• 제목/요약/키워드: runner plant

검색결과 66건 처리시간 0.02초

Growth of Runner Plants Grown in a Plant Factory as Affected by Light Intensity and Container Volume

  • Park, Seon Woo;Kwack, Yurina;Chun, Changhoo
    • 원예과학기술지
    • /
    • 제35권4호
    • /
    • pp.439-445
    • /
    • 2017
  • Transplant production in a plant factory with artificial lighting provides several benefits; (1) rapid and uniform transplant production, (2) high production rate per unit area, and (3) production of disease free transplants production. To improve the growth of runner plants when strawberry transplants are produced in a plant factory, we conducted two experiments to investigate (1) the effect of different light intensity for stock and runner plants on the growth of runner plants, and (2) the effect of different container volume for runner plants on their growth. When the stock and runner plants were grown under nine different light conditions composed of three different light intensities (100, 200, and $400{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPF) for each stock and runner plants, increasing the light intensity for stock plants promoted the growth of runner plants, however, the growth of runner plants was not enhanced by increasing the light intensity for runner plants under same light intensity condition for stock plants. We also cultivated runner plants using plug trays with four different container volumes (21, 34, 73, and 150 mL) for 20 days after placing the stock plants, and found that using plug trays with lager container volume did not enhance the growth of runner plants. These results indicate that providing optimal condition for stock plants, rather than the runner plants, is more important for increasing the growth of the runner plants and that the efficiency of strawberry transplant production in a plant factory can be improved by decreasing light intensity or container volume for runner plants.

땅콩의 초형을 주로한 품종군분류 및 그들의 생태적 변이에 관한 연구 (Studies on Grouping of the Varieties by Plant Type and their Ecological Variation for Peanut(Arachis hypogaea L.))

  • 이은섭
    • 한국작물학회지
    • /
    • 제18권
    • /
    • pp.124-155
    • /
    • 1975
  • 땅콩 품종육성의 기초자료와 환경에 대한 변이를 추구하고저 1968년 국내외에서 수집한 489품종을 작물시험장 시험포장에 파종하여 품종군분류를 시도하였으며 1969년에 이들 주요품종군별로 파종기를 4월 16일부터 7월 7일까지 5회 20일간격으로 5회 파종하여 품종군별 파종기에 따른 주요형질의 변이를 조사한바 그 결과를 요약하면 다음과 같다. 1. 땅콩의 분류는 초형을 주로 하고, 종실의 대소, 개화의 조만, 맥당종실수등을 기준으로 Spanish, Virginia Erect, Virginia Runner, Southeast Runner, Valencia, Semirunnerdm 6개군으로 구분하였다. 2. 품종군별 특징은 다음과 같다. (1) Spanish; 직립, 대립, 만생. (2) Virginia Erect; 직립, 대립, 만생. (3) Virginia Runner; 포복, 대립, 만생. (4) Southeast Runner; 포복, 소립, 조생. (5) Valencia; 직립, 소립, 조생, 맥당 3∼4위. (6) Semirunner; 반립, 대립, 만생. 3. 품종군별 개화일수는 파종기가 지연됨에 따라 전반적으로 단축되었으며 단축정도는 만생군에서 컸다. 4. 분기수는 각파종군 모두 만파일수록 감소하는 경향이나 Spanish와 Virginia Runner는 제1파종기에서 오히려 제2파종기보다 적었으며 각 파종기 모두 Spanish가 가장 적고 Virginia Erect가 가장 많았다. 5. 맥실비율은 각품종군 모두 5월 이후의 파종에서 현저히 감소되었으며 어느 파종기에서나 Spanish와 Southeast Runner가 높았다. 6. 맥당종실수는 어느 품종군에서나 파종기가 늦어짐에 따라 현저히 감소되었으며 소립종군보다는 대립종군에서 맥당종실수가 적었다. 7. 개체당맥실중은 각파종기 모두 제2파종기가 가장 무거웠고 제1파종기도 이보다 가벼웠으며 제2파종기이후의 파종에서는 급격히 감소하였고 각파종기 모두 Southeast Runner가 가장 무겁고 Virginia Runner가 가장 가벼웠다. 8. 개체당종실수는 개체당맥실중과 같은 경향이나 각파종기 모두 대립중에서 적고 소립종에서 많았다. 9. 100립중도 제2파종기이후의 감소는 현저하였으며 제1파종기에서도 제2파종기보다 떨어지는 경향이었다. 10. 10a당 수량에 있어서는 각품종군별 파종기에 따른 변이가 현저하였으며 제2파종기인 5월 7일에서 가장 높고, 기타 파종기에서는 감소정도가 현저하였다. 11. 주경장 분지장에 있어서 Spanish는 제1파종기에서 제2파종기보다 작았으며 기타군은 양파종기간에 비슷하였으나 그 이후 파종기에서는 급격히 감소하였다. 12. 수량과 주요형질의 상관에서 개체당맥수, 100립중, 개체당종실수등이 Virginia Runner이외의 품종군에서 수량과 높은 정의 상관이 있었으며 기타형질의 상관은거의 인정할 수 없었으며 파종기에 따른 상관의 차이가 인정되었다.13. 경로계수 분석에 의한 수량에 대한 직접효과는 모든 품종군별 파종기에서 개체당종실수, 개체당맥중 및 100립중에서 컸으며 기타는 미미하였다. 14. 품종군별 유전력은 전체적으로 개체당맥수, 맥실비율, 100립중, 개체당종실수에서 높았으며 기타가 낮았다.

