• Geomechanics and Engineering
• /
• 제5권5호
• /
• pp.463-483
• /
• 2013

Considering the influences of fluid penetration, casing, excavation processes of wellbore and perforation tunnels, the seepage-deformation finite element model of oil and gas well coupled with perforating technique is established using the tensile strength failure criterion, in which the user-defined subroutine is developed to investigate the dynamic evolvement of the reservoir porosity and permeability. The results show that the increases of perforation angle and decreases of perforation density lead to a higher fracture initiation pressure, while the changes of the perforation diameter and length have no evident influences on the fracture initiation pressure. As for initiation location for the fracture in wellbore, it is on the wellbore face while considering the presence of the casing. By contrast, the fractures firstly initiate on the root of the tunnels without considering casing. Besides, the initial fracture position is also related with the perforation angle. The fracture initiation position is located in the point far away from the wellbore face, when the perforation angle is around $30^{\circ}$; however, when the perforation angle is increased to $45^{\circ}$, a plane fracture is initiated from the wellbore face in the maximum horizontal stress direction; no fractures was found around perforation tunnels, when the angel is close to $90^{\circ}$. The results have been successfully applied in an oilfield, with the error of only 1.1% comparing the fracture initiation pressure simulated with the one from on-site experiment.

• Journal of Korean Neurosurgical Society
• /
• 제59권3호
• /
• pp.282-286
• /
• 2016

Objective : Obturator neuropathy is a rare condition. Many neurosurgeons are unfamiliar with the obturator nerve anatomy. The purpose of this study was to define obturator nerve landmarks around the obturator foramen. Methods : Fourteen cadavers were studied bilaterally to measure the distances from the nerve root to relevant anatomical landmarks near the obturator nerve, including the anterior superior iliac spine (ASIS), the pubic tubercle, the inguinal ligament, the femoral artery, and the adductor longus. Results : The obturator nerve exits the obturator foramen and travels infero-medially between the adductors longus and brevis. The median distances from the obturator nerve exit zone (ONEZ) to the ASIS and pubic tubercle were 114 mm and 30 mm, respectively. The median horizontal and vertical distances between the pubic tubercle and the ONEZ were 17 mm and 27 mm, respectively. The shortest median distance from the ONEZ to the inguinal ligament was 19 mm. The median inguinal ligament lengths from the ASIS and the median pubic tubercle to the shortest point were 103 mm and 24 mm, respectively. The median obturator nerve lengths between the ONEZ and the adductor longus and femoral artery were 41 mm and 28 mm, respectively. Conclusion : The obturator nerve exits the foramen 17 mm and 27 mm on the horizontal and sagittal planes, respectively, from the pubic tubercle below the pectineus muscle. The shallowest area is approximately one-fifth medially from the inguinal ligament. This study will help improve the accuracy of obturator nerve surgeries to better establish therapeutic plans and decrease complications.

• 연구논문집
• /
• 통권23호
• /
• pp.127-140
• /
• 1993

The drive pulley, which is employed for loading and unloading raw materials in a steel mill, is usually manufactured by use of various welding processes. In this study the weldment in the pulley, in which TIG and $CO_2$ welding processes are used, has been analyzed from view point of fracture mechanics. Fracture toughness tests have been performed according to ASTM E813. A servo-hydraulic testing machine (10kN) has been employed. Also the crack propagation tests (Mode I) have been performed with compact tension specimen in compliance with ASTM E647. To predict the critical crack size in the weldment, finite element stress analysis for the drive pulley under real operating conditions have been performed. In addition, the residual stresses at the weldment and in heat-affected zone have been obtained by hole drilling method. The planar critical crack size have been predicted for the drive pulley by considering the stress analysis results and the residual stresses due to welding process. For the drive pulley considered in this study, it has been concluded that the most important factor in determining the critical crack size is the welding residual stress in the transverse direction. Also the effect of stress concentration at the root of the weldment have been noticeable. For the planar crack, the fatigue crack growth life from an initial crack size of 2mm to the critical crack size obtained as in the above have been predicted. The predicted lives were between 55, 900 and 72, 000 cycles depending on the shape of the elliptical crack. The predicted lives were in fairly good agreement for the drive pulley considered in this study.

