• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.729-734
• /
• 2000

Recently, Very Large Scale Integrated (VLSI) circuit & deep-submicron bulk Complementary Metal Oxide Semiconductor(CMOS) devices require gate electrode materials such as metal-silicide, Titanium-silicide for gate oxides. Many previous authors have researched the improvement sub-micron gate oxide quality. However, few have reported on the electrical quality and reliability on the ultra thin gate oxide. In this paper, at first, I recommand a novel shallow trench isolation structure to suppress the corner metal-oxide semiconductor field-effect transistor(MOSFET) inherent to shallow trench isolation for sub 0.1${\mu}{\textrm}{m}$ gate oxide. Different from using normal LOCOS technology deep-submicron CMOS devices using novel Shallow Trench Isolation(STI) technology have a unique"inverse narrow-channel effects"-when the channel width of the devices is scaled down, their threshold voltage is shrunk instead of increased as for the contribution of the channel edge current to the total channel current as the channel width is reduced. Secondly, Titanium silicide process clarified that fluorine contamination caused by the gate sidewall etching inhibits the silicidation reaction and accelerates agglomeration. To overcome these problems, a novel Two-step Deposited silicide(TDS) process has been developed. The key point of this process is the deposition and subsequent removal of titanium before silicidation. Based on the research, It is found that novel STI structure by the SEM, in addition to thermally stable silicide process was achieved. We also obtained the decrease threshold voltage value of the channel edge. resulting in the better improvement of the narrow channel effect. low sheet resistance and stress, and high threshold voltage. Besides, sheet resistance and stress value, rms(root mean square) by AFM were observed. On the electrical characteristics, low leakage current and trap density at the Si/SiO$_2$were confirmed by the high threshold voltage sub 0.1${\mu}{\textrm}{m}$ gate oxide.

• 한국미생물·생명공학회지
• /
• 제18권3호
• /
• pp.251-259
• /
• 1990

생전분 분해력이 강력한 glucoamylase를 생산하는 균주로서 Asp.usamii IAM 2185를 선정하였다. 밀기울배지에서의 효소생산의 최적 initial pH는 6.0-8.0, 최적 배양온도는 25-$30^{\circ}C$, 최적 배양시간은 72시간이고, 밀기울배지에 ammonuim nitrate와 albumin의 첨가는 효소의 생산을 약간 증가시켰다. 황산암모늄분획, CM-cellulose와 DEAE-cellulose column chromatography에 의하여 효소를 정제하였고, 정제효소의 specific activity는 34.3U/mg.protein, 수율은 10.3 이었다.

• 패션비즈니스
• /
• 제1권2호
• /
• pp.1-19
• /
• 1997

This thesis is a reflection of Korean aestheticism and how it has evolved and influenced Korean contemporary fashion throughout the last century. Up to the current, there have been five notable trends of fashion that have been influenced from and have reflected the qualities emblematic of various periods in Korean history. They can be characterized as the era of Missionary fashion, Uniform fashion, Salon fashion, Brand Name Fashion, and finally, fashion from the current era of diversification. The specific characteristics of each fashion era have been analized and illustrated in a comprehensive table. Design characteristics of Korean contemporary fashion are as follows : 1. A point of emphasis is given to facial feature, unconstructive design and ample silhouette and A silhouette, two-piece and pants. Korean style wrap skirt, a smooth curve and layered style. 2. Effect of flatness from material; as methods of quilting, reinforced dual stitching(Kaeki), patchwork, embroidery and goldfoil thread extra, it is turned up that texture of cloth stuff and effects of flatness. 3. Simple color combinations give effects in two different directions For instance, white and a variety of vivid colors, a dull color and bright colors, black, blue. 4. Over-design, diffusion of fashion. Based on the design characteristics described above, the essence of Korea's beauty consciousness can be captured and summarized through the following points: 1. Emotionalism and non-characterism: traditional and simple natural beauty and modernized natural beauty. 2. From authoritism to non-authoritism: traditional and formal personal beauty and casual characteristic beauty. 3. Polaris (antithesis) phenomenon: chastic beauty and ostentatious beauty, simplicity and lavishness, conformity of fashion and originality. Although the beauty consciousness of Korean contemporary fashion is changing from traditional passive metaphor to aesthetic expressionism for the new generation, after all the basic foundation or root of the spiritual beauty of idealism is usually recognized by focusing on the face.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.117-130
• /
• 1989