  • PDF

Selection of Optimal Number of Francis Runner Blades for a Sediment Laden Micro Hydropower Plant in Nepal

  • Baidar, Binaya;Chitrakar, Sailesh;Koirala, Ravi;Neopane, Hari Prasad
    • International Journal of Fluid Machinery and Systems
    • /
    • 제8권4호
    • /
    • pp.294-303
    • /
    • 2015
  • The present study is conducted to identify a better design and optimal number of Francis runner blades for sediment laden high head micro hydropower site, Tara Khola in the Baglung district of Nepal. The runner is designed with in-house code and Computational Fluid Dynamics (CFD) analysis is performed to evaluate the performance with three configurations; 11, 13 and 17 numbers of runner blades. The three sets of runners were also investigated for the sediment erosion tendency. The runner with 13 blades shows better performance at design as well as in variable discharge conditions. 96.2% efficiency is obtained from the runner with 13 blades at the design point, and the runners with 17 and 11 blades have 88.25% and 76.63% efficiencies respectively. Further, the runner with 13 blades has better manufacturability than the runner with 17 blades as it has long and highly curved blade with small gaps between the blades, but it comes with 65% more erosion tendency than in the runner with 17 blades.

고낙차 수력 펌프/터빈 런너에 대한 모우드 실험 (Modal Testing on a High Head Pump/Turbine Runner)

  • 류석주;하현천;김호종
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
    • /
    • pp.278-282
    • /
    • 1997
  • This paper describes results of modal testing for a high head pump-turbine runner of the Muju pumped storage power plant. The head of the pump-turbine is 601 m and the outside diameter of its runner is 4,410 mm. The modal testing was done for two conditions : 1) the runner in air ; 2) the runner in water. For both conditions, obtained are natural frequencies, corresponding mode shapes and damping ratios. From the testing, it is found that the natural frequencies of the pump-turbine runner in water is reduced approximately 40 % due to additional mass effect of the water.

