• 대한방사선기술학회지:방사선기술과학
• /
• 제45권2호
• /
• pp.145-150
• /
• 2022

The main purpose of this work was to restore the blurry chest CT images by applying a blind deconvolution algorithm. In general, image restoration is the procedure of improving the degraded image to get the true or original image. In this regard, we focused on a blind deblurring approach with chest CT imaging by using digital image processing in MATLAB, which the blind deconvolution technique performed without any whole knowledge or information as to the fundamental point spread function (PSF). For our approach, we acquired 30 chest CT images from the public source and applied three type's PSFs for finding the true image and the original PSF. The observed image might be convolved with an isotropic gaussian PSF or motion blurring PSF and the original image. The PSFs are assumed as a black box, hence restoring the image is called blind deconvolution. For the 30 iteration times, we analyzed diverse sizes of the PSF and tried to approximate the true PSF and the original image. For improving the ringing effect, we employed the weighted function by using the sobel filter. The results was compared with the three criteria including mean squared error (MSE), root mean squared error (RMSE) and peak signal-to-noise ratio (PSNR), which all values of the optimal-sized image outperformed those that the other reconstructed two-sized images. Therefore, we improved the blurring chest CT image by using the blind deconvolutin algorithm for optimal approach.

• 한방재활의학과학회지
• /
• 제32권2호
• /
• pp.139-154
• /
• 2022

Objectives This study was conducted to confirm anatomical information near the treatment areas of visceral chuna manual therapy and to secure stability and effectiveness during the treatment. Methods For 50 healthy adult men and women, a total of 13 ultrasound images were taken of the 7 treatment areas which are the representative treatment areas of visceral Chuna manual therapy. Results The treatment area of the bottom of the liver can be palpated around the right side ST19 and CV14. The treatment area of the gallbladder and the common bile duct can be palpated around the right side SP16 and ST20. The treatment area of the cardia and the pylorus can be palpated around the left side KI21, right side ST20, ST21, KI19, KI20, CV12, and CV13. The origin point of the mesentery root can be moved to the left and lower left from CV12 and can be palpated. The treatment area of the ileocecal valve and the cecum can be palpated around the right side SP14. The treatment area for the colic flexure can be palpated around the both side LR13. The treatment support point for the kidneys can be palpated around both side BL51. Conclusions It is thought that if the ultrasound image data from the meridians around the treatment site is used as an auxiliary, it will be more effective in terms of safety and effectiveness during the treatment of visceral Chuna manual therapy.

• 대한두개안면성형외과학회지
• /
• 제24권1호
• /
• pp.18-23
• /
• 2023

Background: When performing reduction of zygomatic arch fractures, locating the inward portion of the fracture can be difficult. Therefore, this study investigated the discrepancy between the locations of the depression on the soft tissue and bone and sought to identify how to determine the inward portion of the fracture on the patient's face. Methods: We conducted a retrospective review of chart with isolated zygomatic arch fractures of type V in the Nam and Jung classification from March 2013 to February 2022. For consistent measurements, a reference point (RP), at the intersection between a vertical line passing through the end point of the root of the ear helix in the patient's side-view photograph and a transverse line passing through the longest horizontal axis of the external meatus opening, was established. We then measured the distance between the RP and the soft tissue depression in a portrait and the bone depression on a computed tomography (CT) scan. The discrepancy between these distances was quantified. Results: Among the patients with isolated zygomatic arch fractures, only those with a fully visible ear on a side-view photograph were included. Twenty-four patients met the inclusion criteria. There were four types of discrepancies in the location of the soft tissue depression compared to the bone depression: type I, forward and upward discrepancy (7.45 and 3.28 mm), type II, backward and upward (4.29 and 4.21 mm), type III, forward and downward (10.06 and 5.15 mm), and type IV, backward and downward (2.61 and 3.27 mm). Conclusion: This study showed that discrepancy between the locations of the depressions on the soft tissue and bone exists in various directions. Therefore, applying the transverse and vertical distances measured from a bone image of the CT scan onto the patient's face at the indicated RP will be helpful for predicting the reduction location.

• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.48.1-48.10
• /
• 2021

Objectives: This study aimed to evaluate the effects on bone repair of different concentrations of mineral trioxide aggregate (MTA) added to AH Plus. Materials and Methods: Bone tissue reactions were evaluated in 30 rats (Rattus norvegicus) after 7 and 30 days. In the AH + MTA10, AH + MTA20, and AH + MTA30 groups, defects in the tibiae were filled with AH Plus with MTA in proportions of 10%, 20% and 30%, respectively; in the MTA-FILL group, MTA Fillapex was used; and in the control group, no sealer was used. The samples were histologically analyzed to assess bone union and maturation. The Kruskal-Wallis and Mann-Whitney tests were performed for multiple pairwise comparisons (p ≤ 0.05). Results: At the 7-day time point, AH + MTA10 was superior to MTA-FILL with respect to bone union, and AH + MTA20 was superior to MTA-FILL with respect to bone maturity (p < 0.05). At the 30-day time point, both the AH + MTA10 and AH + MTA20 experimental sealers were superior not only to MTA-FILL, but also to AH + MTA30 with respect to both parameters (p < 0.05). The results of the AH + MTA10 and AH + MTA20 groups were superior to those of the control group for both parameters and experimental time points (p < 0.05). Conclusions: The results suggest the potential benefit of using a combination of these materials in situations requiring bone repair.

• 한방재활의학과학회지
• /
• 제33권4호
• /
• pp.167-184
• /
• 2023

Objectives This study was designed to assess the effectiveness of ultrasound therapy at the ST11 for regulation of sympathetic hyperactivity. Methods Forty healthy adult subjects were assigned to experimental group and control group. After taking mental stress, ultrasound therapy was applied at the ST11 in experimental group and sham-ultrasound therapy was applied in control group. The evaluation of sympathetic activity was measured by blood pressure, pulse rate, and heart rate variability at 3 times (Time 1: before the stress stimulation, Time 2: after the stress stimulation, Time 3: after the intervention). The primary end point was consisted of normalized (norm) low frequency (LF)/high frequency (HF) ratio, LF (norm), HF (norm). The secondary end point was consisted of systolic blood pressure, diastolic blood pressure, pulse rate, mean heart rate, standard deviation of NN intervals, root mean square of the successive differences, total power (log). Results After the stress stimulation, all subjects showed sympathetic hyperactivity. After the intervention, the experimental group showed lower sympathetic activity than the control group. Comparing the Time 3 and Time 1, the experimental group showed no significantly differences in sympathetic activity while the control group showed higher sympathetic activity in Time 3 than Time 1. Comparing the Time 3 and Time 2, the experimental group showed lower sympathetic activity in Time 3 than Time 2 while the control group showed higher sympathetic activity in Time 3 than Time 2. Conclusions We suggest that the ultrasound therapy at ST11 can decrease sympathetic activity in sympathetic hyperactivity condition.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권1호
• /
• pp.85-92
• /
• 2024

This study develops a Global Positioning System (GPS) Code Multipath Grid Map (CMGM) of each individual domestic reference station from the extracted code multipath of measurement data. Multipath corresponds to signal reflection/refraction caused by obstacles around the receiver antenna, and it is a major source of error that cannot be eliminated by differencing. From the receiver-independent exchange format (RINEX) data for two days, the associated code multipath of a satellite tracking arc is extracted. These code multipath data go through bias correction and interpolation to yield the CMGM with respect to the azimuth and elevation angles. The effect of the CMGM on multipath mitigation is then quantitatively analyzed to improve the Root Mean Square (RMS) of averaged pseudo multipath. Furthermore, the single point positioning (SPP) accuracy is analyzed in terms of the RMS of the horizontal and vertical errors. During two weeks in February 2023, the RMSs of the averaged pseudo multipath for five reference stations decreased by about 40% on average after CMGM application. Also, the SPP accuracies increased by about 7% for horizontal errors and about 10% for vertical errors on average after CMGM application. The overall quantitative analysis indicates that the proposed approach will reduce the convergence time of Differential Global Navigation Satellite System (DGNSS), Real-Time Kinematic (RTK), and Precise Point Positioning (PPP)-RTK correction information in real-time to use measurement data whose code multipath is corrected and mitigated by the CMGM.

