• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.21-26
• /
• 2016

산업체에서 널리 사용되고 있는 유도전동기의 회전자를 제작하기 위하여 rotor core slot에 Cu bar를 열박음(shrinkage fit)작업으로 고정한 후 bar 표면을 punch로 원주방향으로 순차적으로 1.5~3mm 압입(swaging)작업시 rotor core slot과 bar 접촉면에 작용하는 contact tangential force의 크기와 분포를 단순화된 2차원 plane strain 해석모델을 사용하여 각각의 압입조건에 대하여 평가하였으며 또한 생산성 향상을 고려한 rotor core slot 설계시 slot 형상에 따른 접촉력 분포를 평가하여 rotor core slot 설계시 필요한 정보를 제공하고자 수치해석적인 방법을 사용하여 parametric study를 수행하였다. 이러한 탄소성 수치해석 결과 1) rotor core 압입작업시 bar 접촉면에 작용하는 contact force는 소성변형이 먼저 발생하는 bar 상부에 크게 작용하며 2) 순차적인 rotor core 압입작업시 bar 접촉면에 작용하는 total contact force는 바로 인접한 bar에 대한 압입작업에 의해서만 영향을 받으며 그 영향으로 약 55% 정도 total contact force가 증가하며 3) 생산성을 고려하여 rotor core를 설계하는 경우에 contact force를 증가시키기 위해서는 core slot의 폭보다 길이를 길게 하는 것이 바람직하다는 사실을 알 수 있었다.

• 한국주조공학회지
• /
• 제36권1호
• /
• pp.10-17
• /
• 2016

Numerical analysis has been performed to evaluate effect of the shape variables such as core length, slot width and slot length on misrun in aluminum die casting process for motor rotor. The predictive method for misrun in diecasting process was established by comparing the result of numerical analysis and an actual motor rotor. Solidification modulus was introduced to predict quantitatively the castability of aluminum diecasting process for motor rotor. It was found that there are minimum critical solidification modulus and slot width to prevent misrun according to core length through diecasting limit diagram proposed using the predictive method. The critical solidification modulus and slot width increase as core length increases to prevent misrun of aluminum motor rotor in diecasting process. Based on the results, the design criteria of slot shape to prevent misrun of aluminum motor rotor with various core length were established.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1783-1787
• /
• 2011

The slip frequency is included in feature frequency for fault diagnosis of rotor bar, so rotating rotor speed is needed. In this study, rotor slot harmonic(RSH) method is suggested for speed estimation of induction motor. When the rotor is rotating, motor current signal include the harmonic signal of back-emf voltage related with number of rotor slot. So from the power spectrum of current signal, the rotor speed can be founded. This method of rotor speed estimation gives the slip frequency, and the feature frequency of rotor bar fault can be calculated. Comparing with stroboscope speed meter, the error rate of suggested method is less than 0.1[%].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.208-210
• /
• 1994

In this paper, the design sensitivity evaluation based on the 2-dimensional finite clement discretization is presented for the voltage source and eddy current problem. And it is applied to the two shape design problems of the rotor slot of 3-phase squirrel cage induction motors. The first is to increase the starting torque while keeping the rated torque fixed. The other is only to increase the torque at the rated speed while keeping the starting torque fixed. As an optimization method, the Gradient Projection method is used to control casily the torques for various speeds of rotor. One fourth of rotor is analyzed by using a semi-periodic boundary condition. Because the shape of rotor slot has much influence on the slip torque characteristic, the 10 design parameters are taken on the interface between rotor core and rotor bar. The initial shape of rotor slot is the trapezoidal typo with rounding corners.