• Journal of Astronomy and Space Sciences
• /
• 제29권3호
• /
• pp.275-285
• /
• 2012

In this study, we present preliminary results of precise orbit determination (POD) using satellite laser ranging (SLR) observations for International Laser Ranging Service (ILRS) Associate Analysis Center (AAC). Using SLR normal point observations of LAGEOS-1, LAGEOS-2, ETALON-1, and ETALON-2, the NASA/GSFC GEODYN II software are utilized for POD. Weekly-based orbit determination strategy is applied to process SLR observations and the post-fit residuals check, and external orbit comparison are performed for orbit accuracy assessment. The root mean square (RMS) value of differences between observations and computations after final iteration of estimation process is used for post-fit residuals check. The result of ILRS consolidated prediction format (CPF) is used for external orbit comparison. Additionally, we performed the precision analysis of each ILRS station by post-fit residuals. The post-fit residuals results show that the precisions of the orbits of LAGEOS-1 and LAGEOS-2 are 0.9 and 1.3 cm, and those of ETALON-1 and ETALON-2 are 2.5 and 1.9 cm, respectively. The orbit assessment results by ILRS CPF show that the radial accuracies of LAGEOS-1 and LAGEOS-2 are 4.0 cm and 5.3 cm, and the radial accuracies of ETALON-1 and ETALON-2 are 30.7 cm and 7.2 cm. These results of station precision analysis confirm that the result of this study is reasonable to have implications as preliminary results for administrating ILRS AAC.

• 한국컴퓨터정보학회논문지
• /
• 제12권6호
• /
• pp.235-242
• /
• 2007

이동망지원프로토콜은 이동 라우터와 연결된 이동 노드들에게 망의 이동을 투명하게 함으로써, 위치 갱신 신호의 양을 감소시키지만, 최적화되지 않은 경로선택과 다중 헤더를 요하는 문제점이 있다. 본 논문은 중첩된 이동망내에서 망의 이동에 따른 핸드오프의 지역화와 경로 최적화 그리고 특히 핸드오프 신호비용을 감소시키기 위하여 확장된 HMIP 기법을 적용한 경로 최적화 (ROHMIP) 기법을 제시한다. ROHMIP기법에서 이동 망의 이동시 이동 라우터와 연결된 모든 이동망노드들(MNNs)을 대신하여 이동 라우터가 MAP에게 단지 자신의 바인딩 정보 갱신만을 통고한다. 따라서 이동망노드는 통신 노드에 위치갱신을 통보하지 않고 경로 최적화를 유지한다. 성능평가를 통하여 본 논문에서 제안된 기법이 전송지연, 핸드오프로 인한 지연과 신호의 양을 감소시킴을 보였다.

• 혜화의학회지
• /
• 제20권1호
• /
• pp.1-10
• /
• 2011

By studying the portions and layers(分部), left and right, superior and inferior, location of yin and yang, and beginning and end of diseases of skin, which is the core point of the theory of cutaneous region(皮部論) in "Naejing(內經)", in the physiological and pathological perspective, based on opinion of historic memorial doctors, arrived to the conclusion as below. Cutaneous region means not only the distribution of three yin and three yang(三陰三陽) of the surface, but also inside and outside, shallowness and depth, and it is the system which unites meridians, networks, and vessels. It is divided into portions and layers. The origin and beginning of diseases and the rule of favorable pattern and unfavorable pattern can be known through it. The portion of skin is not only the area that meridian vessels belongs to skin, but also the area that activation of twelve meridian vessels are expressed in the surface. The layer of skin is consisted in order of skin-tertiary collateral vessel-collateral vessel-meridian vessel-bone. In "Naejing", there are two preconditions to divide three yin and three yang into yin and yang. The first is standing while looking the south, and second is the quotation "outside is side of yang(外者爲陽 內者爲陰)." According to this preconditions, yang of outside of yang brightness, lesser yang, and greater yang is the whole body, except inside of hand and foot which yin of lesser yin, pericardium, and greater yin. Superior and inferior of the portions and the layers is designated as hand and foot, theological basis of which superior and inferior work in same diagnostic method can be found in the root and the basis(標本) and the origin and the insertion(根結). In conclusion, cutaneous region not only manages layer of the skin, but also it is divided into layers and portions, so it has close relations between meridian vessels and collateral vessels. The in-depth study of cutaneous region and meridians should be progress, in order to practice of diagnosis and acupuncture and moxibustion more.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권1호
• /
• pp.66-70
• /
• 2017

Radioactive materials are used in medicine, non-destructive testing, and nuclear plants. Source localization is especially important during nuclear decommissioning and decontamination because the actual location of the radioactive source within nuclear waste is often unknown. The coded-aperture imaging technique started with space exploration and moved into X-ray and gamma ray imaging, which have imaging process characteristics similar to each other. In this study, we simulated $21{\times}21$ and $37{\times}37$ coded aperture collimators based on a modified uniformly redundant array (MURA) pattern to make a gamma imaging system that can localize a gamma-ray source. We designed a $21{\times}21$ coded aperture collimator that matches our gamma imaging detector and did feasibility experiments with the coded aperture imaging system. We evaluated the performance of each collimator, from 2 mm to 10 mm thicknesses (at 2 mm intervals) using root mean square error (RMSE) and sensitivity in a simulation. In experimental results, the full width half maximum (FWHM) of the point source was $5.09^{\circ}$ at the center and $4.82^{\circ}$ at the location of the source was $9^{\circ}$. We will continue to improve the decoding algorithm and optimize the collimator for high-energy gamma rays emitted from a nuclear power plant.

