• Tunnel and Underground Space
• /
• v.34 no.4
• /
• pp.330-354
• /
• 2024

In site characterization of high-level radioactive waste, discontinuity(joint) distribution and rock mass classification, which are key evaluation parameters in the rock engineering field, were evaluated using deep boreholes in the Wonju granite and Chuncheon granite, which belong to Mesozoic Jurassic era. To evaluate joint distribution characteristics, fracture zones and joint surfaces extracted from ATV data were used, and major joint sets were evaluated along with joint frequency according to depth, dip direction, and dip. Both the Wonju and Chuncheon granites that were studied showed a tendency for the frequency of joints to increase linearly with depth, and joints with high angles were relatively widely distributed. In addition, relatively large amounts of weathering tended to occur even in deep depth due to groundwater inflow through high-angle joints. RQD values remained consistently low even at considerable depth. Meanwhile, joint groups with low angles showed different joint characteristics from joint sets with high angles. Rock mass classification was performed based on RMR system, and along with rock mass classification for 50 m intervals where uniaxial compressive strength was performed, continuous rock mass classification according to depth was performed using velocity log data and geostatistical techniques. The Wonju granite exhibited a superior rock mass class compared to the Chuncheon granite. In the 50 m interval and continuous rock mass classification, the shallow part of the Wonju granite showed a higher class than the deep part, and the deep part of the Chuncheon granite showed a higher class than the shallow part.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.5
• /
• pp.693-698
• /
• 2024

As there are various types of discontinuities developing along with various rock types, the orientation and density of each type of discontinuities were measured to analyze the behavior of groundwater within the rock mass. Among the orientations of discontinuities, the strike was measured in azimuth and expressed as a discontinuity trajectory, and the density of discontinuities was quantified as the sum of the lengths of discontinuities developed per unit area. The overall discontinuity trajectory in the study area is predominantly in the northeast direction, the north-south and east-west directions are dominant in the igneous rock distribution area, and the east-west and northeast directions are dominant in the sedimentary rock distribution area. Among the types of discontinuities, they show discontinuity trajectories similar to the northeast direction, which is the dominant orientation of stratum boundaries, stratification, and foliation. The discontinuity density ranges from 0.1 m^-1 to 1,000 m^-1. The density distribution of discontinuities was expressed in the form of discontinuity contour diagrams. As a result, the crushed rock near Demiseam in the southern and southwestern part of the study area, the igneous rock area around Maryeong-myeon, the igneous rock area near Yongdam Dam in the northeast, and the igneous rock area near Unilam and Banilam in the northwest showed the highest density of discontinuities at over 100m^-1., the sedimentary rock area near Maisan Mountain showed relatively low values. It suggests that the results of geophysical exploration and drilling survey data in the existing study area, as well as the geological structure and density and trajectory of discontinuities, may be important factors in the behavior of groundwater in rock mass in the future.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.2
• /
• pp.200-207
• /
• 2016

To add new groundwater standard, 7 candidate materials (copper, zinc, selenium, manganese, iron, chromium, aluminum) were calculated by CROWN (Chemical Ranking Of groundwater pollutaNts). Copper and zinc were selected as groundwater candidates through the process and monitored total 430 samples for 2 years with 113 groundwater sampling sites. In this study, geological distribution characteristics (igneous rock, metamorphic rock, sedimentary rock) of copper and zinc were evaluated and the geological background levels obtained by a cumulative probability distribution and pre-selection methods were compared. In the results, the highest average concentrations of the copper and zinc were observed both in the igneous rock. The detection concentration ranges of copper and zinc in 430 groundwater samples were $0.002{\sim}0.931mg\;L^{-1}$, and $0.002{\sim}32.293mg\;L^{-1}$, respectively. In addition, detection concentration ranges of copper and zinc were $0.002{\sim}0.931mg\;L^{-1}$, $0.002{\sim}32.293mg\;L^{-1}$ in the igneous rock, $0.002{\sim}0.134mg\;L^{-1}$, $0.004{\sim}7.038mg\;L^{-1}$ in the metamorphic rock and $0.002{\sim}0.008mg\;L^{-1}$, $0.003{\sim}3.948mg\;L^{-1}$ in the sedimentary rock, respectively. As a result of the background concentrations with two methods, zinc concentrations with the pre-selected method are comparatively higher than that of the others with the cumulative distribution.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.530-548
• /
• 2022

The site selection process for deep geological disposal of high-level radioactive waste will be conducted in stages, and 103 evaluation parameters related to site selection have been proposed. In the field of rock mechanics and rock engineering, there are 33 evaluation parameters for intact rock, joint and rock mass, and they are applied in the basic and detailed investigation stages. In this report, uniaxial compressive strength, in-situ stress, joint distribution, and rock mass classification were selected as the main evaluation parameters, and among them, uniaxial compressive strength and in situ stress were selected as key evaluation parameters. Statistical techniques or regression analysis were performed for granite in Wonju and Chuncheon to evaluate the distribution range for the selected key evaluation parameters. The average of the uniaxial compressive strength in the Wonju area estimated through the posterior distribution is about 171 MPa, and about 123 MPa in the Chuncheon area. The maximum in situ stress acting in the Wonju area was less than 30 MPa and less than 40 MPa in the Chuncheon area. The direction of the maximum horizontal stress calculated by regression analysis was 101° in Wonju, and in the case of Chuncheon, it was 95°, respectiviely.

