• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.08a
• /
• pp.313-313
• /
• 2008

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.05a
• /
• pp.19.2-19.2
• /
• 2008

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.216-224
• /
• 1999

In the paper we propose two recovery methods by adopting a rollback and/or roll-forward technique (S) to recover TMR failures in a TMR (structured ) system that is the simplest spatial redundancy. This technique is apparently effective to recovering TMR failures primarily caused by transient faults. The proposed policies carry out few reconfigurations at the cost of (minimal) time-overhead needed for those time-redundant schemes. The optimal checkpoint-interval vectors are derived for both methods through the likelihoods of all (possible) states of the system as well as the total execution-time. Consequently the effectiveness of our proposed policies is validated through certain numerical examples and simulations.

• Progress in Superconductivity
• /
• v.14 no.2
• /
• pp.82-86
• /
• 2012

A sensitive eight-channel high-Tc Superconducting Interference Device (SQUID) detection system for magnetic contaminant in a lithium ion battery anode was developed. Finding ultra-small metallic foreign matter is an important issue for a manufacturer because metallic contaminants carry the risk of an internal short. When contamination occurs, the manufacturer of the product suffers a great loss from recalling the tainted product. Metallic particles with outer dimensions smaller than 100 microns cannot be detected using a conventional X-ray imaging system. Therefore, a highly sensitive detection system for small foreign matter is required. We have already developed a detection system based on a single-channel SQUID gradiometer and horizontal magnetization. For practical use, the detection width of the system should be increased to at least 65 mm by employing multiple sensors. In this paper, we present an 8-ch high-Tc SQUID roll-to-roll system for inspecting a lithium-ion battery anode with a width of 65 mm. A special microscopic type of a cryostat was developed upon which eight SQUID gradiometers were mounted. As a result, small iron particles of 35 microns on a real lithium-ion battery anode with a width of 70 mm were successfully detected. This system is practical for the detection of contaminants in a lithium ion battery anode sheet.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.715-718
• /
• 2002

As the modern technology of continuous casting plant is focused on improvement of slab quality, the control system of strand driven roll which has positive effect is investigated in this paper. An irregular distribution of withdrawal force gives rise to horizontal crack in high and middle grade carbon steel. Based on the basic understanding on design concept of high technology company, monitoring the withdrawal force distribution of strand driven roll and analysis of the control system was Performed at continuous casters of POSCO. The control algorithm of withdrawal force distribution for A.C motor vector control, which was derived from above study and had been applied for POSCO Kwangyang 1-4 continuous casting plant, is presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.665-666
• /
• 2011

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.211-218
• /
• 2021

This paper addressed the problems of controlling the coupled pitch-roll motions in a marine vessel exposed to the regular waves in the longitudinal and transversal directions. Stabilization of the pitch and roll motions can be regarded as the essential task to ensure the safety of a ship's navigation. One of the important features in the pitch-roll motions is the resonance phenomena, which result in unexpected large responses in terms of pitch and roll modes in some specific conditions. Besides, owing to its inherent characteristics of coupled combination and nonlinearity of restoring terms, the vessel shows various dynamical behaviors according to the system parameters, especially in the pitch responses. Above all, it can be seen that suppression of pitch rate remains the most significant challenge to overcome for ship maneuvering safety studies. To secure the stable upright condition, a quasi-sliding mode control scheme is employed to reduce the undesirable pitch and roll responses as well as chattering elimination. The Lyapunov theory is adopted to guarantee the closed stability of the pitch-roll system. Numerical simulations demonstrate the effectiveness of the control scheme. Finally, the control goals of state convergences and chattering reduction are effectively realized through the proposed control synthesis.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.139
• /
• pp.10-17
• /
• 2005

Due to emission of vehicles during loading/unloading, ventilation system in Roll-on/Roll-off ship is inevitable; however it is very difficult to predict the ventilation performance before it is finally built in. Although the requirements for the ventilation system include air change rate and maximum allowable concentration of CO in the cargo holds, even prototype tests are hardly able to quantify the ventilation performance. In the present paper, a new method to assess the ventilation performance of Roll-on/Roll-off ship is proposed by using computational fluid dynamics. The air exchange is modeled by introducing multi-species transport of existing air In the holds and new air from the ventilation system. Conservation of multi-species as well as 3D Navier-Stokes equation are solved numerically in time dependent manner. Several cases of different configuration are considered. The results include predicted mass fraction of new air in the holds. It is also presented that CO concentration can be estimated based on the predicted air change performance. Due to the lack of experimental data, the computed results are not verified; however the proposed method can be applied as au assessment tool.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2718-2722
• /
• 2008

The Roll-to-Roll system including continuous flexible thin materials and roller has its wide range of applications especially in the electronic printing industry. The industry is growing rapidly and the printing speed is also improving. However, the printing machine based on web and roller system has it own problem. As the web speed increases, the failure to wet the surface may occur and the air entrains between the liquid and the paper web. Air bubbles may remain attached to the paper web causing defects on product surface. With the development of image processing technique, the air airflow around the web and rolls can be visualized and calculated by PIV method. In our experiment, the simple web and rolls system is used to R2R simulator. The flow field is studied at various web speeds and positions. The result shows that the flow field has complicated structure with turbulent characteristic and the main trend of flow is obtained by taking time average of flow field.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.43-48
• /
• 2018

The hydraulic control valve, used in the CPB (cold-pad-Batch) cold dyeing system, passes through a pressurized material that absorbs the dye. The hydraulic control of the hydraulic control panel shall be driven in a uniform and precisely controlled manner, as it interferes directly with the dyschromatism. In this study, an acceleration test model was employed to verify the durability of the hydraulic control of the hydraulic control panel, which was manufactured by the scenic model, and the pre-roll angle was analyzed before the performance of acceleration test. Based on the change in the amount of deformation of the padder roll the durability of the padder roll was analyzed along with verification of the durability of the skin and the rubber coating in contact with the fabric. Furthermore, the accelerated test method used for hydraulic controlled multi-cell padder rolls was verified.