• Journal of Korean Neurosurgical Society
• /
• 제57권2호
• /
• pp.82-87
• /
• 2015

Objective : The aim of this study was to investigate voluntary wheel running behavior in the unilateral 6-hydroxydopamine (6-OHDA) rat model. Methods : Male Sprague-Dawley rats were assigned to 2 groups : 6-OHDA group (n=17) and control group (n=8). The unilateral 6-OHDA rat model was induced by injection of 6-OHDA into unilateral medial forebrain bundle using a stereotaxic instrument. Voluntary wheel running activity was assessed per day in successfully lesioned rats (n=10) and control rats. Each behavioral test lasted an hour. The following parameters were investigated during behavioral tests : the number of running bouts, the distance moved in the wheel, average peak speed in running bouts and average duration from the running start to the peak speed. Results : The number of running bouts and the distance moved in the wheel were significantly decreased in successfully lesioned rats compared with control rats. In addition, average peak speed in running bouts was decreased, and average duration from the running start to the peak speed was increased in lesioned animals, which might indicate motor deficits in these rats. These behavioral changes were still observed 42 days after lesion. Conclusion : Voluntary wheel running behavior is impaired in the unilateral 6-OHDA rat model and may represent a useful tool to quantify motor deficits in this model.

• 한국운동역학회지
• /
• 제30권2호
• /
• pp.145-154
• /
• 2020

Objective: The purpose of this study was to determine the relationship between impact and shear peak force, and tibia-accelerometer variables during running. Method: Twenty-five male heel strike runners (mean age: 23.5±3.6 yrs, mean height: 176.3±3.3 m/s, mean mass: 71.8±9.7 kg) were recruited in this study. The peak impact and anteroposterior shear forces during treadmill running (Bertec, USA) were collected, and impact shock variables were computed by using a triaxial accelerometer (Noraxon, USA). One-way ANOVA was used to test the influence of the running speed on the parameters. Pearson's partial correlation was used to investigate the relationship between the peak impact and shear force, and accelerometer variables. Results: The running speed affected the peak impact and posterior shear force, time, slope, and peak vertical and resultant tibial acceleration, slope at heel contact. Significant correlations were noticed between the peak impact force and peak vertical and resultant tibia acceleration, and between peak impact average slope and peak vertical and resultant tibia acceleration average slope, and between posterior peak (FyP) and peak vertical tibia acceleration, and between posterior peak instantaneous slop and peak vertical tibial acceleration during running at 3 m/s. However, it was observed that correlations between peak impact average slope and peak vertical tibia acceleration average slope, between posterior peak time and peak vertical and resultant tibia acceleration time, between posterior peak instantaneous slope and peak vertical tibial acceleration instantaneous slope during running at 4 m/s. Conclusion: Careful analysis is required when investigating the linear relationship between the impact and shear force, and tibia accelerometer components during relatively fast running speed.

• 대한영양사협회학술지
• /
• 제7권1호
• /
• pp.50-55
• /
• 2001

Running smoking, no-smoking area in restaurants(n=546) in 25 districts in Seoul area was surveyed and evaluated. No-smoking restaurants were evaluated as A(2.0 points). Restaurants running no-smoking area with guidance to the customers were evaluated as B(1.7 points), and those without guidance as C(1.4 points). In case of the distinction of smoking or no-smoking area are not clear, it was evaluated as D(1.1 points). Restaurants which are not running no-smoking area were scored E(0.8 points). Western style restaurants scored average of 1.55points, which was significantly higher than that of Korean, Chinese or Japanese style ones(average of 1.24~1.27 points). The highest mean score for restaurant 1.625 points in Songpa-gu(district).

• Journal of Computing Science and Engineering
• /
• 제5권4호
• /
• pp.283-287
• /
• 2011

Due to the proliferation of software parallelization on multi-core CPUs, the number of concurrently executing processes is rapidly increasing. Unlike processes running in a server environment, those executing in a multi-core desktop or a multi-core mobile platform have various correlations. Therefore, it is crucial to consider correlations among concurrently running processes. In this paper, we exploit the property that for a given created location in the binary image of the parent process, the average running time of child processes residing in the run-queue differs. We claim that this property can be exploited to improve the overall system performance by running processes that have a relatively short running time before those with a longer running time. Experimental results verified that the running time was actually improved by 11%.

• International Journal of Railway
• /
• 제9권1호
• /
• pp.1-9
• /
• 2016

In order to achieve a comprehensive utilization of railway networks, it is necessary to accurately assess the timetable indicators that effect the train operation. This paper describes the parameter calibration for two timetable indicators: scheduled running time and scheduled dwell time. For the scheduled running time, an existing model is employed and the single timetable parameter (percentage of minimum running time) in that model is optimized. For the scheduled dwell time, two intrinsic characteristics: the significance of stations and the average headway at each station are proposed firstly to form a new model, and the corresponding timetable parameters (the weight of the significance and the weight of the average headway) are calibrated subsequently. The Floyd Algorithm is used to obtain the connectivity among stations, which represents the significance of the stations. A case study is conducted in a light rail transportation system with 17 underground stations. The results of this research show that the optimal value of the scheduled running time parameter can be automatically determined, and the proposed model for the scheduled dwell time works well with a high coefficient of determination and low relative root mean square error through the leave-one-out validation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.780-783
• /
• 2004

Recently Intake noise has been extensively studied to reduce the engine noise. In order to diminish intake noise several resonators were added to the intake system. However this can cause a reduction of engine output power and an increase of fuel consumption. In this study, active noise control simulation of the Filtered-x LMS algorithm is applied real instrumentation intake noise data under rapid acceleration because intake noise is more excessively increased under the such a harsh condition. But the FXLMS algorithm has poor control performance when the system is disturbed. Thus modified FXLMS algorithm using L-point running average filter is developed to improve the control performance under the rapid acceleration and disturbance. The noise reduction quantity of modified Filtered-x LMS algorithm is more than original one in two cases. In the case of control for real instrumentation intake noise data, maximum residual noise of modified FXLMS algorithm is 2.5 times less than applied the FXLMS and also in the case of disturbed, the modified FXLMS algorithm shows excellent control performance but FXLMS algorithm cat not control.