  • PDF

딸기 '매향'과 '설향'의 육묘기 런너의 절단 시기가 생육 및 수량에 미치는 영향 (Effect of Runner Cutting Time on Growth and Yield during Nursery of Strawberry (cv. Maehyang and Seolhyang))

  • 김대영;김수;강윤임;윤형권;윤무경;김태일;최종명
    • 생물환경조절학회지
    • /
    • 제21권4호
    • /
    • pp.385-391
    • /
    • 2012
  • 국내에서 육성된 딸기 품종인 '매향' 및 '설향'을 대상으로 비가림 포트 육묘 시 런너의 절단 시기에 따른 자묘의 생육과 정식 후 수량을 2작기(2009년 및 2010년)에 걸쳐 검토하였다. 자묘는 정식일(2009년 9월 11일 및 2010년 9월 10일)을 기준으로 30일, 20일, 10일 및 5일 전에 모주로부터 런너를 절단하였다. 런너의 절단 시기가 늦을수록 모주에서 양수분이 육묘 후기까지 자묘로 공급되어 지상부 생체중, 관부직경 및 엽록소 함량은 증가하는 경향을 보였다. 반면에 근중 등 지하부 생육은 런너의 절단 시기가 빨라서 모주로부터 자묘의 독립 기간이 길수록 증가하였다. 모주에서 런너를 절단한 경우의 관수 요구량이 런너를 절단하지 않은 처리구에 비하여 29.7% 증가하였다. 또한, 런너를 절단하였을 경우에 런너를 통하여 탄저병이 침입한 경우가 런너를 절단하지 않은 처리구에 비하여 37.6% 높게 나타났다. 정식 후 정화방의 출뢰 및 개화 개시기는 런너 절단 시기가 늦을 경우 2~3일까지 지연되었으나 런너 절단 시기에 따른 조기 수량의 차이가 없으므로 런너 절단 시기를 정식일의 5~10일 전인 8월 하순 이후로 늦추어 실시하는 것이 탄저병 발생 경감 측면에서는 유리한 것으로 생각된다.

사계성 딸기의 자묘생산시기와 묘령의 차이가 작형별 수량에 미치는 영향 (Effect of Different Production Period of Nursery Plant and Age on the Yield in Different Cropping Type of Everbearing Strawberry)

  • 라상욱;우인식;김운섭;서관석;윤화모;허일범
    • 자연과학논문집
    • /
    • 제10권1호
    • /
    • pp.73-80
    • /
    • 1998
  • 사계성 딸기의 년중자묘생산을 위한 자묘생산시기별 자묘증식효과와 묘령에 따른 작형별 수량성을 검토한 결과 노지월동모주에 대한 봄 자묘증식 방법은 보온+전조+GA처리+화방제거시 주당 22.3본으로서 대조(보온) 보다 13.1배의 우수한 효과를 보였고 하절기 GA처리에 의한 가을 자묘증식효과는 20 ppm 처리시 주당 12.0본으로서 대조(무처리) 보다 1.7배의 효과를 보였다. 또한 춘식재배 및 하식재배시 당년생 봄자묘의 묘령별 포장생육은 40일묘 보다 60일묘가 생육초기의 화방수가 다소 많아 유리하였으나 당년생 자묘로서는 수량성이 너무 저조하여 특히 사계성 딸기 춘식 재배시에 적합한 자묘는 전년 가을생산된 월동자묘를 이용하여야만 할 것으로 사료된다.

  • PDF

폐쇄형 육묘 시스템에서 딸기의 러너플랜트 생산 증진에 적합한 광합성유효광량자속 (Improvement of Runner Plant Production by Increasing Photosynthetic Photon Flux during Strawberry Transplant Propagation in a Closed Transplant Production System)

