• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.237-241
• /
• 2005

In Bluetooth version 1.0, the frequency hopping algorithm was such that there was one piconet, using a specific frequency, resolving the frequency depending on the part of the digits of the device clock and the Bluetooth address. Basic pattern was a kind of a round-robin using 79 frequencies in the ISM band. At this point, a problem occurs if there were more than two devices using the same frequency within specific range. In this paper, we proposed a software-based adaptive frequency hopping method so that more than two wireless devices can stay connected without frequency crash. Suggested method was implemented with HDL(Hardware Description Language) and automatically synthesized and laid out. Implemented adaptive frequency hopping circuit operated well in 24MHz correctly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3C
• /
• pp.219-227
• /
• 2006

In this paper, we propose a packet scheduling algorithm to maximize the required total price of the systems that is applied with a different traffic pricing criterion by the mobile service operator according to different kinds of the services. The proposed algorithm adopts a particular estimation method in scheduling using the value of pricing function, which is based on the required services and the value of SIR(signal to interference ratio) that indicate the channel condition of each user. We compare Max C/I, proportional fairness and round robin algorithm with the proposed algorithm on HSDPA in order to analyze the performance. The result shows that the proposed algorithm satisfies higher throughput and provides maximum the mobile service provider's revenue.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.4
• /
• pp.451-453
• /
• 2016

In this paper, we propose a Load Balance System for SFC based on DLP solution. SFC based on DLP solution does not distribute to the user data and each DLP server manages all traffic generated by the user device. When using existing algorithms such as the Load Balance Round Robin, Least Connection does not consider the resource usage of DLP server so traffic is not efficiently distributed due to different user traffic usage. It causes system failure and overload of the DLP server. Therefore, we propose the architecture of a Load Balance system for SFC based on DLP solution to perform the Load Balance based on the resource usage of DLP server through a LBM server in this paper.

• Journal of the Korean Vacuum Society
• /
• v.11 no.4
• /
• pp.218-224
• /
• 2002

A domestic round robin test(RRT) for the quantitative analysis of minor impurities was performed by a standard procedure and standard reference material. The certified reference material(CRM)s for B-doped Si thin film and analysis specimens and the analysis specimens were prepared by an ion beam sputter deposition method. These samples were certified by inductively coupled plasma mass spectrometry(ICP-MS) with isotope dilution method which il one of the most quantitative methods in chemical analysis. By using an international standard procedure(ISO/DIS-l4237) for the quantitative analysis of B in Si by SIMS, a domestic RRT was performed for these specimens. Although only a few laboratories participated in this RRT, the average B concentration well agreed with the certified value within 2% error.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.317-333
• /
• 2007

The Round-Robin Test (RRT) for ground response analysis was performed by Division of Geotechnical Earthquake Engineering of Korean Geotechnical Society. This research analyzed the influence of analysis methods on variation of ground response by using the results of this RRT. The analysis methods include equivalent linear analysis, non-linear analysis and effective stress analysis. A total of 5 teams among 12 teams applied two kinds of analysis methods. This research compared the results of these 5 teams and analyzed the variation of the results according to analysis methods. The compared results were shear stress-shear strain relation, transfer function, time history and the response spectrum of ground surface acceleration, peak ground acceleration, peak shear strain and maximum excess pore pressure ratio.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.4
• /
• pp.200-210
• /
• 2010

In this paper, different evaluation methods of Hot Spot Stresses (HSS) have been applied to four different welded structure details in order to compare them and to illustrate their differences. The HSSs at failure-critical locations were calculated by means of a series of finite element analyses. There was good overall agreement between calculated and experimentally determined HSS on the critical locations. While different methods and procedures exist for the computation of the structural hot-spot stress at welded joints, the recommendations within the International Institute of Welding (IIW) guideline concerning the 'Hot Spot Stress' approach were found to give good reference stress approximations for fatigue-loaded welded joints. This paper recommends and suggests an appropriate finite element modeling and hot spot stress evaluation technique based on round-robin stress analyses and experimental results of several welded structure details.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.820-830
• /
• 2016

Pipe wall thinning by flow-accelerated corrosion and various types of erosion is a significant and costly damage phenomenon in secondary piping systems of nuclear power plants (NPPs). Most NPPs have management programs to ensure pipe integrity due to wall thinning that includes periodic measurements for pipe wall thicknesses using nondestructive evaluation techniques. Numerous measurements using ultrasonic tests (UTs; one of the nondestructive evaluation technologies) have been performed during scheduled outages in NPPs. Using the thickness measurement data, wall thinning rates of each component are determined conservatively according to several evaluation methods developed by the United States Electric Power Research Institute. However, little is known about the conservativeness or reliability of the evaluation methods because of a lack of understanding of the measurement error. In this study, quantitative models for UT thickness measurement deviations of nuclear pipes and fittings were developed as the first step for establishing an optimized thinning evaluation procedure considering measurement error. In order to understand the characteristics of UT thickness measurement errors of nuclear pipes and fittings, round robin test results, which were obtained by previous researchers under laboratory conditions, were analyzed. Then, based on a large dataset of actual plant data from four NPPs, a quantitative model for UT thickness measurement deviation is proposed for plant conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.901-907
• /
• 1998

This paper presents a real-time control technique for the development of a ship main engine remote control system, In general several tasks are executed by the event-driven method in real-time system. However when some tasks have time delay components it is difficult to achieve good real-time performance. To cope with this problem a number of timers in most conventional system have been used. In this paper we introduce a real-time control methodology of dealing effectively with tasks including time delay components using one hardware timer. And also a speed control method of main engine which includes critical revolution range a crash astern and a emergency ahead function a switching method of remote control position and a flickering method for the indication of multi-stage alarm are discussed. As long as functions and method are imple-mented as forms of tasks the development of main engine remote control systems can be easy for different types of engines.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.83-84
• /
• 2008

The primary water stress corrosion cracking (PWSCC) of dissimilar metal weld based on Alloy 82/182 is one of major issues in material degradation of nuclear components. It is well known that the crack initiation and growth due to PWSCC is influenced by material's susceptibility to PWSCC and distribution of welding residual stress. Therefore, modeling the welding residual stress is of interest in understanding crack formation and growth in dissimilar metal weld. Currently in Korea, a numerical round robin study is undertaken to provide guidance on the welding residual stress analysis of dissimilar metal weld. As a part of this effort, the present paper investigates distribution of welding resisual stress of a ferritic low alloy steel nozzle with dissimilar metal weld using Alloy 82/182. Two-dimensional thermo-mechanical finite element analyses are carried out to simulate multi-pass welding process on the basis of the detailed design and fabrication data. The present results are compared with those from other participants, and more works incorporating physical measurements are going to be performed to quantify the uncertainties relating to modelling assumptions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.88-95
• /
• 2004

The previous disk scheduling schemes for best-effort applications do not guarantee the real-time requirement of multimedia objects and the real-time disk scheduling schemes do not satisfy throughput of multimedia server. So, this paper propose a two-step disk scheduling scheme to satisfy the requirement of best-effort as well as soft real-time applications. This scheme is based on the round robin algorithm that imposes different weights on the best-effort task and the real-time one. The experiment results on the Linux kernel have shown that both best-effort tasks and real-time tasks could get fair service.