Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Wall-Thinning Evaluation Procedure for Nuclear Power Plant Piping-Part 1: Quantification of Thickness Measurement Deviation

  • Yun, Hun (Material Engineering Department, KEPCO Engineering and Construction) ;
  • Moon, Seung-Jae (Material Engineering Department, KEPCO Engineering and Construction) ;
  • Oh, Young-Jin (Department of Mechanical Engineering, Hanyang University)
  • Received : 2015.09.07
  • Accepted : 2016.01.23
  • Published : 2016.06.25
Download PDF
⟨ Previous Next ⟩

Abstract

Pipe wall thinning by flow-accelerated corrosion and various types of erosion is a significant and costly damage phenomenon in secondary piping systems of nuclear power plants (NPPs). Most NPPs have management programs to ensure pipe integrity due to wall thinning that includes periodic measurements for pipe wall thicknesses using nondestructive evaluation techniques. Numerous measurements using ultrasonic tests (UTs; one of the nondestructive evaluation technologies) have been performed during scheduled outages in NPPs. Using the thickness measurement data, wall thinning rates of each component are determined conservatively according to several evaluation methods developed by the United States Electric Power Research Institute. However, little is known about the conservativeness or reliability of the evaluation methods because of a lack of understanding of the measurement error. In this study, quantitative models for UT thickness measurement deviations of nuclear pipes and fittings were developed as the first step for establishing an optimized thinning evaluation procedure considering measurement error. In order to understand the characteristics of UT thickness measurement errors of nuclear pipes and fittings, round robin test results, which were obtained by previous researchers under laboratory conditions, were analyzed. Then, based on a large dataset of actual plant data from four NPPs, a quantitative model for UT thickness measurement deviation is proposed for plant conditions.

Keywords

References

  1. Electric Power Research Institute (EPRI), TR-106611-R1, Flow Accelerated Corrosion in Power Plants, 2002.
  2. Electric Power Research Institute (EPRI), Utility Response to NRC Bulletin 87-01, Thinning of Pipe Walls in Nuclear Power Plants (NP-6066), 1988.
  3. Electric Power Research Institute (EPRI), TR-1022295, Mentoring Guide for Flow-Accelerated Corrosion Engineers, 2010.
  4. Electric Power Research Institute (EPRI), TR-3002000563, Recommendations for an Effective Flow-Accelerated Corrosion Program (NSAC-202L-R4), 2013.
  5. Electric Power Research Institute (EPRI), TR-1009599, CHECWORKS Steam/Feedwater Application - Guidelines for Plant Modeling and Evaluation of Component Inspection Data, 2004.
  6. Electric Power Research Institute (EPRI), CHUG Position paper No.8, Determining Piping Wear Caused by Flow-Accelerated Corrosion from Single-Outage Inspection Data, 2006.
  7. Electric Power Research Institute (EPRI), TR-1018456, Least Squares Methods for Evaluating Inspection Data, 2008.
  8. Electric Power Research Institute (EPRI), TR-1018466, Optimization of FACInspections:BWR Feedwater Systems, 2008.
  9. Electric Power Research Institute (EPRI), TR-1019175, Statistical Methods for the Analysis of Multiple Inspection Flow-Accelerated Corrosion Data, 2009.
  10. Electric Power Research Institute (EPRI), TR-1020528, Development of an averaged point-to-point method for inspection data, 2010.
  11. Electric Power Research Institute (EPRI), TR-1020527, Evaluation of Multiple-Inspection Flow-accelerated Corrosion Data on Unequal Grids, 2010.
  12. D. Gusso, Total point method study, Presented at the 2010 CHUG meeting, 2010.
  13. J. Horowitz, Formal statistical methods, Presented at the 2010 CHUG meeting, 2010.
  14. M.I. Jyrkama, M.D. Pandey, Methodology for predicting flowaccelerated corrosion wear using unreferenced multiple inspection data, Nucl. Eng. Design 250 (2012) 317-325. https://doi.org/10.1016/j.nucengdes.2012.06.003
  15. Electric Power Research Institute (EPRI), NP-5410, NDE of Ferritic Piping for Erosion/Corrosion, 1987.
  16. W.G. Yi, Evaluation of statistical reliability on ultrasonic thickness inspection results by round robin test, Master thesis, Pusan National University, Korea, 2007.
  17. W.G. Yi, M.R. Lee, J.H. Lee, S.H. Lee, A study on the ultrasonic thickness measurement of wall thinned pipe in nuclear power plants, 12th A-PCNDT 2006 - Asia Pacific Conference on NDT, Auckland (New Zealand), 2006.
  18. T.R. Kim, et al., Optimization of Thinned Pipe Management Program and Application, Final Report, Korea Hydro & Nuclear Power, 2007.
  19. I. Miller, M. Miller, E. John, Freund's Mathematical Statistics with Applications, seventh ed., Pearson Education, Inc., Prentice Hall, Upper Saddle River, 2004.

Cited by

  1. Development of wall-thinning evaluation procedure for nuclear power plant piping - Part 2: Local wall-thinning estimation method vol.52, pp.9, 2016, https://doi.org/10.1016/j.net.2020.03.001
  2. Probabilistic analysis of electromagnetic acoustic resonance signals for the detection of pipe wall thinning vol.36, pp.1, 2016, https://doi.org/10.1080/10589759.2019.1679141
  3. Probabilistic evaluation of EMAR signals to evaluate pipe wall thickness and its application to pipe wall thinning management vol.122, pp.None, 2021, https://doi.org/10.1016/j.ndteint.2021.102475