• 한국자원식물학회지
• /
• 제15권1호
• /
• pp.8-17
• /
• 2002

새 번식방법 개발을 위해 둥굴레 뿌리는 눈이 없어도 부정아가 발생된다는 점에 착안하여 뿌리길이와 굵기에 대한 부정아 발생에 관한 시험 연구를 한 결과는 다음과 같다. 1년차는 뿌리길이가 5cm 경우 66.5%지만 15cm에서는 113% 부정아 발생되었고, 뿌리의 굵기 5mm이하는 98.3%지만 10mm이상은 113.3%로 46.7% 차이를 보였다. 2년차는 부정아 생성률은 15cm에서는 1년차의 3배, 시험구 설치 당시 전혀 눈이 없는 상태에서 4배의 증식을 보였다. 용토는 일반토양 2.6배 보다 모래나 펄라이트가 3.1~3.3배 증식 되었다. 대량번식을 위한 가장 좋은 방법은 10mm 둥굴레 뿌리를 5cm로 절단하여 모래에 식재하는 방법으로 판단된다.

• Journal of Welding and Joining
• /
• 제1권1호
• /
• pp.37-46
• /
• 1983

This paper describes a study of fillet welded joint stressed perpendicular to the weld line. The finite element method was used to determine the stress intensity factor for cruciform joint at weld toe and root cracks according to variation of H/Tp, weld angle and main plate thickness. But, in this study, weld angle was fixed at 45.deg., since the variation of weld angle affect the stress intensity factor little, also main plate thickness was fixed. Pulsating tension fatigue test was done at the second phase of experiment. The work using the concepts of the fracture mechanics on the stable crack growth, was in the correlation of the experimental fatigue stress-life behavior because the fatigue behaviors of various joint geometries are related to the stress intensity factors calculated by F.E.M. analysis. Main results obtained are summarized as follows. 1) According to the propagation of toe crack, the variation of the stress intensity factor at root crack is obvious as H/Tp is smaller. 2) According to the propagation of root cracks, the change of the stress intensity factor of the toe is very large with propagation of root crack. 3) The calculation formula of the stress intensity factor of crack propagation at the root crack was obtained. 4) The calculation formula of the stress intensity factor at the toe cracks was obtained in similar manner. 5) From the results of experiment, the velocity of fatigue crack propagation at the weld toe and root was estimated.

• 대한치과의사협회지
• /
• 제40권7호통권398호
• /
• pp.542-547
• /
• 2002

This study was aimed to help diagnose the vertical root fractures in endodontically and in nonendodontically treated teeth. This was a study about mine teeth with a vertical root fractures. Four cases were nonendodontically treated teeth and five cases were endodontically treated teeth. A collection of information including past dental history, periodontal probing, and X-ray was gathered on each case. One of the endodontic cases had no periodontal pocket depth and was in acute pain. It was confusing to find whether causes were because of endodontic failure or vertical root fractures. Most of the vertical root fractures were found in patients aged between 50 and 60. Vertical root fractures were found in the molar and premolar of maxillary and mandibular teeth. The second molars repecially, which had C shaped roots had vertical root fractures with apical propagation type. The apical propagation type means that vertical root fracture initiates in root apex and propagate to coronal root. The teeth with vertical root fractures of the apical propagation type, which was in acute pain, were very difficult in differential diagnosis of periodontal lesion and endodontic failure. Therefore, the dental history was very important to make a differential diagnosis. Past pain history repeated uncomfortable symptoms in bite was a key of differential diagnosis.

• Journal of Forest and Environmental Science
• /
• 제34권1호
• /
• pp.50-52
• /
• 2018

The effect of basal nutrients concentrations and exogenous auxin for root induction from leaves of Sedum takesimense were investigated for mass-propagation. Root induction rates were significantly different from the concentrations of basal salts but not influenced by supplemented IBA in the medium. The lowest concentration of MS basal salts (1/10) was most effective to induce roots from leaves followed 1/5 MS, and 1/2 and full strength MS medium. Supplement of IBA $10{\mu}M$ in the medium did not improve the root induction that resulted no differences compare to the hormone free media. Rooted leaves were transplanted in soil and survived in greenhouse.

• Journal of Forest and Environmental Science
• /
• 제34권2호
• /
• pp.173-175
• /
• 2018

Stem cuttings of three Rubus species native to Korea were treated by two commercial root stimulation formula for propagation. Differences among the species was obvious, toot was induced relatively easily on R. hongnoensis. Fifty percent of stem rooted without any treatment on this species and two stimulators was effective to increase the root induction. On the other hand, two other species, R. schizostylus and R. ribisoideus, had very low percent of rooting. Treatment using root stimulators was effective but still lower than that of R. hongnoensis. Root induction was not influence by the medium that resulted no differences between two media.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2022년도 추계학술대회
• /
• pp.63-63
• /
• 2022