• The Journal of the Acoustical Society of Korea
• /
• 제25권3E호
• /
• pp.123-130
• /
• 2006

The adaptive echo canceller (AEC) has become an important component in speech communication systems, including mobile station. In these applications, the acoustic echo path has a long impulse response. We propose a running-average least mean square (RALMS) algorithm with a detection method for acoustic echo cancellation. Using colored input models, the result clearly shows that the RALMS detection algorithm has a convergence performance superior to the least mean square (LMS) detection algorithm alone. The computational complexity of the new RALMS algorithm is only slightly greater than that of the standard LMS detection algorithm but confers a major improvement in stability.

• 한국산림과학회지
• /
• 제85권3호
• /
• pp.513-523
• /
• 1996

본 연구는 임도의 노선 선형이 차량의 주행속도에 마치는 영향을 규명하고, 임도의 구조를 개선할 수 있는 개선책을 제시하고자 하였다. 이러한 목적을 달성하기 위하여 본 연구는 기존의 임도 설계서 및 설계도면을 검토사여 연구 목적에 부합하는 임도를 선정하고, 연구대상 임도에 대해 종단물매, 노폭, 곡선반지름, 곡선길이, 곡선부의 편구배 등 노선선형 인자와 노면의 상태 등을 측정하였다. 선택된 실험차량을 이용하여 주행실험을 한 결과, 차량의 주행속도에 크게 영향을 미치는 인자는 노면의 상태, 곡선반지름, 학성물매, 곡선길이, 종단물매인 것으로 나타났다. 또한, 실험차량의 주행속도는 임도시설규정에서 제시된 설계속도에 비해 낮은 값을 나타내었으며, 적재시(적차)의 주행 속도는 비적재시(공차)에 비해 70-85%의 값을 보였다. 그리고 노면의 상태에 따라 곡선반지름과 종단물매의 증가에 따른 주행속도의 변화를 식으로 나타낼 수 있었다. 이러한 연구의 결과는 가존의 임도 뿐만 아니라 향후 개설될 임도의 질을 판단하고, 임도에서의 주행속도를 개선시킬 수 있는 임도 구조의 선택을 가능하게 할 것으로 생각된다.

• 한국운동역학회지
• /
• 제30권3호
• /
• pp.197-204
• /
• 2020

Objective: The purpose of this study was to investigate the effect of increased running speed on the magnitude of impact shock attenuation in high frequency (9~20 Hz) at support phase on the treadmill running. Method: Twenty-four healthy male heel-toe runners participated in this study. Average age, height, mass, and preference running speed were 23.43±3.78 years, 176.44±3.38 cm, 71.05±9.04 kg, and 3.0±0.5 m/s, respectively. Three triaxial accelerometer (Noraxon, USA) were mounted to the tuberosity of tibia, PSIS (postero-superior iliac spine), and forehead to collect acceleration signals, respectively. Accelerations were collected for 20 strides at 1,000 Hz during treadmill (Bertec, USA) running at speed of 2.5, 3.0, 3.5, and 4.0 m/s. Power Spectrum Density (PSD) of three acceleration signals was calculated to use in transfer function describing the gain and attenuation of impact shock between the tibia and PSIS, and forehead. One-way ANOVA were performed to compare magnitude of shock attenuation between and within running speeds. The alpha level for all statistical tests was .05. Results: No significant differences resulted for magnitude of the vertical and resultant impact shock attenuation between the tibia and PSIS, and forehead between running speeds. However, significant differences within running speed were found in magnitude of the vertical shock attenuation between tibia and PSIS, tibia and forehead at speed of 2.5, 3.0 m/s, respectively. Conclusion: In conclusion, it might be conjectured that muscles covering the knee and ankle joints and shoe's heel pad need to strengthen to keep the lower extremities from injuries by impact shock at relatively fast running speed that faster than preferred running speed.

• 국제물리치료학회지
• /
• 제8권1호
• /
• pp.1084-1089
• /
• 2017

The purpose of this study was to compare and analyze the difference of the ankle joint movements during landing. Seven adult males voluntarily participated in the study and the average foot size of the subjects was 269.8 mm. Image analysis equipment and the ground reaction force plate (landing type) was used to measure th kinetic variables. As a result of this study, it was confirmed that the vertical ground reaction force peak point appeared once in the barefoot with forefoot, while two peak points appeared in the barefoot and functional shoe foot with rear foot landing. About ankle angle, fore foot landing ankle angle, the average with bare foot landing was $-10.302^{\circ}$ and the average with functional shoe foot landing was $-2.919^{\circ}$. Also about rear foot landing, ankle angle was $11.648^{\circ}$ with bare foot landing and $15.994^{\circ}$ with functional shoe landing. The fore foot landing, ankle joint force analysis produced 1423.966N with barefoot and 1493.264N with functional shoes. But, the rear foot landing, ankle joint force analysis produced 1680.154N with barefoot and 1657.286N with functional shoes. This study suggest that the angle of ankle depends on the landing type and bare foot running/functionalized shod running, and ankle joint forces also depends on landing type.