• 제목/요약/키워드: rock physics modeling

검색결과 7건 처리시간 0.017초

Rock physics modeling in sand reservoir through well log analysis, Krishna-Godavari basin, India

  • Singha, Dip Kumar;Chatterjee, Rima
    • Geomechanics and Engineering
    • /
    • 제13권1호
    • /
    • pp.99-117
    • /
    • 2017
  • Rock physics modeling of sandstone reservoir from gas fields of Krishna-Godavari basin represents the link between reservoir parameters and seismic properties. The rock physics diagnostic models such as contact cement, constant cement and friable sand are chosen to characterize reservoir sands of two wells in this basin. Cementation is affected by the grain sorting and cement coating on the surface of the grain. The models show that the reservoir sands in two wells under examination have varying cementation from 2 to more than 6%. Distinct and separate velocity-porosity and elastic moduli-porosity trends are observed for reservoir zones of two wells. A methodology is adopted for generation of Rock Physics Template (RPT) based on fluid replacement modeling for Raghavapuram Shale and Gollapalli Sandstones of Early Cretaceous. The ratio of P-wave velocity to S-wave velocity (Vp/Vs) and P-impedance template, generated for this above formations is able to detect shale, brine sand and gas sand with varying water saturation and porosity from wells in the Endamuru and Suryaraopeta gas fields having same shallow marine depositional characters. This RPT predicted detection of water and gas sands are matched well with conventional neutron-density cross plot analysis.

암석 물리 모델링: 기술 보고 및 적용 사례 (Rock Physics Modeling: Report and a Case Study)

  • 이광훈
    • 자원환경지질
    • /
    • 제49권3호
    • /
    • pp.225-242
    • /
    • 2016
  • 암석 물리(rock physics)는 암석의 물성과 탄성파 자료의 정량적인 연결 고리로서 저류암 특성화와 모니터링 등에 적용되는 중요한 도구이다. 암석 물리를 기반으로 시추공 검층 자료로부터 공극 유체와 구성 성분이 다양한 암석의 성질을 대표하는 유효 탄성 계수(effective elastic constants)를 모델링하여 탄성파 자료에 적용함으로서 탄성파 자료전체에 대한 저류암 분포와 공극 유체를 유추할 수 있다. 본 보고에서는 먼저 Voigt, Reuss, Hashin-Shtrikman의 유효 탄성 계수 한계값과 Gassmann 방정식을 이용한 유체 치환에 대해서 설명한 후에 공극률이 비교적 높은 저류 사암에 널리 적용되는 접촉(contact) 암석 물리 모델들을 소개했다. 그리고 접촉 암석 물리 모델 중에서 분포 깊이가 어느 정도 일정하고 공극률이 비교적 높은 사암에 적합한 것으로 알려진 일정 교결량(constant-cement) 모델을 북해 유전의 검층 자료에 적용하여 암석 물리 견본(rock physics template)을 완성했다. 마지막으로 이 암석 물리 견본과 현장 2D 탄성파 자료의 중합전 역산 결과로부터 이 유전의 저류암과 덮개암, 공극 유체 분포를 예측해 보았다.

암석물리모델링의 개념과 동해-1 가스전에의 적용 (Concept of Rock Physics Modeling and Application to Donghae-1 Gas Field)

  • 허덕기;김영석
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2008년도 공동학술대회
    • /
    • pp.173-178
    • /
    • 2008
  • 본 연구에서는 탄성물성과 저류물성의 관계를 규명하는 암석물리모델링 방법에 대해 소개하고 이를 동해-1 가스전의 저류층에 응용한 결과를 보고하고자 한다. 시추검층데이터를 이용하여 속도(Vp)와 공극률(\phi) 사이의 관계를 저류층 별로 파악하고, 투수율($\kappa$)과 공극률($\phi$)의 관계를 결합하여 Vp와 $\kappa$의 관계에 대한 연구를 수행하였다. Vp-$\phi$모델의 해석 결과 심부 저류층으로 갈수록 상대적으로 속성정도가 증가하고 분급이 불량함을 알 수 있었다. 또한, 위의 결과를 통해 저류층별로 P파 속도로부터 공극률을 정량적으로 예측 할 수 있는 관계식을 제시하였다. Vp-$\kappa$관계식은 시추검층, 코어실험, 박편을 이용한 투수율 예측 시뮬레이션을 통해 획득한 자료를 이용하여 $\kappa-\phi$의 관계식을 산정한 후 Vp-$\phi$관계식과 결합하여 얻을 수 있었고 이 결과 또한 보고하였다. $\kappa-\phi$관계식은 저류층간의 차이가 없어 하나의 모델로 제시하였으나, Vp-$\phi$ 관계식이 달라 저류층별로 각각 다른 Vp-$\kappa$관계식을 얻을 수 있었다. 본 연구에 사용된 암석물리학적 해석방법은 저류층의 특성해석에 있어서 발생될 수 있는 불확실성을 줄일 수 있고, 탄성파 탐사의 결과로부터 저류물성을 정량적이고 신뢰도 높게 판별 할 수 있는 강력한 도구를 제공할 것으로 기대된다.

