Therefore it can be a kind of useful analysis method for discriminating true BSR, which might arise from an Possion ratio contrast between high velocity layer, partially hydrated sediment and low velocity layer, water saturated gas sediment. During the AVO interpretation, as the AVO response can be changed depend upon the water saturation ratio, it is confused to discriminate the AVO response of gas layer from dry layer. In that case, the AVO modeling is necessary to generate synthetic seismogram comparing with real data. It can be available to make conclusions from correspondence or lack of correspondence between the two seismograms. AVO inversion process is the method for driving a geological model by iterative operation that the result ing synthetic seismogram matches to real data seismogram wi thin some tolerance level. AVO inversion is a topic of current research and for now there is no general consensus on how the process should be done or even whether is valid for standard seismic data. Unfortunately, there are no well log data acquired from gas hydrate exploration area in Korea. Instead of that data, well log data and seismic data acquired from gas sand area located nearby the gas hydrate exploration area is used to AVO analysis, As the results of AVO modeling, type III AVO anomaly confirmed on the gas sand layer. The Castagna's equation constant value for estimating the S-wave velocity are evaluated as A=0.86190, B=-3845.14431 respectively and water saturation ratio is $50\%$. To calculate the reflection coefficient of synthetic seismogram, the Zoeppritz equation is used. For AVO inversion process, the dataset provided by Hampson-Rushell CO. is used.

  • PDF