• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 암반역학위원회 학술세미나 논문집
• /
• pp.103-114
• /
• 2002

Stability of cut-slope is considered to have a deep relationship with rock types since rock has its own engineering and geological characteristic such as shear strength, durability, weathering profile, geological structures. Therefore, analysis of geological and engineering characterisics of rock mass is essential for the evaluation of rock slope stability This paper introduces the statistical data of slope failure cases which was collected from highway slopes constructed in sedimentary rock mainly of shale in Ky ng-sang Basin. Primary failure feature in this area is planar failure along the bedding regardless of slope geometry. Even a disasterous slope failure case due to the thick clay layer between the beddings was reported. Failures and rock fall were reported to ocurred frequently after the completion of cutting due to the weathering, so long-term slope stability should be considered as a important factors in design.

• 터널과지하공간
• /
• 제2권1호
• /
• pp.102-115
• /
• 1992

Blasting operations associated with rock excavation work may have an environmental impact in nearby structures or human beings. With the increase of construction work in urban areas, vibration problems and complaints have also increased. In order to determine the optimum design parameters for safe blast, it is essential to understand blast mechanism, design variables involved in blast-induced damage, and their effects on the blasting results. This paper deals with the characteristics of ground vibrations, air blast and fly rock caused by blast, including the general method of establishing the vibration predictors, and damage criteria suggested by various investigators. The results of field measurements from open pit mine and tunnel construction work are discussed. Basic concepts of how to design blast parameters to control the generation of ground vibrations, air blast and fly rock are presented.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.103-111
• /
• 1994

Recently, rock slope in large scale is often accompanied with the construction of mountain roads and power plants. Rock in nature has a number of discontinuities such as bedding plane, joints, fracture zones and others. In order to improve rock slope stability, it is necessary to research shear properties of rock joint. In this paper shear properties of rock joint were studied by tilting test. Relations between properties of roughness and shear behavior of rock joint are investigated experimentally. The roughness are examined by compared with shear strength. Consequently, it becomes clear that the engineering properties and failure state modes of slope is different by JRC, and the peak friction angle is different by percent of filling.

• Geomechanics and Engineering
• /
• 제17권6호
• /
• pp.597-606
• /
• 2019

Ultrasonic Time-of-Flight Diffraction (TOFD) techniques are useful methods for non-destructive evaluation of fracture characteristics. This study focuses on the reliability and accuracy of ultrasonic diffraction methods to estimate the depth of rock fractures. The study material includes three different rock types; andesite, basalt and ignimbrite. Four different ultrasonic techniques were performed on these intact rocks. Artificial near-surface fracture depths were created in the laboratory by sawing. The reliability and accuracy of each technique was assessed by comparison of the repeated measurements at different path lengths along the rock surface. The standard error associated with the predictive equations is very small and their reliability and accuracy seem to be high enough to be utilized in estimating the depth of rock fractures. The performances of these techniques were re-evaluated after filling the artificial fractures with another material to simulate natural infills.

• 한국어병학회지
• /
• 제29권1호
• /
• pp.7-12
• /
• 2016

In a previous study on the parasites of cultured rock bream (Oplegnathus fasciatus), we reported the discovery of a new species, Ceratomyxa oplegnathus, obtained from the gallbladder. In the present study, we found another Ceratomyxa species, C. sparusaurati, also from the gallbladder of rock bream. The morphological and ultrastructural characteristics of C. sparusaurati were investigated using light and transmission electron microscopy (TEM).

• 터널과지하공간
• /
• 제26권5호
• /
• pp.384-395
• /
• 2016

절리면의 전단거동 특성을 알아보기 위하여 암석종류와 거칠기가 서로 다른 110개의 자연 암석 절리면 시료에 대하여 거칠기 측정시험과 다단계전단시험을 실시하였다. 시험 암석은 석영반암, 석영안산암, 화강암, 편마암의 4가지 종류이고, 절리면은 JRC값에 따라 3가지 그룹으로 분류하였다. 거칠기 측정시험을 통해 절리면의 거칠기 파라미터를 분석하였으며, 다단계전단시험을 통해 암석종류, 절리면 거칠기, 수직응력의 변화가 각종 전단특성에 미치는 영향을 알아보았다. 절리면의 거칠기와 수직응력이 커질수록 최대전단강도와 전단강성은 증가하였고, 거칠기가 작고 수직응력이 커질수록 팽창각은 감소하였다. 절리면의 전단특성은 암석종류와 거의 무관한 것으로 나타나 모암의 강도보다는 거칠기와 수직응력에 더 큰 영향을 받았다. 또한 동일 암석 절리면에 대한 다단계시험과 직접전단시험의 결과를 비교분석함으로써 두 시험법의 특징을 고찰하였으며, 다단계시험으로 구한 팽창각은 시험 전반부의 낮은 수직응력수준에서 얻은 값만 유효한 것으로 나타났다.

