• Journal of KIISE:Software and Applications
• /
• v.26 no.1
• /
• pp.106-106
• /
• 1999

When we design real-time software target system is analyzed and then we structure sequential executive modules into concurrent tasks. As a result of the analysis, control flow and dataflow diagram based on the RTSA notation is produced. This diagram is structured into concurrenttasks under the condition that performance problem is not serious. The criteria structuring concurrenttasks are introduced as Concurrent Design Approach for Real-Time System(CODARTS) by Gomaa.But structuring concurrent tasks using the criteria of CODARTS is somewhat difficult because thecriteria are dependent on designer's experience. CODARTS is an wide-range and abstractmethodology. As a result, the design can be inconsistent and peoples can understand it differently Inthis paper, we restructure the CODARTS methodology, propose a revised CODARTS structure andrepresent the task structuring steps for this new framework to overcome the understanding andinconsistency problems. The revised CODARTS framework and task structuring steps can be used toautomate the design of real time concurrent software systems. Finally, we show an example of taskstructuring in revised CODARTS framework.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.495-500
• /
• 2003

The vibration of a flexible cantilever tube with nonlinear constraints when it is subjected to flow internally with fluids is examined by experiment and theoretical analysis. These kind of studies have often been performed that finds the existence of chaotic motion. In this paper, the important parameters of the system leading to such a chaotic motion such as Young's modulus and coefficient of viscoelasticity in tube material are discussed. The parameters are investigated by means of a system identification so that comparisons are made between numerical analysis using the parameters of a handbook and the experimental results. The chaotic region led by several period-doubling bifurcations beyond the Hopf bifurcation is also re-established with phase portraits and bifurcation diagram so that one can define optimal parameters for system design.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.1029-1034
• /
• 2002

Object of this paper are numerical and experimental evaluation of Korean Standard Train Loading(L-loading scheme) with respect to UIC's and real train loading, quantitative formulation of the real train types in South Korea. These objects are require to changing environment of train operation, for example, high density traffic and gradual train speed increase. For the reasonable repair, reinforcement and rehabilitation of existing railway infrastructures, statistical analysis of the loading effect during the long term experiment in conventional lines have to conduct. Statistical quantitative formulation of the loading case need to consistency numerical evaluation of the railway safety. Hereafter, those results will be core technical data for the economy enhancement of international line construction. Further, these results are using to make track maintenance criterions for transcontinental, speed up railway and revision of standard train leading diagram.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.521-524
• /
• 2001

학사행정 업무분야는 학교업무의 전산화에 있어서 가장 중요한 요소가 되며, 이를 인터넷에 접목하여 사용하면서 최대의 효과를 부가시키고있다. 즉, 인터넷을 응용하여 원거리의 학생에 관한 학교업무에 편리성과 효율성을 주고 있다. 이에, 본 논문에서는 전체 학사행정업무 중에서 성적조회와 수강신청 및 변경에 관한 업무를 온라인 상에서 할 수 있도록 하는 학사지원시스템을 선계 및 구현하였다. 이는, 학생모드와 관리자 모드로 나누었으며, 학생모드에서는 성적조회와 수강신청을 수행하고 관리자모드에서는 수강기간 입력 및 변경업무를 수행 할 수 있도록 하였다. 이를 위하여, 본 논문의 시스템분석에서는 UML을 이용하여 Use Case Diagram, Sequence Diagram등을 작성하였다. 이를 통하여, 시스템 개발에서는 ASP를 이용하여 구현하였으며, 데이터베이스는 MS-ACCESS를 이용하였다. 또한, 웹 문서의 효율적인 활용을 위하여 부분적으로 Java Script 언어를 사용하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.139-142
• /
• 2002

제어 시스템에서 제어기를 설계하는 방법에는 기존 PID 설계 기법인 Ziegler-Nichols와 Jung, R. C. Dorf 방법들이 있다. 본 논문은 Shunji Manabe의 계수도법(CDM Coefficient Diagram Method)을 이용하여 Ball-Beam 시스템을 제어하기 위한 PID 제어기를 설계한다. PID 제어기의 각 파라메터인 P, I, D 계수는 시스템의 속도와 안정성에 기인하는 표준 안정도 지수$(\gamma)$와 등가시정수$(\tau)$ 로부터 얻 어진다. 등가시정수$(\tau)$와 안정도 지수$(\gamma)$는 제어기 파라메터의 대수적 형태와 절대적인 관계가 있다. 그러므로 설계된 제어기로부터 빠른 상승시간과 안정된 정상상태 응답을 얻을 수 있다. Ball-Beam 시스템에 CDM 제어기를 적용한 결과 시스템의 안정도, 정확성 그리고 강인성에 있어서 퍼지 제어기나 PID 제어기에 비해 뛰어난 응답 특성을 확인하였다

