• 대한치과교정학회지
• /
• 제46권5호
• /
• pp.290-300
• /
• 2016

Objective: This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Methods: Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. Results: An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. Conclusions: The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization.

• 대한기계학회논문집
• /
• 제6권4호
• /
• pp.367-376
• /
• 1982

Stress concentration mainly occurs near holes and notches. Then local stress is larger than nominal stress. It is necessary that stress concentration phenomena are studied because it can act as a cause of fracture of material. In order to analyze fracture of material including holes, stress concentration factor and stress distribution must be studied more carefully. In this paper the stress concentration and distribution of a slotted plate is examined. Hardened 7:3 brass plate with 4 different slots including a circular hole is used. And ratios of slot length to its root radius are 1, 2, 3, 24, 4. The stress distribution is measured by using strain gages attached to the plate with variable width. And obtained experimental data are adjusted by using calibrated gage factor.

• Journal of Welding and Joining
• /
• 제7권4호
• /
• pp.22-29
• /
• 1989

In this paper weld distortion both in butt and fillet welds by flux cored arc welding has been investigated by changing welding parameters such as heat input and plate thickness, and the weld distortion was expressed as a function of welding parameters adopting the inherent strain theory as proposed by Watanabe and Satoh in 1961. As results of the research it is proposed that transverse shrinkage in root pass butt welds in proportional to ln[(Q/t_-tan.theta.] where Q is heat input(cal/mm), t is plate thickness(mm), and 2.theta. is groove angle(degree), and angular distortion .phi.(radian) in one pass of fillet welds has the following relationship: .phi..var.(Q/ $t^{1.5}$)$^{3}$exp[-(Q/ $t^{1.5}$ )$^{2}$3/] These equations provide us with basic tools to predict the amount of weld distortion in welded structures.

• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.62-84
• /
• 1991

The purpose of this study was to evaluate the cytotoxicity of four root canal sealers(Tubliseal, AH26, Apatite Root Canal Sealer I, Apatite Root Canal Sealer II) in Vitro. The root canal sealers were mixed and filled in molds which were $14{\times}1.25mm$ in diameter, in height to use for cell counting and agar overlary method, and $7{\times}1.25mm$ for millipore filter method and set for 7 days to use for experiment. Silicone and copper plate were used for negative and positive control respectively. Using the culture of L929 fibroblast, total cell number and vital cell number were counted and the ratio of vital cell number to total cell number was calculated on 2 nd, 4 th, 6 th experimental day, and the change of cell membrane permeability was tested by agar overlay method, and the succinate dehydrogenase activity was tested by millipore filter method. The obtained results were as follows. 1. In ail experimental groups, the mitotic activity of fibroblast was reduced when compared with that of negative control group, so ail experimental groups showed cytotoxicity. Apatite Root Canal Sealer I group exhibited mild cytotoxicity, and Tubliseal, AH26, Apatite Root Cenal Sealer II groups exhibited severe cytotoxicity. 2. In the test of the change of cell membrane permeability by agar overlay method, all experimental groups showed cytotoxicity. AH26 group exhibited mild cytotoxicity, and Apatite Root Canal Sealer I group exhibited moderate cytotoxicity, and Tubliseal and Apatite Root Canal Sealer II group exhibited severe cytotoxicity. 3. In the test of SDH activity by millipore filter method, there was no cytotoxicity in Apatite Root Canal Sealer I and Apatite Root Canal Sealer II group, but Tubliseal and AH26 group showed mild cytotoxicity.

• 대한치과교정학회지
• /
• 제31권1호
• /
• pp.97-105
• /
• 2001

교정 치료 시 많은 경우 상악 전치부를 상당량 견인하게 되며 이 때 치아의 이동량과 전방 피질골의 개조량이 동일하게 일어나지 않는다면 치주적인 문제가 발생할 수 있게 된다. 이에 본 연구에서는 상악 전치가 후방 견인될 때 치아의 이동량과 피질골의 개조량의 관계를 알아보기 위하여 성장이 완료된 만 18세 이상의 성인 여자환자 56명을 대상으로 치료 전후의 측모두부 방사선 사진을 계측하였다. 연구대상 56명은 전치의 후방견인 시 경사이동이 주로 일어난 환자(26명 )와 치체 이동이 동반된 환자(30명)로 나누었으며 치료 전후의 측모두부방사선 사진을 true horizontal plane 을 기준으로 하여 중첩하였다. Tip-Group(경사이동된 군)에서는 수평적인 bone remodeling/tooth movement ratio가 1:1.63, Torque-Group(치체 이동이 동반된 군)에서는 1:1.66이었다. 두 군 모두에서 치아의 이동량과 골의 개조량이 동일하지 않았기 때문에 경사 이동 시에는 치근첨이 구개측피질골판에서 멀어지고 순측피질골판에 가까워지며, 치체이동이 동반된 군에서는 치근이 순측피질골판에서는 멀어지고 구개측피질골판에 접근하게 된다. 따라서 상악의 전방 피질골의 두께가 매우 얇은 환자에서는 상악 전치의 후방견인량에 제한이 있게 되며 골격적 부조화가 심한 경우에는 악교정수술을 동반한 치료를 고려하고, 교정적 절충치료가 필요한 경우 술자는 그 치료한계를 명확히 인식해야할 것이다.