• 한국환경과학회지
• /
• 제18권9호
• /
• pp.1011-1015
• /
• 2009

The vegetated porous pavement can be installed as an alternative way to replace the traditional pavement, which contributes less to the water circulation system in the urban area. This study aims to an investigation based on the shadow and pressure of the vehicle system, where the turfgrass get grown and the green block get constructed on the grassy parking lot. This study might achieve these conclusions, in the case of use 'green block' makes grass parking lot, plant a kind of 'zenith' and takes sod thickness 40 mm are more efficient for turfgrass growth in the early times. In the case of parking over 8 hours in a day, after 5 weeks turfgrass growth would come into reduce. So over 4 hours parking and after 9 weeks, we need consider to setting up green block in grassy parking lot. The grassy ground would get pressured by the vehicles' load and it would bring into some damage due to the load after 3 weeks. So we should put the grass's growth root point under the designed a top of 'green block' level. When the vehicle amounts and parking density is in a low level, it could be an environmentally friendly product.

• 복식
• /
• 제38권
• /
• pp.213-231
• /
• 1998

The purpose of this study is to find a root from naturalism to contribute the identity of Korean fashion design in the world which has universality and particularity. The beauty of nature has accumulated in our unconscious-ness, influenced to our unconsciousness, and contributed to make the formative sense. Our consciousness influenced by climate, for example, the sense of softness from soft curve which can feel from the sight of Korean mountain, land the sense of comfort and security from round rock formed by weathering, the sense of thick-ness from cotton to endure cold winter etc. has a tendency to thick and act by nature's law. This tendency made naturalism by Korean climate and linked to the sense of natural-istic beauty and became a important part forming the Korean fashion design. In this study, the researcher found Korean climate is a important factor acting in our consciousness, and influenced the formative sense. The concept of climate which is made our formative sense include topography, climate, soil, plant and so on. This influenced a lot to set up a foundation of Korean fashion design. And the naturalism by Korean climate newly created and developed shape, color, material and design. It is our duty to develope design based on naturalism to secure the competitive power against the world in this period of information and this design is getting important as a high value added method put into Korean culture. Therefore, developing Korean design which shapes the beauty of Korean nature and traditional culture will have a important competitive power in the world. Moreover, it will make a new tradition of Korean fashion culture stagnated by internationally universalized western fashion after the modernization. Also, it will be needed to develop a common design which can be agreed not only us but all the world for the request of these days of international. Therefore, this study contributed to find definite ours and found centripetal point to find the direction of Korean's philosophy and ideology. But this approach, we could secure the competitive power in this period of international and information and determine and develope the Korean fashion as a culture base, leading the world.

• 대한공간정보학회지
• /
• 제14권4호통권38호
• /
• pp.11-18
• /
• 2006

본 논문은 항공 LiDAR 데이터의 정확도를 수평과 수직으로 구분하여 현지의 측량기준점을 이용하여 평가하였다. 항공 LiDAR 측량은 좌우 스캔방식에 의한 레이저 포인트를 취득하므로, 미리 측량된 점과 정확히 일치하는 포인트를 획득하기가 어렵다. 따라서 본 연구에서는 현지 측량점 주변에 위치한 점들을 종합적으로 이용하여 비교, 평가를 실시하였다. 수평위치의 정확도는 LiDAR 포인트로부터 각 건물면에 대한 평면방정식을 구성하여 모서리 점에 대한 좌표를 산출하여 현지 측량점과 비교한 결과, 평균오차 19cm, RMSE 21cm로 나타났으며, 16점 중에서 15점이 20cm 이내의 오차를 보였다. 수직위치의 정확도는 총41점에 대해 현지에서 측량한 검사점의 높이값을 이용하여 수직위치를 평가한 결과, 평균오차 10cm, RMSE 14cm로 나타났으며, 총 검사점의 75%가 15cm 이내로 오차를 보였다. 따라서 본 연구 결과를 바탕으로 향후 수치지형도 수정 갱신, 기본지리정보 및 삼차원공간정보 구축 등 LiDAR 데이터의 정확도에 따른 활용범위를 산정할 수 있을 것으로 판단된다.