• 자원리싸이클링
• /
• 제24권2호
• /
• pp.55-61
• /
• 2015

본 연구는 폐타이어 재활용을 위하여 수행된 전처리 공정이 재생 고무분말의 기계적 물성에 미치는 영향을 조사하는 것을 목적으로 하였다. 이를 위하여 분쇄 및 탈황공정을 통하여 생산된 폐타이어 고무분말을 재가황한 후 인장시험, 충격시험 및 파단면 관찰을 수행하였다. 분쇄 공정을 거쳐서 생산된 고무분말은 입자크기가 작아질수록 그 표면적이 증가되며 인장강도와 연신율이 모두 증가되었다. 반면에 탈황공정을 거친 고무분말은 내부에 존재하는 황과의 가교결합이 줄어들어서 이후의 가황처리 후에도 인장강도와 연신율이 모두 증가되었다. 따라서 폐타이어 재활용을 위한 전처리 공정은 재활용 분말을 일정크기로 분쇄한 후 탈황공정까지를 수행한 고무분말을 제조하는 것이 단순 분쇄공정만을 거친 재활용 고무분말에 비하여 가황 시에 연신율을 보다 효율적으로 증가시킬 수 있음을 확인하였다.

• 한국자기학회지
• /
• 제4권3호
• /
• pp.208-213
• /
• 1994

복합 Ferrite 전파흡수체의 성능은 두께가 얇으며 대역폭이 넓을수록 우수하다. 본 연구에서는 복합 Ferrite 전파흡수체의 정합두께를 감소시키기 위하여 Ferrite-Iron-Rubber 복합체를 제조하고 그 특성을 고찰하였다. ${\alpha}-Fe$ 분말의 첨가에 의하여 복합체의 유전율 실수항과 투자율 실수항이 증가하여 정합주파수와 정합두께의 고하기 항인 $f_{m}.d_{m}$ 항이 감소하였고, 3~17 GHz의 주 파수 범위에서 Ferrite-Rubber 복합체에 비하여 정합두께가 0.5 mm~2 mm 정도 감소함을 확인할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.220-224
• /
• 2001

Waste tires are a significant problem with the increasing in number of automobiles. Therefore, many researches have been studied on this field. Recycling is the one of the popular method aspect to environmental and economical in the treatment methods of the waste tire, which loads that the reuse of scrap tire rubber has been a challenge in the past. However, it is not easy method to melt down and mold into new products because the in rubber is a cross-linked polymer. Most difficulty in recycling is the recycled product is not economic. Therefore, the goal of this study is to develop the high valuable products for reused waste tires. In this paper, we try to make an economic recycled technology using scrapped waste tires. This technology may applied for manufacturing the end products such as a rubber block and a ballast mat for high-speed train.

• 한국항해학회지
• /
• 제23권1호
• /
• pp.15-22
• /
• 1999

In this paper, ferrite-rubber composite has been studied in order to apply to RF-A-PF in a super wideband electromagnetic absorber in RF-A-PF type, which can be used for a general purpose anechoic chamber. $Ni_x - Mn_0.1 - Zn_{(1-x-0.1)}ㆍFe_2O_4$ ferrite powder has been fabricated, then, using this, 〔$Ni_x - Mn_0.1 - Zn_{(1-x-0.1)}ㆍFe_2O_4$〕-Rubber composite for RF-layer in the RF-A-PF type absorber has been fabricated and it's characteristics have been analyzed. As a result, it has been clearly shown that the 〔$Ni_x - Mn_0.1 - Zn_{(1-x-0.1)}ㆍFe_2O_4$〕-Rubber composite has excellent electromagnetic wave absorbing properties.

• 한국정보통신학회논문지
• /
• 제3권1호
• /
• pp.35-42
• /
• 1999

This paper describes the characteristics of the complex isotropic ferrite-rubber composite for a super wideband electromagnetic absorber in RP-A-PF type, which can be used for an anechoic chamber, wall material to prevent TV ghost, etc. The $Ni_x-A_{0.1}-ZN_{(1-x0.1)}$. $Fe{_2}O_4$ ferrite powder has been fabricated. Using this, then, [$Ni_x-A_{0.1}-ZN_{(1-x0.1)}$. $Fe{_2}O_4$]-Rubber composite for RF-layer in the RF-A-PF type absorber has been fabricated and it's characteristics has been analyzed. As a result, it has been shown that the [$Ni_x-A_{0.1}-ZN_{(1-x0.1)}$. $Fe{_2}O_4$].Rubber composite has excellent electromagnetic wave absorbing properties.

