• 융합보안논문지
• /
• 제22권5호
• /
• pp.127-134
• /
• 2022

호국군은 비록 짧은 역사였지만 대한민국 예비군제도의 효시라는 점에서 큰 의미를 가진다. 이러한 호국군에 대한 연구는 그동안 소극적으로 진행되어 왔다. 그나마도 진행된 연구는 역사적 관점에서 단편적인 서술에만 국한되어 왔고 호국군의 성격을 규명하지는 못하였다. 따라서 본 연구에서는 호국군이 존재했던 시대적 배경을 살펴본 다음 법적·제도적, 군사적, 정치적 관점의 새로운 시선에서 호국군의 성격을 규명하고자 노력하였다. 연구결과를 종합해보면 호국군은 법률적 지지를 받으면서 전시에 대비한 효율적인 제도로 탄생하였다. 그리고 선진국형 모병제도인 지원병제를 채택했다는 점, 호국군만의 별도 사관학교를 통해 장교를 양성했으며 후방지역작전에 기여했다는 점은 군사적 측면에서 높이 평가된다. 반면, 호국군을 창설하는 과정부터 정치권과 비군사단체가 결탁하였다는 점은 부정적이다. 끝으로 본 연구를 계기로 6.25전쟁 이전에 존재했던 예비전력에 관한 연구가 좀 더 활발해지기를 기대한다.

• Structural Engineering and Mechanics
• /
• 제84권3호
• /
• pp.375-391
• /
• 2022

This paper discussed and analyzed the interfacial stress distribution characteristic of adjacent cracks in Carbon Fiber Reinforced Polymer (CFRP) plate strengthened concrete slabs. One un-strengthened concrete test beam and four CFRP plate-strengthened concrete test beams were designed to carry out four-point flexural tests. The test data shows that the interfacial shear stress between the interface of CFRP plate and concrete can effectively reduce the crack shrinkage of the tensile concrete and reduces the width of crack. The maximum main crack flexural height in pure bending section of the strengthened specimen is smaller than that of the un-strengthened specimen, the CFRP plate improves the rigidity of specimens without brittle failure. The average ultimate bearing capacity of the CFRP-strengthened specimens was increased by 64.3% compared to that without CFRP-strengthen. This indicites that CFRP enhancement measures can effectively improve the ultimate bearing capacity and delay the occurrence of debonding damage. Based on the derivation of mechanical analysis model, the calculation formula of interfacial shear stress between adjacent cracks is proposed. The distributions characteristics of interfacial shear stress between certain crack widths were given. In the intermediate cracking region of pure bending sections, the length of the interfacial softening near the mid-span cracking position gradually increases as the load increases. The CFRP-concrete interface debonding capacity with the larger adjacent crack spacing is lower than that with the smaller adjacent crack spacing. The theoretical calculation results of interfacial bonding shear stress between adjacent cracks have good agreement with the experimental results. The interfacial debonding failure between adjacent cracks in the intermediate cracking region was mainly caused by the root of the main crack. The larger the spacing between adjacent cracks exists, the easier the interfacial debonding failure occurs.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.109-109
• /
• 2022

The global population is increasing every year, and the amount of food waste is also increasing. Direct landfilling of food waste has been prohibited since 2005, and in accordance with the London Convention in 2013, the discharge of livestock manure, sewage sludge, and food waste into the sea is prohibited. In the case of incineration to treat the discharged food waste, the heat point is lowered due to the moisture in the food waste itself, so fuel must be added. Therefore, this study was conducted to get basic data for setting the limit of application by investigating the growth and yield of crops after treating food waste dry powder mixed fertilizer (MF) on red pepper. In the experiment, continuous cultivation was carried out for two years in 2021 (1st year) and 2022 (2nd year). The treatment groups were set as Not Treatment (NT), Chemical Fertilizer (CF), Mixed Fertilizer (MF), Mixed Fertilizer×2 (MF×2). After harvest, crop growth and yield were investigated. As a result of the 1st years of growth survey, CF, MF, MF×2 show significant difference in shoot length compared to NT. About fresh weight and dry weight, CF show significant difference compared to NT. The 2nd years of growth survey, the shoot and root length, fresh weight did not show significant difference with NT. In case of dry weight, MF is significant increased compared to NT. As a result of the yield survey of the 1st year, all treatment groups did not show a significance in yield compared to the NT. In case of 2nd year, all treatment groups show significantly increased value compared to NT. The yield of MF was highest among the treatment groups. In the future, it is thought that it is necessary to quantitatively evaluate the effect of food waste dry powder mixed fertilizer through additional experiments and continuous cultivation, and to establish an appropriate amount of use and establishment of a manual based on this.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권3호
• /
• pp.215-228
• /
• 2023