• 한국농공학회논문집
• /
• 제66권3호
• /
• pp.1-14
• /
• 2024

Gaining an accurate 3D stream geometry has become feasible with Unmanned Aerial Vehicle (UAV), which is crucial for better understanding stream hydrodynamic processes. The objective of this study was to investigate series of filters to remove stream vegetation and propose the best method for generating Digital Terrain Models (DTMs) using UAV-based point clouds. A stream reach approximately 500 m of the Bokha stream in Icheon city was selected as the study area. Point clouds were obtained in August 1st, 2023, using Phantom 4 multispectral and Zenmuse L1 for Structure from Motion (SfM) and Light Detection And Ranging (LiDAR) respectively. Three vegetation filters, two morphological filters, and six composite filters which combined vegetation and morphological filters were applied in this study. The Mean Absolute Error (MAE) and Root Mean Square Error (RMSE) were used to assess each filters comparing with the two cross-sections measured by leveling survey. The vegetation filters performed better in SfM, especially for short vegetation areas, while the morphological filters demonstrated superior performance on LiDAR, particularly for taller vegetation areas. Overall, the composite filters combining advantages of two types of filters performed better than single filter application. The best method was the combination of Progressive TIN (PTIN) and Color Indicies of Vegetation Extraction (CIVE) for SfM, showing the smallest MAE of 0.169 m. The proposed method in this study can be utilized for constructing DTMs of stream and thus contribute to improving the accuracy of stream hydrodynamic simulations.

• 생명과학회지
• /
• 제18권10호
• /
• pp.1447-1454
• /
• 2008

열처리 조건 및 농도의 차이에 따른 칡 이소플라본인 daidzin과 genistin의 열 안정성에 대하여 조사하였다. Daidzin과 genistin 두 종류의 이소플라본은 처리방법에 상관없이 $140^{\circ}C$이상의 열처리 조건에서 초기 30분 동안 급격히 열 안정성이 떨어지고 그 이후 변화가 적게 나타나 처리 온도가 높을수록 열 안정성의 변화가 큰 것으로 나타났으며, genistin은 daidzin에 비해 농도차이 에 따른 변화의 차이가 크지 않은 것을 알 수 있었다. 또한 열처리 조건에 따른 반응속도는 모두 두 단계로 나타났는데, daidzin과 genistin 모두 2단계보다 1단계에서 빠른 반응속도를 보여 주었고, daidzin은 고농도 일 수록 더 빠른 반응속도를 나타내는 것을 알 수 있었으나, genistin은 농도에 따른 유의차가 적은 것을 알 수 있었다. Daidzin은 1단계의 고농도에서 온도 의존성이 높게 나타났으며 2단계는 농도에 따른 온도 의존성에 유의차가 없었다. Genistin의 경우 1단계에서는 농도에 의한 온도 의존성이 작게 나타났지만 2단계의 저농도에서 온도 의존성이 높은 것을 알 수 있었다. 농도에 따른 변화를 보면 genistin은 고농도와 저농도 모두 1단계에서 온도 의존성이 큰 것으로 나타났으며 반면 daidzin은 고농도, 저농도 모두 2단계에서 온도 의존성이 높은 것을 알 수 있었다. 또한 daidzin과 genistin 모두 $140^{\circ}C$ 이상의 열처리에 의해 이소플라본 glucosidic group이 열에 의해 가수분해되어 daidzein, genistein, glycitein, malonyl-glycitin, acetyl-genistin 등의 중간 유도체 및 aglycone이 생성되며 $140^{\circ}C$, 15 min의 처리 조건에서 대부분 가장 많은 양이 생성되는 것을 알 수 있었고, 농도 변화에 따른 함량의 증가는 유의차가 적은 것을 알 수 있었으나 그 중 malonyl daidzin의 경우 열처리 조건에 의해 따른 생성량의 차이가 큰 것을 알 수 있었다. 열처리 후 농축조건이 농축 후 열처리보다 더 많은 daidzin, genistin 유도체들을 생성시킨 것으로 보아 칡 이소플라본의 각 열처리 조건에 따른 열 안정성은 농축 후 열처리보다 열처리 후 농축이 훨씬 더 열에 안정하다는 것을 알 수 있었다. 따라서 칡 이소플라본의 열안정성은 콩 이소플라본과 유사하게 $140^{\circ}C$ 이상 열처리에 의해 가수분해반응을 보였고, 이소플라본의 중간 유도체들과 aglycone이 $140^{\circ}C$ 이상의 열처리 시 생성되었다. 따라서 칡 이소플라본의 열 안정성은 가열온도와 농도에 의해 큰 영향을 받으며, 콩 이소플라본의 열 안정성과 매우 유사한 특성을 나타내었다.

