• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.319-320
• /
• 2006

In this paper, automatic sunvisor system is introduced for driver's safety and convenience. This system has the mechanism which keeps the sun off without obstruction of driver's sight. The mechanism can make the sunvisor move forward or rotate left while remaining inside inner roof. The control system consists of a CPU, a motor driver, light sensors, and the algorithm that can control the movement of sunvisor efficiently. When the light sensors take the sun light, they give the signal to the CPU and the CPU calculates the best position of the sunvisor with the information of driver's eyes height. Then, the CPU gives the signal to motors that can move the sunvisor.

• Journal of the Korean housing association
• /
• v.17 no.1
• /
• pp.97-105
• /
• 2006

The purposes of this study are to find out the current status and features of earth housing, and to explore users' level of satisfaction and needs of improvement about earth housing. Primary findings are as follows: (1) The area of earth housing is generally 25-34 pyong and the construction cost of earth housing is usually 3,000,000-3,400,000 won per pyong. (2) The age of earth house users is generally forties, fifties, and sixties. And their occupation is usually retiree and farmer. The age of earth based pension users is generally twenties and thirties. (3) The construction method of earth housing is usually earth brick structure reinforced with wood structure and earth brick structure(adobe). (4) The finish of outer wall is generally earth brick laying and earth plaster. And the finish of inner wall is usually wall paper and earth plaster. Roof tile and asphalt shingle is frequently observed as roof finish. (5) Users' satisfaction about earth housing is investigated high level. Especially, the satisfaction degrees about faculty of humidity control, stink elimination, prevention from sick house syndrome, support for psychological stabilization and deep sleep are observed very highly. (6) Reduction of construction cost and prevention of crack is investigated as needs of improvement about earth housing.

• Journal of Environmental Science International
• /
• v.25 no.3
• /
• pp.447-456
• /
• 2016

Access to clean and affordable water is one of the fundamental human rights because water is essential to life and a foundation for socioeconomic development of any country in the world. Despite the efforts to secure water supply in Burundi, the amount of water supplied by public utilities does not meet the demand of the population because population keeps increasing with fluctuation of weather conditions. This study selected north Bujumbura that is a sprawling new residential area in the western part of Burundi as a case to investigate the potential of rainwater harvesting in meeting water demand of the country. Based on a long-term average monthly precipitation in the region, the rainwater harvesting potential was assessed as a function of roof sizes, number of households, and runoff coefficients of roof materials. For the entire region of north Bujumbura, the current water supply capacity of the local water company combined with the rainwater harvesting potential resulted in the water surplus of $468,604.1m^3/yr$. Although three communes among them still showed water deficit in dry season, they still got help from rainwater to relieve their water shortage. This suggests that at the regional scale, proper storages and water quality control for harvestable rainwater could contribute to relieving the regional water shortage and allow the population growth.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.407-412
• /
• 2000

In this study, a research for process design in bending of structural frame of AA6061-T6 with rubber pad was conducted. In this process, the conventional lower die made of metal is replaced with a polyurethane pad, resulting in high flexibility during bending. Vulcanized polyurethane rubber with shore A hardness of 60 was used for the pad. Experiments on a newly developed bending machine were carried out by controlling the stroke of the roller and horizontal movement of roller pad lower die. From this, the relation between roller path and geometry of the materials bent was obtained for the process design of producing roof rail part of a passenger car and the experimental result was compared with the target profile. For more accurate process design, it is required to control the roller path interactively. Based on the experience in developing the prototype bending machine, it is construed that a fully automated bending system with rubber pad to produce various light-weight components for automotive body frames can be successfully developed.

• Journal of the Korean housing association
• /
• v.14 no.6
• /
• pp.125-133
• /
• 2003

The purpose of this study is to reveal the characteristics of Kan as a compositional unit in relation with its usage, building base, structural system, and roofing system in Seo Baek Dang and Gwan Ga Jeong. The results are as follows： Seo Baek Dang and Gwan Ga Jeong share a common characteristics： Kan module forms the plan to be 1：1 in shape and enables flexibility in usage and regularity in compositional aspect. In Seo Baek Dang, there are active level differences in base, room floor levels and column heights to achieve intended roof design while minimizing the deviation of module (500 mm) of four sides enclosing the an-madang (inner courtyard) and, in Gwan Ga Jeong, instead of differentiating levels, maximizing the module control (up to 1,560 mm) and lowering the roof slope are found. They are regarded resulting in a rather plane manner. Through a comparative analysis, it is found out that these two houses have a common characteristics of Kan to form a quadrate plan while they have differences both in conceptual and tectonic manner that is 'how to build a house' in similar conditions of region, period and society. In addition, Kan as a module is clarified to have a relative value that regulates both structural and aesthetical aspects.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.4
• /
• pp.70-79
• /
• 2013