The State Space Representation (SSR) method provides individual corrections for each Global Navigation Satellite System (GNSS) error components. This method can lead to less bandwidth for transmission and allows selective use of each correction. Precise Point Positioning (PPP) - Real-Time Kinematic (RTK) is one of the carrier-based precise positioning techniques using SSR correction. This technique enables high-precision positioning with a fast convergence time by providing atmospheric correction as well as satellite orbit and clock correction. Currently, the positioning service that supports PPP-RTK technology is the Quazi-Zenith Satellite System Centimeter Level Augmentation System (QZSS CLAS) in Japan. A system that provides correction for each GNSS error component, such as QZSS CLAS, requires monitoring of each error component to provide reliable correction and integrity information to the user. In this study, we conducted an analysis of the performance of residual error bounding for each error component. To assess this performance, we utilized the correction and quality indicators provided by QZSS CLAS. Performance analyses included the range domain, dispersive part, non-dispersive part, and satellite orbit/clock part. The residual root mean square (RMS) of CLAS correction for the range domain approximated 0.0369 m, and the residual RMS for both dispersive and non-dispersive components is around 0.0363 m. It has also been confirmed that the residual errors are properly bounded by the integrity parameters. However, the satellite orbit and clock part have a larger residual of about 0.6508 m, and it was confirmed that this residual was not bounded by the integrity parameters. Users who rely solely on satellite orbit and clock correction, particularly maritime users, thus should exercise caution when utilizing QZSS CLAS.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제29권1호
• /
• pp.18-27
• /
• 2024

In this study, the pump and fertilize (PAF) was applied to reduce nitrogen infiltration into groundwater at three corn cultivation sites over a three-year period, and its effectiveness was evaluated. PAF involves pumping nitrate-contaminated groundwater and using it for irrigation, thereby replacing the need for chemical fertilizers. This method not only substitutes chemical fertilization, but also reduces nitrogen infiltration into groundwater through root zone consumption. To confirm PAF's effectiveness, an equal amount of nitrogen was applied in each cultivation plot, either through chemical fertilizer or irrigation with nitrate-contaminated groundwater. Regular monitoring of infiltrating pore water and groundwater was conducted in each cultivation plot. The linear regression slope for nitrate concentration in the pore water after repeated application of PAF ranged from -3.527 to -8.3485 mg-N/L/yr, confirming that PAF can reduce nitrate concentration in the pore water. With an increasing proportion of PAF, the infiltrating nitrate mass in pore water was reduced by 42% compared to plots fertilized with chemical fertilizer. Additionally, the linear regression slope of nitrate concentration in groundwater was calculated as -2.2999 and -9.2456 mg-N/L/yr. Therefore, continuous application of PAF in rural areas is expected to significantly contribute to reducing nitrate concentration in groundwater.

• Imaging Science in Dentistry
• /
• 제54권1호
• /
• pp.63-69
• /
• 2024

Purpose: The objective of this study was to determine the minimum number of teeth in the anterior dental arch that would yield accurate results for individual identification in forensic contexts. Materials and Methods: The study involved the analysis of 28 sets of 3-dimensional (3D) point cloud data, focused on the labial surface of the anterior teeth. These datasets were superimposed within each group in both genuine and imposter pairs. Group A incorporated data from the right to the left central incisor, group B from the right to the left lateral incisor, and group C from the right to the left canine. A comprehensive analysis was conducted, including the evaluation of root mean square error (RMSE) values and the distances resulting from the superimposition of dental arch segments. All analyses were conducted using CloudCompare version 2.12.4 (Telecom ParisTech and R&D, Kyiv, Ukraine). Results: The distances between genuine pairs in groups A, B, and C displayed an average range of 0.153 to 0.184mm. In contrast, distances for imposter pairs ranged from 0.338 to 0.522 mm. RMSE values for genuine pairs showed an average range of 0.166 to 0.177, whereas those for imposter pairs ranged from 0.424 to 0.638. A statistically significant difference was observed between the distances of genuine and imposter pairs(P<0.05). Conclusion: The exceptional performance observed for the labial surfaces of anterior teeth underscores their potential as a dependable criterion for accurate 3D dental identification. This was achieved by assessing a minimum of 4 teeth.