• 미생물학회지
• /
• 제42권3호
• /
• pp.185-194
• /
• 2006

본 연구는 치근관 감염병소에서 세균을 분리 및 동정하고, 8종의 항생제들에 대한 분리균주들의 감수성을 조사하기 위하여 실시하였다. 세균에 감염된 27개 치아의 괴사된 치근부 치부소직을 바비드 브로치나 페이퍼 포인트로 무균적으로 채취하였다. 치수가 채취된 부위의 바비드 브로치와 페이퍼 포인트를 500 ul의 $1{\times}PBS$ 용액에 담아 잘 혼합하고, 이를 5% 양혈이 포함된 BHI 한천배지(혈액한천배지)에 도말하여 $37^{\circ}C$ 혐기성 배양기에서 2-5일 동안 배양하였다. 혈액한천배지에서 자라난 세균은 16S rRNA 유전자(rDNA) 염기서열결정법을 이용하여 종수준으로 동정하였다. 이들 균주들의 8종 항상제에 대한 감수성은 최소성장억제농도 측정법으로 조사하였다. 본 연구결과, 101개의 세균 집락이 생겼고, Streptococcus spp. (29.7%)와 Actinomyces spp. (21.8%)가 가장 많이 검출되었다. 이들 균주들 중 9균주는 실험 도중 소실되거나 액체배지에 자라지 않아서 항생제 감수성 심험에서는 제외되었다. 각 항생제들에 대한 감수성을 조사한 결과, 분리된 균주들 중 80(87.0%) 균주가 클린다마이신에 감수성을 보였으며, 세프록심 아세틸과 테트라사이클린에 69(75.0%)가, 오그멘틴에 66(71.7%) 균주가, 페니실린 G에 63(68.5%) 균주가, 에리트로마이신에 61(66.3%) 균주가, 아목시실린에 41(44.6%) 균주가 감수성을 보였다. 그러나 시플록사신에는 29(31.5%) 균주만이 감수성을 보였다. 이러한 8종 항생제에 대한 균주들의 감수성 양상은 세균 종의 종류보다는 분리된 숙주에 따라 차이가 있었다. 이러한 결과는 치근관 감염질환의 치료에 항생제가 필요할 경우 항생제 감수성검사를 병행하는 것이 효과적임을 시사한다.

• Restorative Dentistry and Endodontics
• /
• 제35권2호
• /
• pp.88-95
• /
• 2010

이 연구의 목적은 4가지 엔진구동형 NiTi 기구의 근관성형력을 비교하는 것이다. 32개의 투명레진모형을 사용하여 파일의 단면도가 S자 형태이고 "single length"방법으로 근관성형을 시행하는 Mtwo와 crown-down 방법으로 근관성형을 하는 Profile, ProTaper Universal 및 K3로 근관성형을 하였다 (n = 8). 모든 근관은 한사람의 술자가 근단공 크기가 #30이 될 때까지 성형하였다. 기구 사용 전과 후 근관 모양을 디지털 영상을 기록하였고, 컴퓨터 영상 분석 프로그램(Expression Scanner와 Adobe Photoshop CS)으로 평가하였다. 다음과 같은 결론을 얻었다. 근첨으로부터 1, 2, 3, 4, 5, 6, 7 mm 떨어진 부위의 내측과 외측으로 삭제된 레진 양을 측정하였고, 자료는 SPSS법으로 비교 분석하였다. 1. 근관형성 시간은 Mtwo가 84.50초로 가장 짧았으며, 총 작업시간은 K3가 269.37초로 가장 길었다(p < 0.05). 2. 기구의 변형과 파절은 모든 구동형 NiTi 파일에서 발생하지 않았다. 3. 근관 내측 폭경의 변화는 Profile이 1, 2 mm 부위를 제외한 다른 부위에서 가장 적었으며, ProTaper Universal은 모든 부위에서 가장 많았다(p < 0.05). 4. 근관 외측 폭경의 변화는 Mtwo이 1 mm 부위를 제외한 모든 부위에서 가장 적었으며, Profile은 3, 4 mm 부위에서 가장 많았다(p < 0.05). ProTaper Universal와 K3는 1, 2, 6, 7 mm 부위에서 가장 많았다(p < 0.05). 5. 근관중심변위율(centering ratio)은 Profile이 1, 4, 5, 6 mm 부위에서 가장 적었다(p < 0.05). 이상의 결과, 구동성 NiTi 파일을 이용한 만곡 근관의 근관형성은 치경부는 ProTaper와 같은 삭제력이 높은 파일을 사용하는 것이 근관 입구를 효과적으로 넓히고 더 나은 taper를 형성하며, 근단부는 Profile과 같은 근관 중심 변위가 적은 파일을 사용하는 것이 근관형성 시간을 단축하고 근단부의 근관 변형(transportation)을 줄일 수 있다고 판단된다.