• 한국지구과학회지
• /
• 제22권3호
• /
• pp.163-178
• /
• 2001

소백산육괴의 서남부에 위치한 승주-순천 지역에는 화강편마암, 반상변정질편마암, 우백질편마암이 우세하게 분포한다. 이들 정편마암은 연구지역에서 순차적인 관입관계를 보여준다. 이 연구는 이 세 정편마암들의 원암인 화강암질암의 지구화학적특징과 지구조적인 환경을 파악하고자 하였다. 실리카-알칼리 IUGS 분류도에 의하면 반상변정질 편마암은 섬록암에서 화강섬록암 영역에 속하고, 화강편마암과 우백질편마암은 화강섬록암과 화강암 영역에 걸쳐 점시된다. 주성분원소의 여러 특성은 본 편마암류의 원암은 비알칼리암이며, 동시충돌형 구조장에서 형성된 S형의 마그마임을 지시한다. 고장력원소를 이용한 구조장 판별도에서는 본 편마암류의 근원암이 칼크알칼리암계열의 화강암류이며, 동시충돌형 구조장에서 형성되었음을 지시한다.

• 대한전자공학회논문지
• /
• 제27권10호
• /
• pp.68-77
• /
• 1990

본 논문에서는 CAD 시스템의 신경망을 이용한 자동 입력기 구축을 위한 논리 심볼 인식방법을 제시한다. 손으로 작성한 도면을 인식하기 위해 특징 추출과 log mapping, 그리고 패턴 인식의 다단계 과정을 거친다. 각 논리 심볼의 현태 정보를 추출하기 위해 억제 가중치를 학습할 수 있는 경쟁 학습법을 제안하고 회전과 크기의 변화를 병진된 결과로 나타내는 log mapping을 하고 형태가 변한 심볼을 인식할 수 있도록 겹쳐지는 수용야(Receptive field)를 준비하여 error back propagation을 이용한 다층망으로 심볼을 인식한다.

• 한국의사학회지
• /
• 제31권1호
• /
• pp.23-42
• /
• 2018

This study examines the variation in diagrams of the kidney, and the effects on location of the Life Gate as a result. My study analyzes diagrams of kidney form and location, such as appearance, the vertebral spine, ShenXi, and "Life Gate", and also explores the causes for such variations. The kidney is commonly described as having the shape of a bean, which throughout medical history has showed almost no variation. The spine was initially described with a total of 21 vertebrae, and later with a range of 19-25 vertebrae. Regarding the height of kidney in relationship to the spine, it was initially described as beginning at the 14th vertebrae, and later changed to the 15th or 17th vertebrae. However, there have been no changes in the perception of the height of kidney. Initially, the location of the Life Gate could not be identified. Three different suggestions of its location were found throughout historical literature, including: (1) at or within the right kidney; (2) between two kidneys; and (3) between 14th-15th spine. There were also variations noted in the process of copying diagrams of kidney in many books not only because the work of copying was not precise, but also because each medical practitioner had a different interpretation of the kidney's form and function in Traditional Korean and Chinese Medicine. It appears that some practitioners may have been influenced by their understandings of theory of Life Gate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.134-139
• /
• 2005

This paper presents a robust design of vehicle interior noise using Taguchi method and a substructure synthesis method with a hybrid model. Firstly, the proposed method identifies the critical process of the concerned interior noise through a TPA (Transfer Path Analysis). Secondly, a strategy for a robust design is discussed, in which the major noise factor among uncertainties in the process is quality distribution of rubber bushes connecting a cradle and a trimmed body. Thirdly, a virtual test model fer the process is developed by applying a substructure synthesis method with a hybrid modeling approach. Fourthly, virtual tests are carried out according to the predefined tables of orthogonal array in Taguchi robust design process. The process was performed under 2 sub-steps. The first step is sensitivity analysis of 31 panels, and the other step is weight optimization of mass dampers on sensitive panels. Finally, two vehicles with the proposed countermeasures were validated. The proposed method reduces 87.5% of trials of measurements due to the orthogonal arrays and increases robustness by 8.6dB of S/N ratio and decreases $5\;dB(A){\sim}10\;dB(A)$ of interior noise in the concerned range of RPM.

