• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.103.2-103.2
• /
• 2011

비정질 실리콘 태양전지의 효율을 증가하기 위하여 많이 사용되는 방법 중 하나는 입사되는 빛의 산란을 증가하여 태양전지의 광흡수를 증가시키는 방법이다. 이를 위하여 양극전극으로 사용되는 TCO층의 일정한 패턴 처리를 통하여 광산란을 증가시키는 방법이 사용되고 있다. 본 연구에서는 나노 임프린트 리소그래피방법을 사용하여 Ag 나노로드를 증착한 기판을 제조하고 이를 비정질 실리콘 태양전지에 적용하였다. 실험결과, 그림과 같이 높이와 너비가 300nm 정도로 일정한 패턴의 Ag 나노로드를 제조하였다. 또한, 그 위에 증착된 Si 박막의 경우, 나노로드 전체를 감싸는 돔 형태로 성장하였다. 이와 같은 나노로드 위에 substrate n-i-p 구조의 비정질 박막 태양전지를 증착하고 그 특성변화를 분석하고자 하였다.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.4
• /
• pp.338-342
• /
• 1994

The bacterium producing EPA was isolated from the intestines of the marine fishes. The strains were studied for their identification and their culture conditions. The selected strain was gram negative, rod(0.7 $\times$ 2.4 $\mu m$ in size) and motile with a single polar flagellum. This strain was identified as a Pseudomonas sp. on the basis of its morphological, cultural and physiological characteristics. The strain showed a maximum productivity of phospholipid at $20^{\circ}C$ after 48 hours of culture time with an initia1 pH of 7.0 in the PYM-glucose medium. Under these culture conditions, the production of phospholipid was about 0.3 mg/ml and 0.06 mg/mg dry cell weight.

• Macromolecular Research
• /
• v.14 no.2
• /
• pp.214-219
• /
• 2006

Cast Nafion-based composite membranes containing different amounts of organic, nanorod-shaped polyrotaxane were prepared and characterized, with the aim of improving the properties of polymer electrolyte membranes for direct methanol fuel cell applications. Polyrotaxane was prepared using the inclusion-complex reaction between ${\alpha}$-cyclodextrin and poly(ethylene glycol) (PEG) of different molecular weights. The addition of polyrotaxane to Nafion changed the morphology and reduced the crystallinity. The conductivity of the composite membranes increased with increasing polyrotaxane content up to 5 wt%, but then decreased at higher polyrotaxane contents. Well-dispersed, organic polyrotaxane inside the membrane can provide a tortuous path for the transport of methanol, as the methanol permeability depends on the aspect ratio of polyrotaxane, which is controlled by the molecular weight of PEG. All of the Nafion-based, polyrotaxane composite membranes showed a higher selectivity parameter than the commercial Nafion films did.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.65-66
• /
• 2006

[ $TiO_2$ ] single crystalline nanorods are prepared from electrospun fibers which are composed of nanofibrils with an island-in-a-sea morphology. The mechanical pressure produces each fibril into nanorods which are converted to anatase single crystals after calcinations. HRTEM shows that the (001) plane is growing along the longitudinal direction of the rod. In this work, the nanorod electrode provides the efficient photocurrent generation in a quasi-solid state dye-sensitized solar cells (DSSCs) using highly viscous PVDF-HFP based gel electrolytes. The overall converision efficiency of the $TiO_2$ nanorods shows 6.2 % under $100\;mW/cm^2$ (AM 1.5G) illumination.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1409-1411
• /
• 2006

A new rod-like liquid crystalline monomer having divinyl terminal groups was synthesized and polymerized by using thiol-ene UV polymerization technique. High quality thin film with good retardation value was prepared on a rubbed alignment layer without the inert gas purging. The retardation value of the resulting film was controlled by experimental conditions such as spin speed, concentration, and spin time. From the retardation value and thickness measurement, ${\bigtriangleup}n$ was calculated to be 0.169 for the resulting film having thickness of 815.1 nm.

