• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.189.2-189.2
• /
• 2010

The purpose of this study is fatigue damage assessment for large sized casting parts (hub and mainframe) of the 3MW offshore wind turbine by computer simulation. Hub and mainframe durability assessment is necessary because wind turbine have to guarantee for 20 years. Fatigue life evaluation must be considered all of fatigue load conditions as the components are wind load transmission path. Palmgren-Miner linear damage accumulation hypothesis is applied for fatigue life estimation with stress-life approach. S-N curve for the spheroid graphite cast iron EN-GJS-400-18-LT is derived according to durability guidelines. Reduction factors were applied for survival probability, surface roughness, material quality and partial safety factor according to Germanischer Lloyd rules. To calculate fatigue damage, stress tensors, extracted from the unity load calculation from ANSYS is multiplied with time track of fatigue loads extracted from GH bladed. Damage accumulation is performed with all of fatigue load conditions at each finite element nodes. In this study maximum nodal damage value is under 1.0. casted parts are safe. This research was financially supported by the Ministry of Knowledge Economy(MKE), Korea Institute for Advancement of Technology(KIAT) and Honam Leading Industry Office through the Leading Industry Development for Economic Region.

• Journal of Korea Association of Health Promotion
• /
• v.4 no.1
• /
• pp.115-124
• /
• 2006

Basically, diagnosis is a comprehensive judgement of the biochemical data which were collected from the patient directly. Therefore, no matter what kinds of well-managed data control are there, if data sample itself is not perfectly appropriate for any reason. we can not rule out high possibility of misunderstanding or wrong diagnosis. Among many possible reasons inadequate sample were collected maybe three situation and circumstances could be assumed as follows. 1. Client did not know what they are supposed to do for sampling 2. Technicians are to qualified or less-experienced on the job 3. Wrong managing or careless treat of the biochemical data sample If it is true, we could manage these problems to be solved through the information sharing and education. In order to verify this hypothesis, actually 5,800 cases were studied from January to August this year. Owing to the thorough education the rate of unappropriated samples reduced to 0.4% from 1.2%. This outcome strongly support the hypothesis of the mutual relation between the proper sample and well-designed education in advance. The importance of information sharing on right process of sample collection should be emphasized.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.276-279
• /
• 2005

A review of how the functions of two or more independent variables can be approximated by using fuzzy systems is provided in this paper. We start with an exact represention of a linear interpolation function of two independent variables by using a fuzzy system. Next, we describe how this function can be approximated by another fuzzy system with a lesser number or with a desired number of output fuzzy sets. Thus, a reduction of the storage needed is achieved by storing the fuzzy rules or equivalently the output fuzzy set numbers instead of storing the whole discrete function values. A description on how the cubic spl me interpolation function can be represented exactly by using the fuzzy system method is provided, along with a few examples where fuzzy rule tables with a size of 7$\times$7 provide a representation of the functions with relative errors of the order of $10^{2}$ or less.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.276-279
• /
• 2005

This paper presents a novel cylindrical capacitive sensor (CCS) for both radial and axial motion measurements. Although the new CCS has almost the same geometric configuration as the conventional CCS, the unused axial area of the CCS is utilized to measure the axial motion of the rotor, which can affords more compact design and reduction of the system complexity. First, a theoretical model of the proposed CCS is derived. Based on the derived theoretical model, compensation methods to decouple the radial and axial motion measurements are proposed. In addition, error analysis is performed and a design rule is proposed to guarantee the same accuracy in measuring both radial and axial motions. Finally, a test rig and electronics for the proposed CCS are built and the effectiveness of the proposed CCS is verified with experiments and simulations.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.22
• /
• pp.107-135
• /
• 2004

The International Standard Banking Practice for the Examination of Documents under Documentary Letters of Credit (ISBP) is the product by the ICC Banking Commission, October 2002. The ISBP is a practical complement to UCP 500, ICC's universally used rules on documentary credits. It explains, in explicit detail, how the rules are to be applied on a day-to-day basis. It fills a needed gap between the general principles announced in the rules and the daily work of the documentary credit practitioner. By using the ISBP, document checkers can bring their practices in line with those followed by their colleagues worldwide. The result should be a significant reduction in the number of documents refused for discrepancies on first presentation. We are convinced that the benefits of the ISBP will not only be of high importance for users of UCP 500, but also that the practices in the ISBP will survive a UCP revision, or will even be included in the next version of the rule (so call "UCP 600"). Though the above-mentioned benefits of the ISBP, there are several troublesome topics that will probably have to wait for a new UCP revision. It will be a challenge for the drafters of a future UCP to find solutions that will further clarify these points.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.4
• /
• pp.483-489
• /
• 1993