  • 김성겸;정미선;박선우;김무정;나해영;전창후
    • 원예과학기술지
    • /
    • 제28권4호
    • /
    • pp.535-539
    • /
    • 2010
  • 국내 육성 품종인 '매향' 딸기의 육묘 기간 중 광합성유효광량자속의 환경 조절을 통하여 러너 및 러너플랜트의 발생과 생산 효율을 증대시키고자 하였다. 딸기 육묘에 이용된 증식체의 엽수와 관부 직경은 각각 $3.1{\pm}0.4$$7.0{\pm}1.1mm$였다. 광합성유효광량자속을 각각 140, 210 및 $280{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$로 설정한 9기의 인공광 이용형 육묘 모듈에서 35일 동안 육묘하였다. 러너플랜트 생산 효율은 증식체당 일일 0.27주로 처리구 중 유의하게 가장 높았으며 관행의 딸기 육묘 방식의 러너플랜트 생산 효율과 비교하여도 크게 증진되었음을 확인하였다. 폐쇄형 육묘 시스템을 활용하여 육묘 기간 중의 PPF를 $280{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$로 조절하면 국내 육성 품종인 '매향'의 러너 발생 및 러너플랜트 생산을 증진시킬 수 있음이 확인되었다. 따라서 최근 국내에서 육성된 신품종 딸기의 급속 보급을 위한 증식체계 구축에 본 연구 기술이 활용되면 육성된 품종의 조급 보급이 가능할 것으로 판단된다.

Zoysia matrella의 생장에 미치는 잔디용 제초제 Simazine, Pendimethalin, Propyzamide, Asulam의 영향 (Influence of Selected Turfgrass Herbicides, Simazine, Pendimethalin, Propyzamide and Asulam on the Growth of Zoysia matrella)

  • 김석정
    • 아시안잔디학회지
    • /
    • 제7권2_3호
    • /
    • pp.81-94
    • /
    • 1993
  • This study was conducted to investigate the influence of herbicides, simazine, pendimethalin, propyzamide and asulam on the growth of Zoysia matrella when they are treated at different growth stages of the plant. The reaction of Zoysia matrella to herbicides differed depending on kinds of herbicides, their concentcations, and time of treatment. Simazine at the higher concentration of 600g /l0a exhibited inhibitory effect on leaf dry matter and growth of runner when treated on April 5, 1991. The highest inhibition of leaf and runner was observed in the plot applied on May 23, 1990. The sprouting and growth of Zoysia matrella was not affected by all the concentrations of the herbicides applied on October 23,1991. Pendimethalin did not influence the growth of Zoysia matrella at he treatment of April 5. However, at the treatment of May 23, the number and growth of runner was inhibited although the plant height and leaf dry matter was not affected. When pendimethalin was treated on October 23, the growth of runner was very slightly reduced in the next year. In case of propyzamide, there was no inhibitory effect on the growth of Zoysia matrella regardless of treatment of times, methods, and dosages. Greater inhibition in the growth of Zoysia matrella was observed at higher dosage(1,ll0g /l0a)-treated plot on April 5 and all the concentrations treated on May 23. But, no inhibition was observed on the October 23 treatment.

  • PDF

고낙차 수력 펌프/터빈 런너에 대한 진동 모드해석 및 실험 (Modal Analysis and Testing of a High Head Pump/Turbine Runner)

  • 류석주;하현천
    • 소음진동
    • /
    • 제8권6호
    • /
    • pp.1062-1068
    • /
    • 1998
  • This paper describes the vibration characteristics of a high head pump-turbine runner. with nine blades and an outer diameter of 4.410 mm. of the pumped storage power plant. Mode shapes and natural frequencies were obtained by means of both the finite element analysis and modal testing. both in air and in water. The natural frequencies in air were calculated using the finite element method by ANSYS software. In order to confirm calculation results. the natural frequencies and mode shapes of the runner were measured using a hydraulic exciter both in air and in water. Natural frequencies of the pump-turbine runner were found at 174. 310 Hz in air, and at 107. 184 Hz in water. The first mode shape is flat plate mode with two nodal diameter and the second one is also flat plate mode with three nodal diameter. It can be shown that the natural frequencies of the pump-turbine runner in water is reduced approximately 40 % due to additional mass effect. Natural frequencies in air predicted by ANSYS software are in good agreement with test results.

  • PDF