• 인문언어
• /
• 제6권
• /
• pp.185-211
• /
• 2004

Korean linguistics or linguistics In Korea has the viviparous limitation that on the one hand, it was influxed from Europe and Japan and on the other hand, these days the American linguistics takes the initiative in Korea. That's why Korean linguistics cannot be free of the problems of 'dependence/independence', 'central/marginal', etc. It calls for two conditions to study the nature of Korean itself and to establish the independence of Korean linguistics in this situation. The first condition is that we should reveal some peculiarities of Korean in itself. The second condition is that we should reveal universals of Korean by comparing it objectively with other languages which are typologically and genealogically different. 1 think the first is important but the latter is more important. To meet the second condition, we analysed the expansion structure of NP in Korean and French, and suggested a new tree-diagram for describing equivalently the NP structure of the two languages. As for VP structure, we suggested some possibilities of comparing the final endings in Korean with personal pronouns in French, and of comparing the prefinal ending 'si' in Korean with the second plural pronoun 'vous', etc. As a result of the comparison of Korean and French, we came to conclusion that Korean is a inflectional agglutinative language while French is a agglutinative inflectional one. In other words, they are same in 'typus', are different in 'topos'. This may be a surprising/unexpected conclusion. But this, we think, can lead us to much closer approach to the nature of the two languages Korean and French.

• 대한전자공학회논문지
• /
• 제8권2호
• /
• pp.24-33
• /
• 1971

부성특성회로로서 쌍트랜지스터 회가의 양에미터단자사이에 용량 C와 저항 R의 병렬회로를 삽입하고, 표준화주파수의 단형파전류원를 에미터·바이어스전류원으로 하여 쌍회로를 구동하면, RC병렬회로는 정부변조회로의 적분회로로서 동작시킬 수 있다. 이 적분회로와 직렬로 신호파전압원을 접속시키면 쌍회로가 구동전원의 표준화펄스에 의하여 구동될 때 마다, RC 적분회로의 적분전압과 신호파전압이 서로 비교되기 때문에 그들의 차전압에 의하여 쌍회로의 트랜지스터들 중의 어느 한 쪽이 ON되기 때문에 그 베이스결합저항단자에는 one bit의 펄스가 송출된다. 본실험에서는 극히 간소한 회로구성을 갖는 쌍트랜지스터회로에 의한 정착변조회로를 제시하고 그들의 특성을 부기하였다. 정착변조파의 품질 혹은 S/N비의 향상을 위하여 고려하여야 할 문제로서, 적분회로의 회로정수 및 양자화전압의 구동펄스의 파고와 파폭의 관계를 검토한다.

• Tribology and Lubricants
• /
• 제31권3호
• /
• pp.109-124
• /
• 2015

This paper presents a wear analysis procedure for the journal bearings on a stripped-down single-cylinder engine during start-up and coast-down by motoring. A journal bearing is in the mixed elastohydrodynamic (EHL) lubrication region when the shaft speed is less than the corresponding lift-off speed. Below the lift-off speed, a wear scar can form on bearing surfaces. In part 1 of this paper, we develop the appropriate formulations and the calculation procedure for the analysis. Specifically, we formulate an equation for modified film thickness in a journal bearing considering the additional wear volume. In order to obtain the modified specific wear rate induced by the modified Archard’s wear coefficient, we utilized the extended non-dimensional diagram for the specific wear rate, k, the fractional film defect coefficient, Ψ and the asperity load sharing factor, γ₂. This asperity load sharing factor is newly calculated by setting the Zhao-Maietta-Chang (ZMC) asperity contact pressure equation coupled with the central film thickness equation derived by using the ZMC asperity contact model equal to the modified central contact pressure derived by using the central (or maximum) contact pressure at the dry rough line-contact configuration. We can use the procedure introduced in this paper to determine the lifetime (or longterm) linear wear in radial journal bearings that is a result of repeated stop-start cycles.