Bovine fibroblasts were cultured in Dulbecco's Modified Eagle's Medium and then treated with control, insulin (I, $1{\mu}g/ml$), cholera toxin (CT, 0.1-100 ng/ml) or CT (0.1-100 ng/ml) + I ($1{\mu}g/ml$). Cholera toxin, an activator of adenylate cyclase, significantly decreased insulin induced DNA synthesis (p<0.05). The modulation of DNA synthesis apparently involves events occurring in early stage of cell growth, at least between the first 4 and 8 hour of CT treatment. Insulin induced collagen as well as noncollagen synthesis in cell layer, however, these syntheses were reduced by addition of cholera toxin (p<0.05) but were not completely reduced. It is not clear whether the reduction of insulin-induced cell layer collagen or noncollagen proteins by CT is involved in the inhibitory effect on insulin-induced DNA synthesis. However, we could rule out the hypothesis that insulin-induced DNA synthesis is reduced by CT-induced cellular differentiation.

• Journal of KIISE
• /
• v.43 no.6
• /
• pp.636-644
• /
• 2016

Annotated Corpus is important to understand natural language using machine learning method. In this paper, we propose a new method to automate error reduction of annotated corpora. We use the Ripple-Down Rules(RDR) for reducing errors and Kernel to extend RDR for NLP. We applied our system to the Korean Wikipedia and blog corpus errors to find the annotated corpora error type. Experimental results with various views from the Korean Wikipedia and blog are reported to evaluate the effectiveness and efficiency of our proposed approach. The proposed approach can be used to reduce errors of large corpora.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.42
• /
• pp.189-210
• /
• 2009

The United Nations General Assembly adopted the United Nations Convention on Contracts for the International Carriage of Goods Wholly or Partly by Sea(hereinafter referred to as "The Rotterdam Rules") on 11 December 2008. Rotterdam Rules aims to create a contemporary and uniform law providing for modern door-to-door container transport including an international sea leg. but not limited to port-to port carriage of goods. The structure of the liability regime in Rotterdam Rules are globally close to that of the Hague-Visby Rule even though it differs from that of the Hague-Visby Rules in some significant aspects. The Rotterdam Rules are very long. Therefore the Rotterdam Rules will be difficult to understand for even the skilled ship operator or owner or charterer or shipper or consignee or receiver because they are so complicated. This paper only seeks to highlight the salient features of the liability and limitation of liability regime under the Rotterdam Rules. It is expected that the harmonization and modernization of the international legal regime. coupled with the bold attempt to balance the carrier and cargo interests should lead to an overall reduction in transaction costs. increased predictability and greater commercial confidence for international business transactions.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.2
• /
• pp.46-53
• /
• 1999

In this paper, a packer is proposed for removing the bottle-neck effect and processing easy signal using a new algorithm with the operation frequency of 54MHz in processing HDTV video signal. To verify the performance of the proposed packer, DCT coefficient encoding block with ROM table using a combinational logic is designed and its output data are used as the input data of the packer.The proposed circuits, in this paper, are designed by using VHDL code and its modeling and simulation are performed with SYNOPSYS tool in $0.65{\mu}m$ design rule.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.316-321
• /
• 2000

Die Casting is one of the forming methods to manufacture large number of products with short period time and clean surface by high forming pressure and temperature of cast alloy. Die design is composed of selection of cast alloy, design of die casting product, runner and gate design etc. In reality, however, die design of die casting has been performed by trial and error method, which cause economic and time loss. This paper describes a research work of developing computer-aided design of die casting product and die design. Approach to the CAD system has been written in AutoLISP on the AutoCAD with personal computer. In this study, die design system for gate of die casting process has been developed to present algorithm for automation of die design, especially runner-gate system. As forming process and die design system using 3-D geometry handling are integrated with technology of process planning, die design is possible to set. In addition, specific rules and equations for the runner-gate system have been presented to avoid too many trails and errors with expensive equipment. It is possible for engineers to make automatic and efficient die design of die casting and it will result in reduction of expense and time to be required. An example is applied to cap-shaped casting using proposed algorithm.