• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.2
• /
• pp.20-24
• /
• 2015

During refueling Outage, In-service inspections(ISIs) for the Nuclear Power Plant components are mandatory requirement in accordance with ASME Code Sec. XI. Especially, in current ultrasonic testing is one of the most important NDT techniques that are used for volumetric examination methods for nuclear power plant components, and accurate sizing of flaw indication by UT is essential to assure the integrity of the components. However, ASME code specifies minimum requirement for vessel examination procedure, and so far many different flaw sizing approaches have been tried to apply. Through the Round Robin Test(RRT), the accuracy of ultrasonic flaw sizing using DAC techniques was measured with the mock-ups simulating typical pressure vessel welds. These mock-ups contain artificially introduced flaws of known size and location. This paper shows experimental comparison data on the accuracy of techniques using such as 6dB drop, 50%DAC, 20%DAC and 20%DAC with beam spread correction, and also shows that diverse DAC techniques can be effectively applied to the assessment of the flaw sizing for pressure vessel welds in the stage of welding and fabrication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12B
• /
• pp.847-854
• /
• 2005

Many of scheduling algorithms that provide a pre-defined bandwidth to a traffic flow fall into a category of Latency-rate (LR) server, the delay of whose network can be simply calculated by adding up individual 'latencies' of each LR servers. Deficit Round Robin (DRR) is one of such LR servers and the simplest one to implement, so that it is adopted in many real systems. In this research we suggest an improved version of DRR, the DRR with Instant Service (DRR-IS), and analyze it. We have proved that the DRR-IS is still an LR sewer and have obtained its latency. The DRR-IS, compared with DRR, turns out to have the same complexity while provide about $30\%$ better latency.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.3
• /
• pp.256-263
• /
• 2009

After several PWSCCs were found in Bugey(France), Ringhals(Sweden), Tihange(Belgium), Oconee, Arkansas, Crystal Fever, Davis-Basse, VC Summer(U.S.A.), Thuruga(Japan), USNRC and PNNL started the research on PWSCC, that is, the PINC project. USNRC required KINS to participate in the PINC project in May 2005. KINS organized the Korean consortium at March 2006 and Pre-RRT for RVHP were performed for the preparation of PINC RRT. Through these preliminary RRT, Korea NDE teams can learn and develop the detection and sizing technique for RVHP dissimilar metal weld. These techniques are now being prepared in Korea and need to be utilized for the In-service inspection of the RVHP and BMI of Korea Nuclear Power Plants. PINC RRT mock-ups will be helpful to training.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.231-236
• /
• 2005

Calibration capability was evaluated using the reference-grade platinum resistance thermometer (PRT) in the temperature range of $-50^{\circ}C$ to $250^{\circ}C$ for the national calibration centers. The reference-grade PRT was calibrated at the several fixed points, which was composed by the freezing points of Sn, In, the melting point of Ga and the triple point of water and Hg, before and after the round-robin test (RRT) experiments. The temperature scale of reference-grade PRT was compared to the local standard PRT's using the system of the national calibration centers. $E_{n}$ values was calculated by the temperature difference between the reference-grade PRT and the local standard PRT, and the best measurement capability. Finally, the capability of the national calibration centers was evaluated by the $E_{n}$ values.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2009-2014
• /
• 2012

The general bus system architecture consists of masters, slaves, arbiter, decoder and so on in shared bus. As several masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, The efficiency of bus usage can be determined. Fixed Priority, Round-Robin, TDMA, Lottery arbitration are studied in conventional arbitration method. In this paper, we draw the performance comparison of TDMA and Lottery bus arbitration policy developed recently due to farious conditions and propose the methods of performance improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7B
• /
• pp.653-663
• /
• 2002

UMTS/GPRS has its own QoS architecture, but additionally needs to support IP-QoS to provide Internet services. This paper describes an IP-QoS provisioning mechanism in the MPLS-based UMTS/GPRS network. We propose a QoS framework that includes the functional architecture of the MPLS-based GPRS networks and the efficient scheduling mechanism based on Diffserv model. The proposed scheduling mechanims is especially focused on the QoS support for real-time services. It also includes a new buffer management scheme that combines the priority queuing and weighted round robin method. The ns-2 simulator has been used to verify the validity of the proposed scheduling method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.9
• /
• pp.712-719
• /
• 2008

Light Oil Flow Standard System(LOFSS), as a national oil flow standard system, in Korea Research Institute of Standards and Science(KRISS) was developed for oil flowmeter calibration, and the expanded uncertainty of flow quantity determination was estimated within 0.04 %. In order to improve the reliability of the LOFSS measurement, a proficiency test was carried out in the flow range of 20 and $240\;m^3/h$ (Reynolds number $20,000{\sim}900,000$). A turbine flowmeter was used as a transfer package in round robin test. The water flow standard system of KRISS, the pipe prover of the national calibration and test organization and the master meter calibrator of the turbine flowmeter supplier, which used the different working fluid respectively, were compared with the turbine flowmeter measurement. The maximum difference of measurement was 0.15 % between the LOFSS and the pipe prover. The En numbers of the each system measurement were evaluated at the same Reynolds number. It was found that the En numbers were less than 1 in the comparison, which means the procedures of the uncertainty estimation of the each calibrators were reasonable and reliable.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.5
• /
• pp.1-9
• /
• 2017

Recently, flash memory has been in a great demand from embedded system sectors for storage devices. However, program/erase (P/E) cycles per block are limited on flash memory. For the limited number of P/E cycles, many wear leveling techniques are studied. They prolonged the life time of flash memory using information tables. As one of the techniques, block erase table (BET) method using a bit array table was studied for embedded devices. However, it has a disadvantage in that performance of wear leveling is sharply low, when the consumption of memory is reduced. To solve this problem, we propose a novel wear leveling technique using Sampling-based Block Erase Table (SBET). SBET relates one bit of the bit array table to each block by using exclusive OR operation with round robin function. Accordingly, SBET enhances accuracy of cold block information and can prevent to decrease the performance of wear leveling. In our experiment, SBET prolongs life time of flash memory by up to 88%, compared with previous techniques which use a bit array table.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2703-2708
• /
• 2014

The conventional bus system architecture consists of masters, slaves, arbiter, decoder and so on in shared bus. As several masters can't use a bus concurrently, arbiter plays an role in arbitrating the bus. The efficiency of bus usage can be determined by the selection of arbitration method. Fixed Priority, Round-Robin, TDMA and Lottery arbitration policies are studied in the conventional arbitration method where the bus transaction cycle, the wait cycle and the priority are primarily considered. In this paper, we propose the arbitration method that considers the wait cycle. Furthermore, we verify the bus transaction cycle and the wait cycle compared with the other arbitration methods through TLM(Transaction Level Model).

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.330-341
• /
• 2007

This work analyzes the performance of the parallel packet switch (PPS) with a sliding window (SW) method. The PPS involves numerous packet switches that operate independently and in parallel. The conventional PPS dispatch algorithm adopts a round robin (RR) method. The class of PPS is characterized by deployment of parallel low-speed switches whose all memory buffers run more slowly than the external line rate. In this work, a novel SW packet switching method for PPS, called SW-PPS, is proposed. The SW-PPS employs memory space more effectively than the existing PPS using RR algorithm. Under identical Bernoulli and bursty data traffic, the SW-PPS provided significantly improved performance when compared to PPS with RR method. Moreover, this investigation presents a novel mathematical analytical model to evaluate the performance of the PPS using RR and SW method. Under various operating conditions, our proposed model and analysis successfully exhibit these performance characteristics including throughput, cell delay, and cell drop rate.