• 한국물환경학회지
• /
• 제24권6호
• /
• pp.682-689
• /
• 2008

The purpose of this study was to find out the variation between molecular size distribution (MSD) of natural organic matter (NOM) in raw waters after different water treatment processes like conventional process (coagulation, flocculation, filtration) followed by advanced oxidation process (ozonation, GAC adsorption). The MSD of NOM of Suji pilot plant were determined by Liquid Chromatography-Organic Carbon Detection (LC-OCD) which is a kine of high-performance size-exclusion chromatography (HPSEC) with nondispersive infrared (NDIR) detector and $UV_{254}$ detector. Five distinct fractions were generally separated from water samples with the Toyopearl HW-50S column, using 28 mmol phosphate buffer at pH 6.58 as an eluent. Large and intermediate humic fractions were the most dominant fractions in surface water. High molecular weight (HMW) matter was clearly easier to remove in coagulation and clarification than low molecular weight (LMW) matter. Water treatment processes removed the two largest fractions almost completely shifting the MSD towards smaller molecular size in DW. No more distinct variation of MSD was observed by ozone process after sand filtration but the SUVA value were obviously reduced during increase of the ozone doses. UVD results and HS-Diagram demonstrate that ozone induce not the variation of molecular size of humic substance but change the bond structure from aromatic rings or double bonds to single bond. Granular activated carbon (GAC) filtration removed 8~9% of organic compounds and showed better adsorption property for small MSD than large one.

• Progress in Superconductivity
• /
• 제11권2호
• /
• pp.83-86
• /
• 2010

There are theoretical and experimental evidences for the pseudo-gap in electron doped cuprates being due to interaction between electrons and anti-ferromagnetism(AFM). A remaining issue is on how AFM correlates with pseudo-gap, and eventually with superconductivity. To elucidate the issue, we have performed temperature dependent angle-resolved photoemission studies of an e-doped cuprate superconductor $Sm_{2-x}Ce_xCuO_4$(SCCO) x=0.18 at 20K and 150K. In the case of $Nd_{2-x}Ce_xCuO_4$, the most well known e-doped cuprate, pseudo-gap disappears at around 100 K for x=0.17. Our experimental result reveals that the pseudo-gap of SCCO exists even at 150K for x=0.18. This result implies that the AFM of SCCO survives even in x=0.18, which agrees with previously reported phase diagram of SCCO. Yet, the superconductivity disappears around x=0.18 for both NCCO and SCCO in spite of the difference in the magnetic order. This result sheds a light on the disappearance of superconductivity on the over-doped side.

• 과학기술학연구
• /
• 제11권2호
• /
• pp.67-96
• /
• 2011

그동안 시각 이미지 연구들은 풍부한 세부 사항을 담은 사진으로부터 특정한 과학자의 주장을 담은 다이어그램까지 이어지는 시각적 연쇄(visual chain)에 주목해왔다. 이 때 시각적 연쇄의 양 끝에 위치한 사진과 다이어그램은 서로 다른 종류의, 다른 성격을 지닌 시각 이미지로 여겨졌다. 그러나 이 글에서 소개할 현미경 사진은 제작 과정에서 불필요한 세부 사항이 제거되고, 특정한 정보를 담은 다이어그램과 같은 성격을 띠게 된다. 사례로 다룬 현미경 사진은 풍부한 세부사항을 담기 때문에 객관적이라 여겨지는 시각적 연쇄의 사진에 대입되지 않는 것이다. 그렇다면 이 현미경 사진이 사진으로서 객관성을 유지할 수 있는 원동력은 무엇일까? 이 글은 국내의 한 실험실이 겪었던 현미경 사진의 변화를 추적한다. 후발 그룹인 실험실이 경험한 현미경 사진 향상은 선도 그룹과의 직접 접촉을 통해 전달받은 표본 제작법 때문이었다. 표본 제작법은 암묵지로서 논문에서 상당 부분 감추어지며, 이 때문에 현미경 사진은 자신에게 특정한 의미를 부여했던 탄생 배경으로부터 분리되어 객관성을 유지할 수 있게 된다. 사례로 다룬 현미경 사진이 다이어그램과 같은 성격을 지니며 동시에 사진으로서 객관성을 유지할 수 있었던 원동력을 표본 제작법에서 찾을 수 있다. 이 글은 표본 제작법에 주목하여 기존 연구에서는 강조되지 못했던 현미경 사진의 새로운 측면을 드러내고 있다.