  • PDF

공극스케일에서의 시뮬레이션을 통한 암석물성의 이해와 예측 (Understanding and predicting physical properties of rocks through pore-scale numerical simulations)

  • 김영석
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2006년도 공동학술대회 논문집
    • /
    • pp.201-206
    • /
    • 2006
  • 지구과학은 지구와 지구시스템을 기술(description)하던 기존의 역할에서 벗어나, 진화하는 지구 시스템 안에서 일어나는 프로세스의 모델링(process modeling), 시뮬레이션(simulation) 그리고 이러한 현상들을 구상화(visualization)하는 방향으로 그 접근 방법이 서서히 그러나 매우 역동적으로 변화하고 있다. 하지만 이러한 모델링 및 시뮬레이션은 현대의 컴퓨터 기술의 발달에도 불구하고 그 수행이 쉽지는 않다. 그 이유로는 지구의 현상들은 그 현상의 기초원인이 되는 물리적 화학적 프로세스들이 비선형적이며, 서로 다른 프로세스들이 상호 연동되어 발생하고, 시간에 따라 변화를 보이기 때문이다. 더구나 이러한 복잡한 프로세스들이 암석의 공극구조라는 매우 복잡한 구조 안에 일어날 때, 그 현상의 모델링 및 시뮬레이션은 그 어려움이 더욱 커지게 된다.따라서 이러한 지구시스템의 여러 가지 프로세스들에 대한 효과적인 모델링 및 시뮬레이션을 위해선 지구의 기본 구성단위인 암석의 구조, 즉 복잡한 공극구조의 이해 및 그 형태를 효과적으로 컴퓨터상에서 수치적으로 기술하는 방법의 개발이 선행되어야 한다. 본 발표에서는 이러한 공극스케일의 모델링을 위한 격자볼츠만 방법, 유한요소법을 이용한 수치방법과 그 결과와, 지구의 여러가지 비선형적이고 시간종속적인 프로세서의 모델링에의 응용가능성에 대한 내용을 제시한다.

  • PDF

Impact of pore fluid heterogeneities on angle-dependent reflectivity in poroelastic layers: A study driven by seismic petrophysics

  • Ahmad, Mubasher;Ahmed, Nisar;Khalid, Perveiz;Badar, Muhammad A.;Akram, Sohail;Hussain, Mureed;Anwar, Muhammad A.;Mahmood, Azhar;Ali, Shahid;Rehman, Anees U.
    • Geomechanics and Engineering
    • /
    • 제17권4호
    • /
    • pp.343-354
    • /
    • 2019
  • The present study demonstrates the application of seismic petrophysics and amplitude versus angle (AVA) forward modeling to identify the reservoir fluids, discriminate their saturation levels and natural gas composition. Two case studies of the Lumshiwal Formation (mainly sandstone) of the Lower Cretaceous age have been studied from the Kohat Sub-basin and the Middle Indus Basin of Pakistan. The conventional angle-dependent reflection amplitudes such as P converted P ($R_{PP}$) and S ($R_{PS}$), S converted S ($R_{SS}$) and P ($R_{SP}$) and newly developed AVA attributes (${\Delta}R_{PP}$, ${\Delta}R_{PS}$, ${\Delta}R_{SS}$ and ${\Delta}R_{SP}$) are analyzed at different gas saturation levels in the reservoir rock. These attributes are generated by taking the differences between the water wet reflection coefficient and the reflection coefficient at unknown gas saturation. Intercept (A) and gradient (B) attributes are also computed and cross-plotted at different gas compositions and gas/water scenarios to define the AVO class of reservoir sands. The numerical simulation reveals that ${\Delta}R_{PP}$, ${\Delta}R_{PS}$, ${\Delta}R_{SS}$ and ${\Delta}R_{SP}$ are good indicators and able to distinguish low and high gas saturation with a high level of confidence as compared to conventional reflection amplitudes such as P-P, P-S, S-S and S-P. In A-B cross-plots, the gas lines move towards the fluid (wet) lines as the proportion of heavier gases increase in the Lumshiwal Sands. Because of the upper contacts with different sedimentary rocks (Shale/Limestone) in both wells, the same reservoir sand exhibits different response similar to AVO classes like class I and class IV. This study will help to analyze gas sands by using amplitude based attributes as direct gas indicators in further gas drilling wells in clastic successions.

물리탐사 기법들의 화학공법 모니터링 적용성 분석 (An Analysis on Applicability of Geophysical Exploration Methods to Monitoring Polymer-flooding)

  • 천세욱;박찬호;구본진;남명진;손정술
    • 지구물리와물리탐사
    • /
    • 제18권3호
    • /
    • pp.143-153
    • /
    • 2015
  • 탄화수소 생산에서 화학공법은 폴리머 용액을 저류층에 주입함으로써 탄화수소의 생산량을 증대시키는 방법이다. 화학공법의 유용성을 파악하기 위해서는 저류층 내 폴리머 용액의 거동 양상을 모니터링하는 것이 매우 중요하다. 저류층 내 폴리머 용액과 유체 변화에 대한 모니터링의 가능성을 확인하기 위해, 저류층을 구성하고 있는 암석 및 유체의 종류, 포화도 등의 매개변수에 따른 탄성파 및 전기비저항 암석물리모델을 구성하고, 폴리머 주입에 따른 탄성파 및 EM 토모그래피의 반응을 계산하였다. 특히 전기비저항 암석물리모델 구성에서는 순수사암, 셰일질 사암, 사암셰일박리층 3가지의 서로 다른 저류층 암석을 고려하였다. 폴리머 용액의 농도는 가장 일반적으로 이용되는 2 wt%로 하고 담수를 이용한 경우와 염수를 이용한 경우로 나누어 분석하였다. 더 나아가, 화학공법에 대한 중성자검층 민감도 분석을 수행하였다. 이 논문에서 다루는 기법들은 탄화수소 저류층뿐만 아니라 지열 저류층 등의 모니터링에 있어서도 중요하게 적용될 것이다.