• 전기의세계
• /
• 제21권2호
• /
• pp.5-8
• /
• 1972

The purpose of this paper is, as a preliminary step to study on the method of analysing the torque of toothed solid iron rotor, to make an inquiry into the torque calculation formula of homogenious solid iron rotor without slot. The starting point for its theoretical analysis on torque generated by eddy current in solid iron rotor is based on the maximum air gap flux density. In solid rotor induction motor, torque generated by rotor core is considerably large in the range of large slip. The calculated value and observed value on the test machine are also examined in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2077-2078
• /
• 2011

Now a days, the induction motor is widely used in industry automation. Without monitoring the motor fault, maintenance cost is increased undesirably high. The slip frequency is included in the feature frequency, so rotating rotor speed is needed. In this paper, a sensorless motor speed estimation method, rotor slot harmonic(RSH) method is suggested and a solution of rotor bar diagnosis is proposed for motor running with light-load. When the rotor is rotating, it shows the harmonic signal of back-emf voltage related with number of rotor slot. So from the power spectrum of current signal, we can find the rotor speed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.30-36
• /
• 2002

This paper presents a developed deep slot squirrel cage induction motor fur the fan. Nearly all of the induction motors consist of two parts, rotor and stator, and the position of rotor is generally inside of stator. However, the rotor of the developed induction motor is located outside of stator. It is believed that the outside rotor type induction motor is suitable for the fan due to its large inertia, that is, it is considered that the change of air flow rate resulting from input power or load fluctuation is reduced. It is considered that the results of this paper can be used for the development of the outside rotor type induction motor.

• 한국소음진동공학회논문집
• /
• 제19권11호
• /
• pp.1133-1143
• /
• 2009

좁은 슬롯을 포함한 디스크 브레이크 로터의 소음 방사특성을 전산해석과 이론적 계산을 합성한 방법으로 검토하였다. 첫 단계로 로터와 기본 치수가 동일하고 동일한 슬롯을 보유한 후판 환형 디스크의 소음방사 특성을 유한요소해석을 구한 모달 진동 데이터를 바탕으로 기존의 해법을 이용하여 계산하고 수치해석결과로 검증하였다. 다음으로 이 결과를 유한요소해석으로 구한 샘플 로터의 고유진동 특성에 적용, 고유진동으로 인한 소음방사를 계산한 다음 그 결과를 경계요소법을 이용하여 검증하였다. 마지막으로 이 결과를 바탕으로 로터에 고정된 조화가진 및 로터 주위를 회전하는 조화력에 의해 방사되는 소음 및 진동 특성을 검토하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권6호
• /
• pp.328-333
• /
• 2015

Squirrel cage induction motors have mostly been used for their small capacity because the starting torque is smaller than the starting current during start-up. However, as more and more mid-to-large capacity motors are developed, the demands for improvements in performance characteristics have also increased. In this study, the starting characteristics of squirrel cage induction motors were analyzed based on the rotor materials and shapes using a finite element method to provide design data suitable for different use purposes and capacities. We further completed analysis by combining electromagnetic equations deduced from Maxwell’s equations and the circuit equations of stators and rotors. A moving coordinator was introduced to rotate the rotor during the analysis, and the torques calculated via the finite element method were combined with the motion equations to calculate the position and angular velocity of the rotors at the next time, thereby analyzing the transient characteristics. The analysis results of the transient characteristics were applied to a 3-phase 4-pole 5-hp induction motor to calculate the starting torque, speed, and rotation angle of the rotors. In the reference model, the materials and shapes of the rotor slot were changed to copper and silicon copper and a deep slot, shallow slot, and long-neck-shaped slot.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1277-1282
• /
• 2003

The purpose of the present paper is to investigate the noise and vibration characteristics of externally pressurized air proceeding bearings with a circular slot restrictor. To do this, the nonlinear transient analysis including rotor imbalance was performed for a rotor-bearing system. The effects of radial clearance and the width of the bearing and mass eccentricity of the rotor on the noise and vibration characteristics of the bearing are also examined. The results show that the noise and vibration of the rotor-bearing system first increase up to critical speed of the system, and then decrease up to instability threshold speed of the system as the rotational speed of the rotor increases, and the noise of the bearing is markedly influenced by the mass eccentricity of the rotor and the radial clearance and the width of the bearing.