• 복식
• /
• 제30권
• /
• pp.261-274
• /
• 1996

In the present age dominate by both cer-taingty of 1% and uncertainty of 99% 'Fuzzy thinking' of Bart Kosko that is the way to solve the problems by the scientific way through a worldview of Buddhism or Taoism greatly prevails around the world over 'Lateral greatly prevails around the world over 'Lateral thinking' and the authenticity or the right and-wrong of the uncertainty which is the thinking way to find the answer of the problems of illogical way of Edward de Beno against the western vertical thinking were Concurrently fashion designers over the world also adopt the oriental elements. But there exist differences of thoughts between the orient and the occident. And they have dif-ferent thinking way of aestheticism and references of the value on the beauty. Not only beauty but the view through the mind as intuitional thought in which not only the rec-ognition of sense but also the rationalism and the naturalness play key role. The aesthetic sense in the orient contains both the truth and virtue. 2) The beauty of the mean It's from the thought of neutralization of Confucius. The mean or moderation state which in harmony with ethical virtue and aes-thetic beauty is the ideal and is the ultimate. Therefore the thought of Confucian is the creativity in which the balance and the har-mony is most important. Fashion design is also one of the representation of the mean because the spirit of the designer is harmonized for-mlessly with the object of the model of the fashion design. 2) The beauty of skillfulness It indicates the Taoism of Lao-tzu and Chuangtzu. It takes a super-artistic declar-ation that human can feel and recognize the color of colorlessness the sound of sound-lessness and the taste of tastelessness. The thought of arts affected by Taoism is 'ad-vanced age' called the beauty of skillfulness. The view of arts of lao-tzu takes the beauty of cosmos and the nature as a standard. Es-pecially the beauty of inactivity is recognized by the linkage between the beauty and the ugliness. And these things appear in fashion design as a design element such as humor or exaggeration. 3) The beauty of non-dualism It is thought of Buddhism that all evil passions of worry occur form the opposition in dualism. Finally this thought leads to that everything is consistent and truth is only one from the point of view that virtue and vice has on linkage that is 'no virtues no vices' and 'one with two, two, with one, one is not two' A big tendency like this became the root forma-tion of the thought of the oriental arts. 3. Characteristics of the oriental aesthetic sense on the present fashion design 1) The formation of the fashion design on the oriental elements In the picture-incantation which was a representation of an era when the thought of 'cosmic dual forces' dominated the basic polygons of 'a circle square triangle' means both 'one two three' and 'the negative positive mean' of cosmic elements. From this point of view the was of planner cutting in the Orient is dif-ferent from that of the Occidental which is in three-dimensional. The planner polygon type of the cut-pieces comes to have the meaning of the three-dimension when they consist of a suit that has the combination of each cut-piece. This shows the consistency with the principle of cosmos creation of Taoism that one is two two is three and three is every-thing. 2) The coloring and the symbolic represen-tation of the fashion design on the orien-tal elements The sense on the colors in the Orient from the thought of 'the cosmic dual forces and the five elements' is not the experi-enced from the knowledge but contains the consideration of philosophy Five-primary-color representing compass directions Blue(East) Red(South) Yellow(Center) White (West) and Black (North) is called ' the posi-tive' for this five-primary-color secondary-color which comes from the compound of the primary colors is called 'the negative' The thought of 'the cosmic dual forces and the five elements' is also an theory containing the natural order of the cos-mos and this shows the perceptional differ-ence that they are not conceptual but to be recognized and fell directly. A thought of Buddhism which is 'Colors are colorlessness and Clolorlessness are color's proves that. 3) The pattern and symbolic representation of the fashion design on the oriental elements The pattern as a visual style is a figure of symbolic representation which adopt the mental and physical world of human and are the compo-sition of artistic revelation of the human nature and the religous thought of incantation. Es-pecially the symbolic representation of the oriental thought of Confusion. Buddhism and Taoism There are patterns such as plants aminals the oriental four gods and geometry. From the above it's the time toward the 21'th century when the world is constructing one global area and one historical zone. And the exotic mood of the Orient represented in the fashion which doesn't make the common feeling in general does not cease to develop only to express the visual modeling but also adopts the thought religion and the art which are the root of the Orientail and contains inherent willing of modeling.