• The Journal of Engineering Geology
• /
• v.7 no.1
• /
• pp.53-62
• /
• 1997

Fracture mechanics properties of rock materials can he applied to predict the distribution of natural fractures in rock masses, and also to assess the safety of rock slopes and underground structures. In this study, rock fracture toughness and other fracture rrechanics properties of sorne lithologies showing apparently rock-property-controlled distribution of natural fractures were measured. Propagation behaviors of natural and experirnental fractures were also characterized both qualitatively and quantitatively, in terns of the propagation types and sorne statistical parameters. It was concluded that the application of fracture mechanics theories to the ge6logic materials should be based on the geological background and evidences.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.1
• /
• pp.39-46
• /
• 2016

A high frequency hydraulic rock drill drifter with sleeve valve is developed to use on arm of excavator. In order to ensure optimal working parameters of impact system for the new hydraulic rock drill drifter controlled by sleeve valve, the performance test system is built using the arm and the hydraulic source of excavator. The evaluation indexes are gained through measurement of working pressure, supply oil flow and stress wave. The relations of working parameters to impact system performance are analyzed. The result demonstrates that the maximum impact energy of the drill drifter is 98.34J with impact frequency of 71HZ. Optimal pressure of YZ45 rock drill is 12.8 MPa-13.6MPa, in which the energy efficiency reaches above 58.6%, and feature moment of energy distribution is more than 0.650.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.19-26
• /
• 2006

Andong and Imha reservoir adjoins each other, but turbid water shows too much different when it rains. The characteristics of geological rock in basin and agricultural area around river boundary are pointed out as the major reason of turbid water of Imha reservoir. This study analyzed rock type of topsoil layer using soil map by National Institute of Agricultural Science and Technology (NIAST). Among rock types, sedimentary rock affects on the occurrence of turbid water. In the analysis of sedimentary rock type, the distribution of sedimentary rock of Imha basin shows 1.87 times higher than that of Andong basin. Also, the distribution of sedimentary rock of Imha basin shows higher than that of Andong basin within 1,600m from river channel in according to the buffer zone of river boundary. And Agricultural area of Imha basin shows higher than that of Andong basin in analysis of land cover within 1,600 m from river channel. As this agricultural characteristics of Imha basin, cover management factor of Imha basin represents more higher that that of Andong basin.

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.220-228
• /
• 2002

Thermal flow through jointed rock mass was analyzed by numerical methods. The effect of a single set of joints on the heat conduction was analyzed by one-dimensional model and compared with the analytical solution. When a joint is completely dry, the joint behaves as a thermal break inducing jumps in temperature distribution even at steady state. Therefore when joints are completely dry, individual joint has to be taken into consideration to get a good result. When joints are partially or fully saturated, the thermal conductivity of the joints increases drastically and the jumps in temperature distribution become less severe. Therefore the effect of joint in heat conduction can be well absorbed by continuum anisotropic model whose thermal properties represent overall thermal properties of the intact part and the discontinuities. Since the effect of joints becomes less important as the degree of the saturation increases, the overall thermal response of the rock mass also becomes close to isotropic. Therefore it can be concluded that a great effort has to be made to obtain a precise in-situ thermal properties in order to get a good prediction of the thermal response of a jointed rock mass.

• Geomechanics and Engineering
• /
• v.18 no.1
• /
• pp.11-20
• /
• 2019

The purpose of this study was to propose a new approach for quantifying in situ rock mass damage, which would include a degree-of-damage and the degraded strength of a rock mass, along with its prediction based on real-time Acoustic Emission (AE) observations. The basic approach for quantifying in-situ rock mass damage is to derive the normalized value of measured AE energy with the maximum AE energy, called the degree-of-damage in this study. With regard to estimation of the AE energy, an AE crack source location algorithm of the Wigner-Ville Distribution combined with Biot's wave dispersion model, was applied for more reliable AE crack source localization in a rock mass. In situ AE wave attenuation was also taken into account for AE energy correction in accordance with the propagation distance of an AE wave. To infer the maximum AE energy, fractal theory was used for scale-independent AE energy estimation. In addition, the Weibull model was also applied to determine statistically the AE crack size under a jointed rock mass. Subsequently, the proposed methodology was calibrated using an in situ test carried out in the Underground Research Tunnel at the Korea Atomic Energy Research Institute. This was done under a condition of controlled incremental cyclic loading, which had been performed as part of a preceding study. It was found that the inferred degree-of-damage agreed quite well with the results from the in situ test. The methodology proposed in this study can be regarded as a reasonable approach for quantifying rock mass damage.

• Geomechanics and Engineering
• /
• v.34 no.6
• /
• pp.683-696
• /
• 2023

The destruction and fracture of rock masses are crucial components in engineering and there is an increasing demand for the study of the influence of rock mass heterogeneity on the safety of engineering projects. The numerical manifold method (NMM) has a unified solution format for continuous and discontinuous problems. In most NMM studies, material homogeneity has been assumed and despite this simplification, fracture mechanics remain complex and simulations are inefficient because of the complicated topology updating operations that are needed after crack propagation. These operations become computationally expensive especially in the cases of heterogeneous materials. In this study, a heterogeneous model algorithm based on stochastic theory was developed and introduced into the NMM. A new fracture algorithm was developed to simulate the rupture zone. The algorithm was validated for the examples of the four-point shear beam and semi-circular bend. Results show that the algorithm can efficiently simulate the rupture zone of heterogeneous rock masses. Heterogeneity has a powerful effect on the macroscopic failure characteristics and uniaxial compressive strength of rock masses. The peak strength of homogeneous material (with heterogeneity or standard deviation of 0) is 2.4 times that of heterogeneous material (with heterogeneity of 11.0). Moreover, the local distribution of parameter values can affect the configuration of rupture zones in rock masses. The local distribution also influences the peak value on the stress-strain curve and the residual strength. The post-peak stress-strain curve envelope from 60 random calculations can be used as an estimate of the strength of engineering rock masses.