These day cities experience serious climatic changes due to environmental load caused by disturbance in the circulation systems of water resources and energy. As technological improvement to respond to various climatic changes and disasters are also requested in the field of construction, inter-disciplinary studies linked to the establishment of sustainable environmental control and energy systems is required in a consilient perspective. This study aims to infer correlations in the impact of environmental changes caused by rooftop greening system on the photovoltaic power generation efficiency through computer simulation in an integrated perspective. By doing so, it seeks to provide basic study for developing a photovoltaic system integrated with building revegetation that is sustainable in environmental and resource aspects. A simulation showed that, in the case of sunshine hours in June, the green surface indicated temperature lowering effects of $9.19^{\circ}C$ on average compared to the non-green surface and temperature was $9.81^{\circ}C$ lower. Due to such greening effects, at the highest sunlight timepoint in June, Pmpp improved 119W and heat loss rate dropped 7.8%.

• Structural Engineering and Mechanics
• /
• v.76 no.6
• /
• pp.823-837
• /
• 2020

In this research, the idea of improving the seismic response of an existing steel structure with use of friction dampers between external walls and the structure is discussed. The main difference of this method with other methods of seismic rehabilitation is that interior spaces of the existing structure remain untouched and new parts including external walls and dampers are added outside of the structure. Three frames having 3, 6 and 9 stories are modeled in SAP2000 software before and after seismic retrofit and responses of the system are investigated under the effect of seven earthquake records. Initially, different ratios of seismic weight of stories are presumed for slip forces of the dampers with a distribution based on given equations. The optimized capacity of dampers is obtained by investigating the average of maximum displacement, acceleration and base shear of the structure caused by earthquakes. For this optimized values, maximum inter-story drifts and acceleration are obtained through numerical models. Results show that in 3, 6 and 9-story frames peak roof displacement decreased up to 80%. Maximum roof acceleration and base shear of the frames also decreased 46, 40 and 32% and 84, 67 and 65%, respectively for three building structures.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.321-323
• /
• 2015

This study will build a prompt response system based on accurate information about the internal structure of cultural heritages, including the roof structure, to improve the ability to contain and respond to the fire of wooden structure for safe preservation of cultural heritages with historical and academic values that are very vulnerable to fire, and develop a training simulation program based on virtual reality by applying the concept of Edutainment for systemized and interesting training of trainees with a response manual.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.251-258
• /
• 2014

In order to set up the basic environmental control systems which the new concept greenhouses have to equip, greenhouse characteristics, environmental management and control systems in domestic glasshouses and plastic houses were investigated and analyzed comparatively. Survey results on the width, length, eaves height, and the number of spans etc. showed that glasshouses were bigger than plastic houses significantly. New concept greenhouses claim to be plastic houses, but it will be reasonable to follow the specifications of the glasshouse. Specifications to be applied to new concept greenhouses were proposed as follows; hot water heating systems, aluminum screens as the thermal curtain, evaporative cooling systems, roof vents on the ridge, circulation fans, $CO_2$ enrichment, hydroponic systems, and automatic irrigation control systems. Environmental measurement systems for the indoor and outdoor temperature, humidity, light, wind speed and indoor $CO_2$ concentration have to be fully equipped. The automatic control system has to be as a complex environmental control system, not a single item control system. Also, for stable dissemination, domestically producing complete greenhouse control system should be made as soon as possible.

• Journal of Conservation Science
• /
• v.24
• /
• pp.13-22
• /
• 2008

The identification of species, hygroscopic property, and ability of ethylene gas absorption of 23 ancient charcoals excavated from wooden coffin burials and roof-tile kilns of Chudong-ri cultural site were investigated. All of the 12 charcoals excavated from wooden coffin burials were broad-leaved trees. Among the total 12 samples, 9 samples were Lepidobalanus and others were Celtis spp.. On the other hand, other 11 charcoals from roof-tile kilns were needle-leaved tree, Pinus spp.(hard pine). The broad-leaved tree charcoals from wooden coffin burials showed a higher moisture absorption capacity than needle-leaved tree charcoals from roof-tile kilns. The ethylene gas absorption was greater in the Lepidobalanus charcoal than that of Celtis spp. and Pinus spp. (hard pine) charcoal. The broad-leaved tree charcoal having high absorption ability of substances was due to a large microporous and specific surface area. Therefore, it was estimated that broad-leaved tree charcoals were filled in order to make favorable condition in tomb. The wood quality of pine is soft and easy to burn because of low specific gravity, as well as high calorific value by resin in wood. We could assume that the pine wood was used as fuel for roof-tile kilns because of easy control of heating and thermal power.