In this study, an implicit one-dimensional model, DWRM(Dynamic Wave Routing Model) was developed by using the four-point weighted difference method. By applying the developed model to the Keum River, the parameters were calibrated and the model applicability was tested through the comparison between observed and computed water levels. In addition, the effects of the construction of an estuary dam to the flood wave were estimated as a result of the model application. The results of the study can be summarized as follows; 1. The roughness coefficients were evaluated by comparison between observed and computed water level at Jindu, Gyuam and Ganggyeung station in 1985. The Root Mean Squares for water level differences between observed and computed values were 0.10, 0.11, 0. 29m and the differences of peak flood levels were 0.07, 0.02, 0. 07m at each station. Since the evaluated roughness coefficients were within the range of 0.029-0.041 showing the realistic value for the general condition of rivers, it can be concluded that the calibration has been completed. 2. By the application of model using the calibrated roughness coefficients, the R. M. S. for water level differences were 0.16, 0.24, 0. 24m and the differences of peak flood level were 0.17, 0.13,0.08 m at each station. The arrival time of peak flood at each station and the stage-discharge relationship at Gongju station agreed well with the observed values. Therefore, it was concluded that the model could be applied to the Keum River. 3. The model was applied under conditions before and after the construction of the estuary dam. The 50-year frequency flood which had 7, 800m$^3$/sec of peak flood was used as the upstream condition, and the spring tide and the neap tide were used as the downstream condition. As the results of the application, no change of the peak flood level was showed in the upper reaches of 19.2km upstream from the estuary dam. For areas near 9.6km upstream from the estuary dam, the change of the peak flood level under the condition before and after the construction was 0. 2m. However considering the assumptions for the boundary conditions of downstream, the change of peak flood level would be decreased.

• 한국농공학회논문집
• /
• 제62권1호
• /
• pp.39-50
• /
• 2020

The objective of this study was to assess the livestock nonpoint source pollutant impact on water quality in Namgang dam watershed using the HSPF (Hydrological Simulation Program-Fortran) model. The input data for the HSPF model was established using the landcover, digital elevation, and watershed and river maps. In order to apply the pollutant load to the HSPF model, the delivery load of the livestock nonpoint source in the Namgang dam watershed was calculated and used as a point pollutant input data for the HSPF model. The hydrologic and water quality parameters of HSPF model were calibrated and validated using the observed runoff data from 2007 to 2015 at Sancheong station. The R² (Determination Coefficient), RMSE (Root Mean Square Error), NSE (Nash-Sutcliffe efficiency coefficient), and RMAE (Relative Mean Absolute Error) were used to evaluate the model performance. The simulation results for annual mean runoff showed that R² ranged 0.79~0.81, RMSE 1.91~2.73 mm/day, NSE 0.7~0.71 and RMAE 0.37~0.49 mm/day for daily runoff. The simulation results for annual mean BOD for RMSE ranged 0.99~1.13 mg/L and RMAE 0.49~0.55 mg/L, annual mean TN for RMSE ranged 1.65~1.72 mg/L and RMAE 0.55 mg/L, and annual mean TP for RMSE ranged 0.043~0.055 mg/L and RMAE 0.552~0.570 mg/L. As a result of livestock nonpoint pollutant loading simulation for each sub-watersehd using the HSPF model, the BOD ranged 16.6~163 kg/day, TN ranged 27.5~337 kg/day, TP ranged 1.22~14.1 kg/day.

• 한국측량학회지
• /
• 제30권2호
• /
• pp.173-180
• /
• 2012

최근 비약적인 기술발전을 통해 8,000만 화소급 디지털 카메라가 등장했으며, 비측량용 디지털 카메라가 사진 측량 분야에서 다양하게 활용되고 있다. 본 연구에서는 항공사진과 지상기준점을 이용하여 렌즈 캘리브레이션을 수행하였다. 항공사진은 35mm 렌즈가 장착된 CMOS 2,110만 화소급 비측량용 디지털 카메라를 헬리콥터에 설치하여 취득하였고, 지상기준점은 1:1,000 도화원도에서 선점하였다. 그 결과 렌즈에 대한 초점거리, PPA, 방사왜곡계수를 계산할 수 있었다. 또한 렌즈 캘리브레이션 전후에 항공삼각측량을 수행하여 지상기준점의 평균제곱근오차와 최대 잔차를 비교하였으며, 캘리브레이션 후 정확도가 매우 큰 폭으로 향상됨을 알 수 있었다.