• 치과방사선
• /
• 제17권1호
• /
• pp.209-222
• /
• 1987

The author invested the gonial angle, the angle of mandibular and mental canal to the lower border of the mandible, and a relationship of the position of the mandibular canal to the root apex of the posterior teeth and the cortical plate of the lower of the mandible. The materials consisted of 458 pantomograms in male and female aged 11-40 and divided into 5 groups at 5 year intervals and subdivided into 3 groups by gonial angle. The results were as follows; 1. The gonial angle decreased with age, but slight increase occurred over 26-30 years. 2. The average angle of the mandibular canal to the lower border of the mandible was 151.6° and did not correlate with age. 3. The average angle of the mental canal to the lower border of the mandible was 36.9° and didn't correlate with age. 4. The angles of mandibular and mental canal to the lower border of the mandible correlated with gonial angle. 5. The distance from the root apex of the posterior teeth to the upper wall of the mandibular canal was most short at the region of the distal root of the mandibular second molar and increased with age at the region of the mandibular second molar. 6. The distance from the lower wall of the mandibular canal to the cortical plate of the lower border of the mandible was most short at the region of the mesial root of the mandibular first molar and didn't correlate with age.

• 대한기계학회논문집
• /
• 제16권6호
• /
• pp.1150-1155
• /
• 1992

본 연구에서는 제철소 열연공정의 냉각효율 개선을 위한 기초연구로 수행되었 다. 전열면의 초기온도가 900.deg. C이상일 때 층류 냉각방식에 의한 고온강판의 냉각특 성에 영향을 주는 모든 인자를 엄밀히 고려하는 것은 매우 어려운 일이다.따라서 본 연구에서는 노즐과 고온면 사이 거리(L), 유량(Q), 냉각 초기온도 등을 실제 작업 조건에 가깝게 변화시켜 가면서 수냉반경의 변화를 중심으로 전열면의 냉각 특성을 해 석하였다.

• 약학회지
• /
• 제11권3_4호
• /
• pp.22-26
• /
• 1967

From the root of Angelica gigas $N_{AKAI}$ (Umbelliferae), known as "Tang Gui" in Korea, substance A (colorless needle crystal, $C_{14}H_{14}O_{4}$, m.p. $178^{\circ}$) and B (white plate crystal, $C_{19}H_{20}O_{5}$, m.p. $111^{\circ}$) were obtained. Acetylation of "A" gave its monoacetate, white needles, $C_{16}H_{16}O_{5}$. Saponification of "B" with 5% sodium hydroxide produced "A" and senecionic acid. Examination using I.R. and N.M.R. spectra shows that "A" is identical with decursinol and that "B" with decursin. The root also appears to contain five coumarin derivatives and two steroidal compounds.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.64-72
• /
• 1976

This experimental work was carried out to investigate the fatigue bending strength on various shapes and sizes of notches of the domestically manufactured steel plate. The notch types tested were a circular hole, U-and V-notches. The S-N diagram for different notch shapes were discussed in relation to plan bending strength and stress concentration factor of notches .The results of the experiments are summarized as follows : (1) The difference between stress concentration factor and notch factor was greater as the radium of notch root became smaller, and these values approached to an identical value as the radium of notch root increased. (2) It was shown that the plane bending fatigue limit of bar without notch for the hotrolled steel having the tensile strength of 33.1kg/$mm^2$was 17.0kg/$mm^2$. (3) U-and V-notch had a greater effect of stress concentration factor on the endurance limit, but O-hole showed the same effect only for $\o\pm2mm$. (4) For the same radius of notch root, U-notch showed a lower value of fatigue limit compared to V-notch and O-hole.

• Smart Structures and Systems
• /
• 제19권4호
• /
• pp.361-369
• /
• 2017

Electromechanical impedance method as an efficient tool in Structural Health Monitoring (SHM) utilizes the electromechanical impedance of piezoelectric materials which is directly related to the mechanical impedance of the host structure and will be affected by damages. In this paper, electromechanical impedance of piezoelectric patches attached to simply support rectangular plate is determined theoretically and experimentally in order to detect damage. A pairs of piezoelectric wafer active sensor (PWAS) patches are used on top and bottom of an aluminum plate to generate pure bending. The analytical model and experiments are carried out both for undamaged and damaged plates. To validate theoretical models, the electromechanical impedances of PWAS for undamaged and damaged plate using theoretical models are compared with those obtained experimentally. Both theoretical and experimental results demonstrate that by crack generation and intensifying this crack, natural frequency of structure decreases. Finally, in order to evaluate damage severity, damage metrics such as Root Mean Square Deviation (RMSD), Mean Absolute Percentage Deviation (MAPD), and Correlation Coefficient Deviation (CCD) are used based on experimental results. The results show that generation of crack and crack depth increasing can be detectable by CCD.