• Applied Microscopy
• /
• v.19 no.2
• /
• pp.17-26
• /
• 1989

The cells of Campylobacter jejuni treated with physical or chemical disinfection agents were comparatively examined by scanning and transmission electron microscopies for their morphological features and internal ultrastructures. The normal cells of C. jejuni, showed typical spiral rod shapes. The ribosomes, nucleoids, and other cellular constituents were observed to be distributed evenly throughout the cytoplasm. The cells treated with heat or UV-light were changed to spherical or irregular shapes and their cell envelopes were destroyed to form ghost cells by liberating their cytoplasmic components. The cells treated with chlorine or monochloramine were also changed into irregular round shapes. The chlorinated cells showed very rough surface structures with many blob-like protrusions, while the surface of the monochloramine-treated cells appeared to be relatively smooth.

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.86-90
• /
• 2006

Two lactic acid bacteria (LAB) with high ${\gamma}$-aminobutyric acid (GABA)-producing capacity were isolated from naturally aged cheese. Examination of the biochemical features using an API kit indicated that the two strains belonged to Lactobacillus. They were gram positive, rod-type bacteria, and fermented arabinose, melezitose, melibiose and xylose, but did not utilize cellobiose or trehalose. 16S rDNA sequencing analysis confirmed that they were Lactobacillus buchneri and Lactobacillus sp. They were accordingly named as Lactobacillus buchneri OPM-1 and Lactobacillus sp. OPM-2, and could produce GABA from MRS broth supplemented with 10 g/L of monosodium glutamate (MSG) at a productivity of 91.7 and 116.7 mg/L/hr, respectively. Cell extracts of L. buchneri OPM-1 and Lactobacillus sp. OPM-2 showed glutamate decarboxylase (GAD) activity, for which the optimum pH and temperature were 5.5 and $30^{\circ}C$, respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.37-39
• /
• 2015

The ships transiting the Northern Sea Route (NSR) have been gradually increased so that the number of ship-ice collision accidents would be increased. The collision between ship and ice floe can lead to serious damage of hulls and decline of ship's maneuverability. In this study, collision tests that a model ship is forced to collide with disk-shaped synthetic ice floes are conducted in a towing tank. The synthetic ice floes made of polypropylene which has similar density with real ice are used. The ice load is measured by a load cell installed on the carriage rod. The ice floe's motion is measured by a motion sensor installed on the synthetic ice floe. The influences of contact conditions such as hull form and ship speed on the ship-ice collision response are investigated and discussed by measured peak force and ice floe's motion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.390-391
• /
• 2007

We have studied improvement of light leakage of twisted nematic liquid crystal display (TN-LCD) in dark state using the hybrid aligned compensation film made of rod-like LC. When the voltage is applied properly to the TN-LCD, the director tilts up but LC director on the substrate don't tilts up due to surface anchoring energy of the LC cell. Accordingly, LC director from surface to middle LC of TN -LCD become hybrid state such as hybrid aligned film. Consequently, in this paper we achieve wide viewing angle performances of TN mode using developed hybrid aligned film which especially decreases light leakage at vertical direction in dark state.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.73.1-73
• /
• 2001

To utilize the uranium resources contained in the spent nuclear fuel generated from the nuclear power plants, the remote handling and dismantling technology is required. The dismantling process of the sport fuel is the most common process involved in the spent fuel recycling, the rod consolidation and the disposal processes. Since the machine used in the dismantling process are located and operated in isolated space, so called a hot cell, the reliability of machines is very important. To enhance the reliability of the process, in this research, the graphical monitoring system is developed for the fuel dismantling process. The graphic model of each machine is composed of many parts and every parts of the graphic model are given their own kinematics. Using the kinematics and simulating the graphic model in the virtual environment, the validity of the conceptual design can be verified before ...