• 한국시뮬레이션학회논문지
• /
• 제13권4호
• /
• pp.55-69
• /
• 2004

In MANET(Mobile Ad-hoc Network), unlike in wired networks, a path configuration should be in advance of data transmission along a routing path. Frequent movement of mobile nodes, however, makes it difficult to maintain the configured path and requires re-configuration of the path very often. It may also leads to serious problems such as deterioration of QoS in mobile ad-hoc networks. In this paper, we proposed a Reactive Routing Keyword (RRK) routing procedure to solve those problems. Firstly, we noticed it is possible in RRK routing to assign multiple routing paths to the destination node. We applied this feature into active networks and SNMP information based routing by storing unique keywords in cache of mobile nodes corresponding to present and candidate routings in a path configuration procedure. It was shown that the deterioration of QoS which may observed in Dynamic Source Routing(DSR) protocol was greatly mitigated by using the proposed routing technique.

• 대한산업공학회지
• /
• 제25권1호
• /
• pp.35-46
• /
• 1999

The introduction of general purpose machining centers and the information system based on computer network has added a new control problem to the classical job shop control problems: a routing problem. A routing problem is to determine the machine on which a part will be processed. The modern manufacturing systems are given much system status information including the arrival time of the future parts via the computer network for automation. This paper presents and tests the performance of a routing procedure, LARP(Look-Ahead Routing Procedure) which uses look-ahead information on the future arrival of parts in the system. The manufacturing system considered in this paper has multi-stations which consists of general purpose machines and processes parts of different types. The application of LARP under many operating conditions shows that the reduction of part flow time and tardiness from the cases without using this information is up to 8% for flow time and 21% for tardiness. The procedure introduced here can be used for many highly automated systems such as an FMS and a semi-conductor fabrication system for routing where the arrivals of parts in the near future are known.

• 한국경영과학회지
• /
• 제22권2호
• /
• pp.79-97
• /
• 1997

Many dispatching rules have been developed for the on-line control of product flow in a job shop. The introduction of a flexible manufacturing system (FMS) has added a new requirement to classical job shop control problem : the selection of machines by parts of different types. An FMS can keep a great deal of information on the status of the system, such as information on what is scheduled in the near future, with great accuracy. For example, the knowledge of the time when the next part will arrive at each machine can be neneficial for the routing. This paper tests the effects of the use of this knowledge for part routing on the parts flow time (sum of the time for waiting and service) under a simple routing procedure- a look-ahead routing procedure. A test under many operating conditions shows that the reduction of part flow time from the cases without using this information is between 1% and 11%, which justifies more study on this routing procedure at real production sites when machine capacity is a critical issue. The test results of this paper are also valid for other highly automated systems such as the semi-conductor fabrication plants for routing when the arrivals of parts in the near future are known.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권9호
• /
• pp.4205-4227
• /
• 2018

Network Coding (NC) is an approach recently investigated for increasing the network throughput and thus enhancing the performance of wireless mesh networks. The benefits of NC can further be improved when routing decisions are made with the awareness of coding capabilities and opportunities. Typically, the goal of such routing is to find and exploit routes with new coding opportunities and thus further increase the network throughput. As shown in this paper, in case of proactive routing the coding awareness along with the information of the measured traffic coding success can also be efficiently used to support the congestion avoidance and enable more encoded packets, thus indirectly further increasing the network throughput. To this end, a new proactive routing procedure called Congestion-Avoidance Network Coding-Aware Routing (CANCAR) is proposed. It detects the currently most highly-loaded node and prevents it from saturation by diverting some of the least coded traffic flows to alternative routes, thus achieving even higher coding gain by the remaining well-coded traffic flows on the node. The simulation results confirm that the proposed proactive routing procedure combined with the well-known COPE NC avoids network congestion and provides higher coding gains, thus achieving significantly higher throughput and enabling higher traffic loads both in a representative regular network topology as well as in two synthetically generated random network topologies.

• 대한임베디드공학회논문지
• /
• 제1권1호
• /
• pp.8-13
• /
• 2006

In mobile ad hoc networks, most of on demand routing protocols such as DSR and AODV do not deal with traffic load during the route discovery procedure. To achieve load balancing in networks, many protocols have been proposed. However, existing load balancing schemes do not consider the remaining available buffer size of the interface queue, which still results in buffer overflows by congestion in a certain node which has the least available buffer size in the route. To solve this problem, we propose a load balancing protocol called Dynamic Congestion Aware Routing Protocol (DCAR) which monitors the remaining buffer length of all nodes in routes and excludes a certain congested node during the route discovery procedure. We also propose two buffer threshold values to select an optimal route selection metric between the traffic load and the minimum hop count. Through simulation study, we compare DCAR with other on demand routing protocols and show that the proposed protocol is more efficient when a network is heavily loaded.

