• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.657-660
• /
• 2000

This paper proposes a Data-Flow-Graph (DFG) restructuring to reduce calculating errors in loop folding scheduling. The prime cause of calculating error is rounding errors due to the restriction of the operation digit of functional units. This rounding error is increased more by using multipliers than adders, so reducing the number of multiplications and putting off them as much as possible reduce rounding errors. The proposed approach reduces the number of multiplications by restructuring DFG in loop folding.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.201-204
• /
• 2008

In this paper a new steganographic method is presented with minimum distortion. This paper focused on DCT rounding error and optimized that in a very easy way, resulting stego image has less distortion than other existing methods. The proposed method compared with F5 steganography algorithm, and the proposed method achieved better performance. This paper considered the DCT rounding error for lower distortion with possibly higher embedding capacity.

• ETRI Journal
• /
• 제26권6호
• /
• pp.657-660
• /
• 2004

We propose a fine phase tuner and a rounding processor for a numerically controlled oscillator (NCO), yielding a reduced phase error in generating a digital sine waveform. By using the fine phase tuner presented in this paper, when the ratio of the desired sine wave frequency to the clock frequency is expressed as a fraction, an accurate adjustment in representing the fractional value can be achieved with simple hardware. In addition, the proposed rounding processor reduces the effects of phase truncation on the output spectrum. Logic simulation results of the NCO using these techniques show that the noise spectrum and mean square error (MSE) for eight output bits of a 3.125 MHz sine waveform are reduced by 8.68 dB and 5.5 dB, respectively, compared to those of the truncation method, and 2.38 dB and 0.83 dB, respectively, compared to those of Paul's scheme.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.221-227
• /
• 2012

We propose optical proximity corrections (OPCs) for digital micromirror device (DMD)-based maskless lithography. A pattern writing scheme is analyzed and a theoretical model for obtaining the dose distribution profile and resulting structure is derived. By using simulation based on this model we were able to reduce the edge placement error (EPE) between the design width and the critical dimension (CD) of a fabricated photoresist, which enables improvement of the CD. Moreover, by experiments carried out with the parameter derived from the writing scheme, we minimized the corner-rounding effect by controlling light transmission to the corners of a feature by modulating a DMD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제29권11A
• /
• pp.1271-1277
• /
• 2004

We propose a foe phase tuner and a rounding processor for a numerically controlled oscillator (NCO), yielding a reduced phase error in generating a digital sine waveform. By using the fine Phase tuner Presented in this paper, when the ratio of the desired sine wave frequency to the clock frequency is expressed as a fraction, an accurate adjustment in representing the fractional value can be achieved with simple hardware. In addition, the proposed rounding processor reduces the effects of phase truncation on the output spectrum. Logic simulation results of the NCO for multi-carrier channel separation in cdma2000 3X multi-carrier receive system using these techniques show that the noise spectrum and mean square error (MSE) are reduced by 8.68 dB and 5.5 dB, respectively compared to those of truncation method and 2.38 dB and 0.83 dB, respectively, compared to those of Paul's scheme.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제3권1호
• /
• pp.31-41
• /
• 1999

We investigate some techniques of iterative refinement of solutions of a nonsingular system Ax = b with A partitioned into blocks using only single precision arithmetic. We prove that iterative refinement improves a blockwise measure of backward stability. Some applications of the results for the least squares problem (LS) will be also considered.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• 제13권3호
• /
• pp.1-7
• /
• 2004

Abrasive water-jet(AWJ) machining can cut various materials such as metal, glass and plastics. However, the AWJ machining has some troubles including kerf, rounding and side taper. In this study, we experimently investigated the correlation between the traverse speed of the abrasive water-jet and the dimensional error of the workpiece according to the thickness and the types of the material. The specimen was the stainless steel and the mild steel and the predetermined contour cutting was conducted. A comer radius error, an uncut width and a kerf were measured and evaluated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.585-590
• /
• 2002

Abrasive water-jet(AWJ) machining is a new cutting technology. The AWJ can cut various materials touch as metal, glass and stone. However, the AWJ machining makes troubles including kerf, rounding and side taper. In this study, we investigated the correlation between parameters of abrasive water-jet machining arid cutting characteristics. The machining parameter were the material thickness and the traverse speed. The experiment was conducted to cut the stainless steel(STS41) and the mild steel(SS41) specimens. The results of the experiment weirs presented as the relation between cutting conditions and trouble of a dimension error, a conner error, an uncut width and a kerf.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.984-987
• /
• 2002

Abrasive water-jet(AWJ) machining is a new cutting technology. The AWJ can cut various materials such as metal, glass and stone. However, the AWJ machining makes troubles including kerf, rounding and side taper. In this study, we investigated the correlation between parameters of abrasive water-jet machining and cutting characteristics. The machining parameters were the material thickness and the traverse speed. The experiment was conducted to cut the stainless steel(STS41) and the mild steel(SS41) specimens. The results of the experiment were presented as the relation between cutting conditions and troubles of a dimension error, a conner error, an uncut width and a kerf.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• 제40권4호
• /
• pp.331-341
• /
• 1991

The discrete cosine transform (DCT) is widely used in many signal processing areas, including image and speech data compression. In this paper, we investigate a fixed-point error analysis for fast DCT algorithms, namely, Lee [6], Hou [7] and Vetterli [8]. A statistical model for fixed-point error is analyzed to predict the output noise due to the fixed-point implementation. This paper deals with two's complement fixed-point data representation with truncation and rounding. For a comparison purpose, we also investigate the direct form DCT algorithm. We also propose a suitable scaling model for the fixed-point implementation to avoid an overflow occurring in the addition operation. Computer simulation results reveal that there is a close agreement between the theoretical and the experimental results. The result shows that Vetterli's algorithm is better than the other algorithms in terms of SNR.