• Journal of Pharmaceutical Investigation
• /
• v.18 no.4
• /
• pp.175-180
• /
• 1988

The role and effect of aluminum tristearate in microencapsulation were investigated based on the dispersion system of ethambutol hydrochloride in acetone-liquid paraffin. Eudragit RS was used as a wall-forming material. Eudragit RS microcapsules prepared using aluminum tristearate were uniform, free-flowing particles. The phase diagram of ethambutol hydrochloride-Eudragit RS-aluminum tristearate indicated that spherical microcapsules ranging from 250 to 1400 ${\mu}m$ in diameter could be prepared only in a very limited region. Instrumental analysis using an energy dispersive-type X-ray microanalyser and a scanning electron microscope showed that aluminum tristearate was localized near the surface of microcapsules. From these results, it was presumed that aluminum tristearate reduced the phase tension between Eudragit microcapsules and liquid paraffin. The dissolution rates of ethambutol hydrochloride from Eudragit RS microcapsules were consideraly lower than those from ethambutol hydrochloride powders and decreased as the amount of aluminum tristearate decreased.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.9 no.1
• /
• pp.19-24
• /
• 2003

We study on the phase diagram of the polymer blend. For this purpose, one PS (polystyrene) and two PI(polyisoprene) were employed whose molecular weights were low enough to make the experimental determinations possible. The weight-average molecular weight(Mw) of PS was 2514, and Mws of two PIs were 2700. Interaction energy density (IED) of the Flory-Huggins lattice theory was defined as a function of temperature and composition, and the consequent equations for the binodal, and critical points were derived. By fitting the experimental binodal points to the derived binodal curve with a nonlinear regression method, the expression for the IED was determined. And the expression for the IED obtained from this study was compared with those reported in the literatures. Also were discussed the importance of accuracy in the expression the IED, and the IED's dependency on the temperature, composition and molecular weights.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.556-559
• /
• 2008

In this study, the failure in circular cup deep drawing simulation at warm temperature is predicted using forming limit diagram (FLD). The FLD is used in sheet metal forming analysis to determine the criterion for fracture prediction. The simulation with heat transfer of circular cup deep drawing at warm temperature was conducted. To predict the failure, the simulation with heat transfer used FLD at temperature in the vicinity of maximum thinning. The result of the simulation with heat transfer shows that the drawn depth increases with increasing temperature and is in accord with the experimental results above $150^{\circ}C$. The FLD provides a good guide for the failure prediction of warm forming simulation with heat transfer.

• Economic and Environmental Geology
• /
• v.11 no.1
• /
• pp.1-9
• /
• 1978

The study is on petrology and petrochemistry of Pajoo Acidic Igneous pluton which intruded into Precambrian metasediments of basement of the area. The geologic sequence of studied area was shown in table 1 and 10 modal analyses and 7 chemical analyses on the rock samples taken from the body. Pajoo Acidic Igneous rock consist of hypersthene-quartz-diorite and porphyritic adamellite which based on the classification of the subcommision on systematics of igneous rocks of IUGS. And porphyritic adamellite which occured as a small stock was intruded into hypersthene quartz diorite. The rock forming minerals of hypersthene quartz diorite are composed of plagioclase, perthite, quartz, hypersthene, hornblende, biotite and porphyritic adamellite is composed of perthite, quartz, plagioclase and biotite. And the former is hypidiomorphic granular texture and later is porphyritic texture with microcline phenocrysts. In silica-oxides variation diagram, the Pajoo acidic igneous rocks are similar to the trend of Daly's average composition and equivalent to the calc-alkalic rock series. In AMF diagram, these rocks are stock of fissure filling vein type by cooling in magmatic differentiation.

• Structural Engineering and Mechanics
• /
• v.91 no.3
• /
• pp.239-250
• /
• 2024

With the aim to provide better predication about fracture behavior, a numerical simulating strategy based on the rigid spring model is proposed for reinforced concrete (RC) structures in this study. According to the proposed strategy, concrete is partitioned into a series of irregular rigid blocks based on the Voronoi diagram, which are connected by interface springs. Steel bars are simulated by bar elements, and the bond slip element is defined at bar element nodes to describe the interaction between reinforcement and concrete. A concrete damage evolution model based on the separation criterion is adopted to describe the weakening process of interface spring between adjacent blocks, while a nonlinear bond slip model is introduced to simulate the synergy behaviour of reinforced steel bars and concrete. In the damage evolution model of concrete, the influence of compressive stress perpendicular to the interface on the shear strength is considered. To check the effectiveness and applicability of the proposed modelling, experimental and numerical studies about a simply-supported RC beam and the two-notched concrete plates in Nooru-Mohamed's experiment are conducted, and the grid sensitivity are investigated.