• 한국시뮬레이션학회논문지
• /
• 제15권3호
• /
• pp.79-86
• /
• 2006

본 논문에서는 대표적인 on-demand 방식의 AODV 프로토콜을 개선하여 성능이 우수한 새로운 프로토콜을 제안 한다. 일반적으로 노드의 이동이나 장애에 의하여 경로복구절차가 수행될 때 대부분의 애드혹 라우팅 프로토콜은 발신지 노드에 의한 경로 탐색 절차를 다시 시작하게 된다. 이것은 제어 트래픽 오버헤드를 크게 증가시키고, 라우팅 성능은 저하 시키는 원인이 된다. 본 논문에서는 목적지 노드에서 경로 복구 절차를 시작하고 이전의 라우팅 정보를 최대로 이용함으로써 라우팅의 성능을 개선하는 알고리즘을 제안하며 시뮬레이션을 통하여 제안 프로토콜의 성능을 검증하였다. 시뮬레이션은 AODV 및 L-AODV 프로토콜과 비교 수행하였으며, 네트워크 크기, 노드 이동속도 등을 고려한 환경에서 수행하였다. 시뮬레이션의 결과는 제안 프로토콜이 기존 프로토콜에 비해 전반적으로 좋은 성능을 가짐을 보여주었다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.304-308
• /
• 1998

With the advances in concurrent engineering, schedulability has become an important design issue in machine loading and routing procedure. In this paper, four rules to improve schedulability of loading and routing are formulated as a mixed-integer programming model based on machine, routing and tool flexibilities. In this model, these rules are represented as an objective function or constraints. The impact of rules on the quality of schedules for the result of loading and routing is measured with makespan, throughput and average machine utilization.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.426-433
• /
• 2002

This paper deals with an offline routing problem, which can be used as an explicit routing procedure in MPLS(Multiprotocol Label Switching) network, for traffic engineering. This problem is formulated as an MIP(Mixed Integer Programming) with the objective function which is to minimize the sum of the maximum link utilization for load balancing (link utilization) and the routing cost. Constraints arc composed of link capacity restriction and demand requirement that has origin-destination pair, bandwidth requirement and hop restriction. The problem is proved to be NP-hard so that the Lagrangean relaxation method is applied to propose a Lagrangean heuristic. To test the effectiveness & efficiency of the proposed algorithm, computational experiments are performed with numerical instances. The experiment results show that the proposed algorithm solves the problem within a reasonable time.

• 한국통신학회논문지
• /
• 제31권1A호
• /
• pp.23-29
• /
• 2006

무선 센서네트워크(Sensor Network)에서는 많은 수의 센서 노드를 영구적으로 사용하기 보다는 일회성의 목적으로 사용하기 때문에 센서 네트워크를 구성하는 노드들의 수명을 장시간 유지시키는 것이 매우 중요하다. 이를 위해서 본 논문에서는 무선 센서네트워크의 연결 유지 시간(network lifetime)을 연장시키기 위한 EASR(Energy Aware Source Routing) 프로토콜을 제안한다. 제안하는 EASR 기법은 기존의 EAR(Energy Aware Routing)처럼 다중 경로 중에 확률에 의해 결정되는 단일 경로로만 데이터 트래픽을 전송하여 에너지 소비를 분산시키는 방법을 사용한다. 하지만 제안하는 EASR 기법에서는 기존의 SMR(Split Multipath Routing)에서 사용되는 다중 경로 선정 기법을 개선한 방법으로서 센서 노드들의 에너지 소비를 최소화 하기 위하여 다중 경로간의 overhearing 지수를 정의하고 이를 근거로 overhearing 현상에 의한 에너지 소비를 최소로 하는 다중 경로를 설정하는 기법이다. 제안하는 EASR기법이 무선 센서네트워크 환경에서 노드의 수명을 장시간 유지시키고 합리적인 데이터 전송 지연시간을 갖는다는 것을 시뮬레이션 분석을 통해 확인하였다.

• Management Science and Financial Engineering
• /
• 제12권2호
• /
• pp.63-69
• /
• 2006

To generate a multicast routing tree guaranteeing the quality of service (QoS), we consider the hop constrained Steiner tree problem and propose a new mathematical formulation for it, which contains fewer constraints than a known formulation. An efficient procedure is also proposed to solve the problem. Preliminary tests show that the procedure reduces the computing time significantly.