• 대한원격탐사학회지
• /
• 제36권5_1호
• /
• pp.847-860
• /
• 2020

2-pass DInSAR (Differential Interferometric SAR) 기법을 이용한 DEM 생성 방법은 SAR 영상쌍 간의 정합, 간섭도 생성, 위상 unwrapping, DEM오차 계산, 좌표계 변환 등 복잡한 단계가 필요하다. 이러한 각 단계별 자료처리 정확도는 최종적으로 생성되는 DEM의 성능에 영향을 미치게 된다. 본 연구에서는 TanDEM-X bistatic SAR 영상의 2-pass DInSAR 기법 기반 DEM 생성 방법에 대한 성능 향상을 위한 개선된 방법을 개발하였다. 개발된 DEM 생성 방법은 unwrapped 위상 내의 DEM 오차와 좌표계 변환 시 발생할 수 있는 DEM오차를 현저히 줄일 수 있는 방법이다. 개발된 알고리즘의 성능 분석은 GPS 측량으로부터 생성한 지상기준점(Ground Control Point, GCP)을 이용하여 기존의 방법과 새로 제안된 알고리즘 적용 결과의 수직정확도(Root Mean Square Error, RMSE)를 비교하여 수행하였다. 실제 unwrapped 위상 및 좌표계변환 오차에 대한 보정을 수행하지 않고 생성한 DInSAR 기반 DEM의 고도 오차는 수직정확도는 39.617 m로 관측되었고, 제안한 방법을 통하여 생성한 DEM의 수직정확도는 2.346 m로 향상됨을 확인할 수 있었다. 제안하는 2-pass DInSAR 기법을 통해 reference로 사용한 SRTM 30 m DEM(수직정확도 5.567 m)에 DInSAR로 관측한 SRTM DEM 오차를 보상하여 최종적으로 공간해상도는 약 5배, 수직 정확도는 약 2.4배 향상된 DEM을 생성할 수 있었다. 또한, 제안한 방법을 통하여 생성한 DEM의 공간해상도를 SRTM 30 m DEM과 TanDEM-X 90 m DEM과 일치시키고 수직정확도를 비교한 결과 각각 약 1.7배 및 1.6배 향상되어 제안하는 2-pass DInSAR 기반 DEM 생성 방법으로 보다 정확한 DEM 생성이 가능함을 확인할 수 있었다. 빈번한 형태학적 변화를 갖는 지역에 대한 DEM의 지속적인 업데이트를 위하여 본 연구에서 도출한 방법을 이용한다면 저비용으로 빠른 시간 내에 효과적으로 DEM을 갱신할 수 있을 것이다.