• 대한원격탐사학회지
• /
• 제36권4호
• /
• pp.587-607
• /
• 2020

Soil moisture is essential information for meteorological and hydrological analyses. To date, many efforts have been made to achieve the two goals for soil moisture data, i.e., the improvement of accuracy and resolution, which is very challenging. We presented an ensemble downscaling method for quality improvement of gridded soil moisture data in terms of the accuracy and the spatial resolution by the integration of BMA (Bayesian model averaging) and ATPRK (area-to-point regression kriging). In the experiments, the BMA ensemble showed a 22% better accuracy than the data sets from ESA CCI (European Space Agency-Climate Change Initiative), ERA5 (ECMWF Reanalysis 5), and GLDAS (Global Land Data Assimilation System) in terms of RMSE (root mean square error). Also, the ATPRK downscaling could enhance the spatial resolution from 0.25° to 0.05° while preserving the improved accuracy and the spatial pattern of the BMA ensemble, without under- or over-estimation. The quality-improved data sets can contribute to a variety of local and regional applications related to soil moisture, such as agriculture, forest, hydrology, and meteorology. Because the ensemble downscaling method can be applied to the other land surface variables such as temperature, humidity, precipitation, and evapotranspiration, it can be a viable option to complement the accuracy and the spatial resolution of satellite images and numerical models.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.396-401
• /
• 2004

In this paper, a 1MW HAWT(FIL-1000) rotor blade has been designed by BEMT(Blade Element Momentum Theory) with Prandtl's tip loss. Also, a 3-D flow and performance analysis on the FIL-1000 rotor blade has been carried out by using the 3-D Navier-Stokes commercial solver (CFX-5.7) to provide more efficient design techniques to the large-scale HAWT engineers. The rated power and itsapproaching wind velocity at design point (TSR=7.5) are 1MW and 9.99m/s respectively. The rotor diameter is 54.5m and the rotating speed is 26.28rpm. Airfoils such as FFA W-301, DU91-W-250, DU93-W-210, NACA 63418, NACA 63415 consist of the rotor blade from hub to tip. Recent CFX version, 5.7 was adopted to simulate 3-D flow field and to analyze the performance characteristics of the rotor blade. Entire mesh node number is about 730,000 and it is generated by ICEM-CFD to achieve better mesh quality The predicted maximum power occurringat the design tip speed ratio is 931.45kW. Approaching to the root, the inflow angle becomes large, which causesthe blade to be stalled in the region. Therefore, k-$\omega$ SST turbulence model was used to predict the quantitative flow information more accurately. Application of commercial CFD code to optimum blade design and performance analysis was proved to be more effective environment to HAWT blade designers.

• 한국전문물리치료학회지
• /
• 제15권1호
• /
• pp.46-53
• /
• 2008

The aim of the present study was to determine the effect of proprioceptive neuromuscular facilitation (PNF) leg patterns on the muscle activation of neck flexors. Twenty healthy subjects participated in this study. Each subject performed bilateral asymmetrical PNF leg patterns against manual resistance under four conditions: through the full range of motion toward the right side, left side, and the end range in the right side, left side. Electromyographic (EMG) data was collected from the sternocleidomastoid (SCM) muscles as neck flexors. The root mean square (RMS) value of the SCM was measured and normalized from maximal EMG activity of the SCM. The data were analyzed using the paired t-test and repeated analysis of variance (ANOV A) was used to compare the statistical significance. The results of this study are summarized as follows: Firstly, the RMS values of SCM were significantly higher in all four PNF leg patterns than in the resting condition (p<.05). Secondly, there was no significant difference in muscle activation according to the direction of PNF leg patterns (p>.05). Thirdly, there was no significant difference in muscle activation according to the point of range of the motion of leg patterns (p>.05). It is suggested that PNF bilateral asymmetrical leg patterns have a considerable effect on muscle activation of the SCM, regardless of the range of motion and direction of PNF bilateral asymmetrical leg patterns.

• 한국약용작물학회지
• /
• 제3권1호
• /
• pp.50-55
• /
• 1995

체세포배의 생산, 보호 및 저장조건의 구명과 체세포배의 기내분화 및 체세포배 배양식물의 유전변이 여부를 탐색하기 위한 연구를 수행한 결과 MS기본배지 보다 1/2MS배지가 체세포배형성에 가장 효과적이었으며 BA, kinetin처리 모두 $0.1{\sim}1mg/L$에서 체세포배가 발이하여 식물체 형성이 양호하였고 농도가 높을수록 억제되는 경향을 보였으며 shoot의 발근과 신장을 위해서는 IAA처리가 효과적이었다. 1/2MS기본배지에 2.0%의 알진산 용액으로 알진산캡슐을 씌운 체세포배의 기내에서의 식물체형성(전환율)은 $AgNO_3$5mg/l처리가 86%로 가장 앙호하였다 . $5^{\circ}C$에서 3개월 동안 체세포배를 저온저장하여 65%의 발아가 이루어졌으며 저장기간이 길어질수록 발아율이 저하되었다. 체세포배 배앙식물은 RAPD(Randomly Amplified Polymorphic DNA)분석을 통하여 여러 major band 수준에서 DNA polymorphism이 관찰되었다.