Pear (Pyrus spp.) is a typical fruit and grown in the temperate climate regions throughout the world. Development of appropriate methods for in vitro propagation and root induction are important to increase the production rate and plant quality rapidly. This study was conducted to find the most appropriate media conditions for in vitro propagation and rooting of three pear cultivars, 'Barttlett', 'BaeYun No.3' and 'Oharabeni'. In vitro propagation was induced on Murashige and Skoog medium (MS) with 2.0 mg/L N6-benzyladenine (BA) and 0.2 mg/L indole-3-butyric acid (IBA) medium. For root induction of these cultivars, the shoot explants of the propagated plants were cultured on two different media containing 1/2 MS medium containing 0.2 mg/L IBA with 15 g/L Sucrose (Rooting Medium 1, RM1) and 1/4 Linsmaier and Skoog medium (LS) medium containing 1 mg/L IBA and 1 mg/L NAA hormone with 7.5 g/L glucose (Rooting Medium, RM2) and after 2 weeks, the plants on the RM2 medium are transferred on RM1 medium (RM2 condition). After nearly seven weeks, percentage of rooting formation were 22.2% in RM1 and 30% in RM2 conditions for Barttlett and 70% in RM1 and 60% in RM2 conditions for Oharabeni cultivars. No differences in these cultivars were observed between RM1 and RM2 conditions. However, BaeYun No.3 cultivar was observed 0% in RM1 and 72.7% in RM2 conditions. This study will help to propagation and root induction of in vitro plants for various pear cultivars.

• Plant Resources
• /
• 제7권3호
• /
• pp.222-225
• /
• 2004

In Japan, propagation of cyclamen is mainly from seedlings. However, seeds are expensive and germination is slow and non..uniform. Therefore, to achieve genetically uniform propagation, multiplication must be vegetative. The rooted tuberous stems without shoots as sources of explants were cultured on the media containing BA and sucrose. After 30 days cultivation, tuberous roots were produced from the root ends attached to a tuberous stem and its capability was dependent on the type of media. The highest percentage of tuberous root formation was observed in Culture on the medium of 1/3 MS containing 0.05mgL$^{-1}$ NAA, 0.5mg L$^{-1}$ BA and 5% sucrose. Growth rates of the tuberous roots were greatly influenced by the cutting positions of a root in explants. The highest growth of was observed if small amount of root end was cut at initiation of tissue culture.

• Restorative Dentistry and Endodontics
• /
• 제42권4호
• /
• pp.332-341
• /
• 2017

Objectives: To determine the incidence of crack formation and propagation in apical root dentin after retreatment procedures performed using ProTaper Universal Retreatment (PTR), Mtwo-R, ProTaper Next (PTN), and Twisted File Adaptive (TFA) systems. Materials and Methods: The study consisted of 120 extracted mandibular premolars. One millimeter from the apex of each tooth was ground perpendicular to the long axis of the tooth, and the apical surface was polished. Twenty teeth served as the negative control group. One hundred teeth were prepared, obturated, and then divided into 5 retreatment groups. The retreatment procedures were performed using the following files: PTR, Mtwo-R, PTN, TFA, and hand files. After filling material removal, apical enlargement was done using apical size 0.50 mm ProTaper Universal (PTU), Mtwo, PTN, TFA, and hand files. Digital images of the apical root surfaces were recorded before preparation, after preparation, after obturation, after filling removal, and after apical enlargement using a stereomicroscope. The images were then inspected for the presence of new apical cracks and crack propagation. Data were analyzed with ${\chi}^2$ tests using SPSS 21.0 software. Results: New cracks and crack propagation occurred in all the experimental groups during the retreatment process. Nickel-titanium rotary file systems caused significantly more apical crack formation and propagation than the hand files. The PTU system caused significantly more apical cracks than the other groups after the apical enlargement stage. Conclusions: This study showed that retreatment procedures and apical enlargement after the use of retreatment files can cause crack formation and propagation in apical dentin.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1589-1597
• /
• 2018

Fatigue tests and numerical analysis were carried out to evaluate the fatigue performance at the U-rib to deck welded joint in steel box girder. Twenty specimens were tested corresponding to different penetration rates (80 and 100%) under fatigue bending load, and the fatigue strength was investigated based on hot spot stress (HSS) method. The detailed stress distribution at U-rib to deck welded joint was analyzed by the finite element method, as well as the stress intensity factor of weld root. The test results show that the specimens with fully penetration rate have longer crack propagation life due to the welding geometry, resulting in higher fatigue failure strength. The classification of FAT-90 is reasonable for evaluating fatigue strength by HSS method. The penetration rate has effect on crack propagation angle near the surface, and the 1-mm stress below weld toe and root approves to be more suitable for fatigue stress assessment, because of its high sensitivity to weld geometry than HSS.

• Journal of Plant Biotechnology
• /
• 제46권3호
• /
• pp.143-157
• /
• 2019

Medicinal plants are high-value natural resources that have been used as precautionary drugs by many people globally. The increasing global demand for bioactive compounds from medicinal plants has led to the overexploitation of many valuable species. One widely used approach to overcome this problem is the use of adventitious root cultures as a propagation strategy. This review examines the scientific research published globally on the application of adventitious root cultures for many medicinal plants. Adventitious roots generated under aseptic environments in suitable phytohormone-augmented medium exhibit high growth rates and production of important secondary metabolites. Parameters such as medium properties and composition, growth hormone type, and elicitation strategies for in vitro grown adventitious roots of medicinal plants, are the main topics discussed in this review. We also examine current developments in bioreactor system cultivation for plant bioactive compounds using adventitious root cultures, a technology with possible commercial applications, via several studies on adventitious root culture of medicinal plants in which bioreactor systems play a role. In conclusion, the development of adventitious root cultures for medicinal plants is highly useful because of their capability for vegetative propagation and germplasm preservation.