• Computers and Concrete
• /
• 제30권4호
• /
• pp.257-267
• /
• 2022

Two different types of rubber aggregates (40 mesh rubber powder and 1-4 mm rubber particles respectively) were devised to substitute fine aggregates at 10%, 15%, 20% and 30% by volume in self-compacting concrete to investigate their basic mechanical properties. The results show that with the increase of rubber content, the reduction of compressive strength, splitting tensile strength and static modulus of elasticity gradually increase, and energy dissipation performance gradually increase. The rubber addition significantly reduces brittleness and decelerates damaged process. Whilst, the effect of rubber particles is greater when they are finer. Considering the mechanical properties, the optimal rubber content is 10%. It is recommended that the rubber volume content in rubberized concrete (RC) should not be higher than 20%. In addition, a constitutive model under uniaxial compression was proposed basing on the strain equivalent principle of Lemaitre and the damage theory, which was in good agreement with the test curves.

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.128-138
• /
• 2003

폐타이어의 증가로 인하여 환경문제가 날로 심각해지고 있다. 그러므로 효율적인 재활용을 통하여 이러한 문제를 해결하는데 많은 연구가 진행되고 있다. 본 연구에서는 폐타이어를 상온분쇄기를 제작하여 미세 분말화와 초음파로 처리를 통하여 기본물성을 높이는데 목적을 두었다. 폐고무 분말의 통계학적 분석에 의해서 미세화에 따른 물성의 변화와 물리적 성질을 조사하였고, 기계적 및 가교도 등의 물성을 조사하였다. 또한 광학현미경을 사용하여 표면을 확인함으로서 제품특성을 연구하였다.

• 한국항해학회지
• /
• 제22권4호
• /
• pp.69-75
• /
• 1998

The super wideband electromagnetic wave absorber in RF-A-PF type has been proposed, which can be used for an anechoic chamber, wall material to prevent TV ghost, etc, In this paper, $Ni_x-Mg_{0.1}-Zn_(1-x-0.1){\cdot}Fe_2O_4$ Ferrite Powder has been fabricated. Using this, then, [$Ni_x-Mg_{0.1}-Zn_(1-x-0.1){\cdot}Fe_2O_4$-Rubber composite for RF-layer in the RF-A-PF type absorber has been fabricated and its characteristics has been analyzed. As a result, it has been shown that the $Ni_x-Mg_{0.1}-Zn_(1-x-0.1){\cdot}Fe_2O_4$-Rubber composit with the quantity $_x$ of $Ni_x$ between 0.5 and 0.6 is suitable for the RF-layer in the case of which the grain size is sub-micrometer order.

• 분석과학
• /
• 제22권5호
• /
• pp.355-359
• /
• 2009

An enzyme electrode bound by rubber solution was newly constructed and the test of its practicability were carried out. The binder of carbon powder was styrene-butadiene rubber dissolved in toluene and enzyme source was ground tissue of cabbage root. Volatilization of the solvent made the electrode material possess a mechanical robustness and a fast signal appearance. The electrode showed electrochemically irreversible characteristics and a powerful catalytic power (detection limit=$5.0{\times}10^{-5}M$, S/N=2). The double reciprocal plot of signal current and substrate concentration was ideally linear and the symmetry factor and exchange current density of the electrode used in this work were 0.35 and $4.93{\times}10^{-5}Acm^{-2}$ respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.99-106
• /
• 1991

Result of an experimental study on the manufacture, the mechanical properties and waterightness of pitch-based carbon fiber reinforced fly ash.cement composites are presented in this paper. The carbon fiber reinforced fly ash.cement composites using early strength cement, silica powder and a small amount of stylene butadiene rubber latex are prepared with carbon fiber, foaming agents and mixing conditions. As a result, the mechanical and plysical properties such as compresive, tensile and flectural strengths, watertightness and cement composites are improved by using a small amount of stylene butadiene rubber latex.