• 한국토양비료학회지
• /
• 제44권2호
• /
• pp.161-167
• /
• 2011

하이부시 블루베리는 근모가 없는 섬유질 뿌리와 천근적 분포 특성으로 인하여 생장과 생육에 대한 토양수분의 영향이 매우 크다. 특히 국내 토양의 토성과 유기물 함량은 미국과 캐나다 같은 주산지와 크게 다르다. 따라서 안정된 생육과 지속적인 생산성을 확보하기 위해서는 토양수분에 대한 연구가 선행되어야 한다. 따라서 본 연구는, 국내 토양조건에서, 북부형 하이부시 블루베리의 토양수분함량에 따른 생장특성을 구명함으로써 블루베리의 안정생육을 위한 적정 관수점과 최적 토양수분함량을 확립하고자 수행하였다. 본 시험에 사용된 토양의 토성은 양토 (Loam)이며, 피트모스를 30% (v/v)혼합 하였다. 토양수분은 -3,-4,-5,-8,-15 그리고 -22 kPa을 관수개시점으로 설정하여 블루베리의 양분흡수, 수체생장 그리고 과실특성을 조사하였다. 엽중 칼리함량은 토양수분포텐셜의 증가와 같은 경향이었으나, 인산과 마그네슘농도 각각 -5, -22 kPa에서 가장 높았다. 수체생장과 수량은 -4~-8 kPa을 정점으로 정규분포패턴을 나타냈으며, -15 kPa 이상에서는 생육이 크게 하락하였다. 줄기경경과 건물중은 -4 kPa에서, 수폭과 과실비대 및 과실생산량은 -5 kPa에서, 수고와 줄기개수 그리고 줄기장력은 -8 kPa에서 가장 높았다. 과실의 품질 중 당함량은 토양수분포텐셜이 증가할수록 높아지는 경향을 나타냈으나, 산함량, 안토시아닌 그리고 총 페놀함량은 차이가 없었다. 따라서 블루베리의 수체생장과 과실생산을 위한 최적의 토양수분포텐셜은 -4~-8 kPa이었으며, 이를 위한 관수 개시점은 -15 kPa 이하로 사료된다.

• Journal of Astronomy and Space Sciences
• /
• 제26권1호
• /
• pp.89-98
• /
• 2009

이 연구에서는 SLR(Satellite Laser Ranging) NP (Normal Point) 데이터를 이용하는 인공위성 정밀궤도 결정 시스템 YLPODS(Yonsei Laser-ranging Precision Orbit Determination System)를 개발하였다. 먼저, 개발된 YLPODS의 성능 검증을 위해서 저궤도 위성인 TOPEX/POSEIDON과 CHAMP의 SLR NP 데이터를 사용한 궤도결정 시험을 수행하였다. JPL에서 배포하는 정밀궤도력을 참값으로 가정하고, 거리측정잔차(range residual)의 RMS(Root Mean Square) 및 결정된 궤도의 반경(radial), 진행(along-track), 교차(cross-track) 방향 오차를 확인하였다. 그리고 거리측정잔차 확인을 통해 검증된 YLPODS의 거리계산 정밀도와 SLR NP 데이터의 높은 거리측정 정밀도를 이용하여, 관측된 값(O)과 계산된 값(C)을 비교하는 방법으로 GPS(Global Positioning System) 데이터를 이용하는 GPS 기반 POD 시스템 결과의 정밀도 검증을 수행하였다. 검증을 위한 GPS 기반 POD 시스템 결과는 YGPODS(Yonsei GPS-based Precision Orbit Determination System)의 TOPEX/POSEIDON위성 POD 결과가 사용되었다. 관측된 값과 계산된 값의 비교(O-C)를 위해서 GPS 기반 POD 시스템 결과로부터 획득된 궤도 정보를 YLPODS의 초기 궤도로 사용하고, 첫 번째 반복 후 얻어진 거리측정잔차를 확인해 보았다. YLPODS의 궤도결정 수행 결과 TOPEX/POSE)DON과 CHAMP 위성 모두 거리측정잔차가 10cm 미만, 각 방향 오차가 1m 수준의 정밀도를 가지는 것을 확인하였다. GPS 기반 POD 시스템 결과에 대한 정밀도 검증 결과 TOPEX/POSEIDON위성의 경우 거리측정잔차가 10cm 미만으로 나오는 것을 확인하였다. YLPODS의 궤도결정 수행 결과에 비추어볼 때 GPS 기반 POD시스템 결과의 각 방향 궤도 정밀도가 1m 수준이 될 것을 예상해볼 수 있고, 실제로 JPL 정밀궤도력과 비교했을 때 1m 수준의 궤도 정밀도를 가지는 것을 확인할 수 있었다. 결과적으로 이 연구를 통해서 개발된 YLPODS는 향후 수행될 과학기술위성 2호와 다목적 실용위성 5호와 같은 SLR 데이터 획득이 가능한 위성의 SLR 기반 POD 및 GPS 기반 POD 결과 검증에 활용될 수 있을 것이다.