• Journal of Radiation Protection and Research
• /
• 제42권1호
• /
• pp.33-41
• /
• 2017

Background: Phosphate rock and its by-product are widely used in various industries to produce phosphoric acid, gypsum, gypsum board, and fertilizer. Owing to its high level of natural radioactive nuclides (e.g., $^{238}U$ and $^{226}Ra$), the radiological safety of workers who work with phosphate rock should be systematically managed. In this study, $^{238}U$, $^{232}Th$, $^{226}Ra$, and $^{40}K$ levels were measured to analyze the transport characteristics of these radionuclides in the production cycle of phosphate rock. Materials and Methods: Energy dispersive X-ray fluorescence and gamma spectrometry were used to determine the activity of $^{238}U$, $^{232}Th$, $^{226}Ra$, and $^{40}K$. To evaluate the extent of secular disequilibrium, the analytical results were compared using statistical methods. Finally, the distribution of radioactivity across different stages of the phosphate rock production cycle was evaluated. Results and Discussion: The concentration ratios of $^{226}Ra$ and $^{238}U$ in phosphate rock were close to 1.0, while those found in gypsum and fertilizer were extremely different, reflecting disequilibrium after the chemical reaction process. The nuclide with the highest activity level in the production cycle of phosphate rock was $^{40}K$, and the median $^{40}K$ activity was $8.972Bq{\cdot}g^{-1}$ and $1.496Bq{\cdot}g^{-1}$, respectively. For the $^{238}U$ series, the activity of $^{238}U$ and $^{226}Ra$ was greatest in phosphate rock, and the distribution of activity values clearly showed the transport characteristics of the radionuclides, both for the byproducts of the decay sequences and for their final products. Conclusion: Although the activity of $^{40}K$ in k-related fertilizer was relatively high, it made a relatively low contribution to the total radiological effect. However, the activity levels of $^{226}Ra$ and $^{238}U$ in phosphate rock were found to be relatively high, near the upper end of the acceptable limits. Therefore, it is necessary to systematically manage the radiological safety of workers engaged in phosphate rock processing.

• 터널과지하공간
• /
• 제34권4호
• /
• pp.330-354
• /
• 2024

고준위방사성폐기물 부지 특성화에서 암반공학분야의 주요 평가인자인 절리 분포와 암반분류에 대해 중생대 쥐라기 화강암체인 원주 화강암과 춘천 화강암의 심부 시추공을 활용하여 평가하였다. 절리 분포 특성을 평가하기 위해 ATV의 자료에서 추출된 균열대와 절리면을 활용하였으며, 심도에 따른 절리 빈도, 경사 방향, 경사각 등과 함께 주요 절리군을 평가하였다. 연구 대상인 원주와 춘천 화강암 모두 심도에 따라 절리 빈도가 선형적으로 증가하는 경향을 보였으며, 고각의 절리가 상대적으로 많이 분포함을 보였다. 또한 고각의 절리를 통한 지하수 유동으로 인해 심부에서도 상대적으로 풍화가 많이 발생한 경향을 보였다. RQD도 심부에서 낮은 수준의 값을 보였다. 한편, 저각의 경사각을 갖는 절리군은 고각의 절리군과는 다른 절리 특성을 보였다. 암반분류는 RMR을 기준으로 수행하였고 일축압축강도가 수행된 50 m 간격에 대한 암반분류와 함께 속도 검층자료, 지구통계기법을 활용한 심도에 따른 연속적 암반분류를 수행하였다. 원주 화강암은 전반적으로 양호한 암반등급을 보였고, 춘천 화강암도 보통 이상의 암반등급을 보였다. 두 화강암에서는 원주 화강암이 보다 높은 암반등급을 보였다. 50 m 간격과 연속적인 암반분류에서 원주 화강암은 천부가 심부에 비해 높은 등급을, 춘천 화강암은 심부가 천부에 비해 높은 등급을 보였다.

• 한국지반신소재학회논문집
• /
• 제16권3호
• /
• pp.51-62
• /
• 2017

본 연구에서는 도심지 토사재해 예비중점관리대상지역 76개중 9개 지역을 연구 지역으로 선정하였다. 연구 지역 은 기반암 특성별로 퇴적암류 3개 지역(경산시, 고흥군, 대구광역시), 화성암류 3개 지역(대전광역시, 세종특별자치시, 원주시), 변성암류 3개 지역(남양주시, 의왕시, 인제군)으로 분류하였으며, 9개 지역을 대상으로 지반정수 산정에 필요한 시험과 수목에 대한 뿌리 점착력, 수목하중을 예측 모형과 현장 조사를 통해 분석하였다. 강우시나리오(강우강도)는 부산 APEC 기후센터(APCC)에서 제공한 확률강우량을 적용하였으며, 9개 지역의 토사재해 위험도 예측은 TRIGRS와 LSMAP을 이용하였다. TRIGRS 예측 결과, 평균적으로 퇴적암류 지역의 위험지역은 30.45%, 화성암류 지역의 위험지역은 41.03%, 변성암류 지역의 위험지역은 45.04%로 검토되었다. 수관 밀도에 따른 뿌리 점착력과 수목하중을 고려한 LSMAP 예측 결과, 퇴적암류 지역의 위험지역은 1.34%, 화성암류 지역의 위험지역은 2.76%, 변성암류 지역의 위험지역은 1.64%로 검토되었다. TRIGRS를 이용한 분석보다 LSMAP을 통한 분석이 비교적 국소적으로 예측 가능한 것으로 검토되었다.

• KSBB Journal
• /
• 제13권5호
• /
• pp.497-501
• /
• 1998

A fungus with high phosphate solubilizing activites was isolated from soil using potato dextrose agar-calcium phosphate medium and identified to Penicillium sp. PS-113, based on the morphological characteristics of conidiophore and conidia; flask shape of phialide, simple branching type of conidiophore, and columnar shape of conidial head, in malt extract agar and potato dextrose agar media. The optimum temperature ad initial pH to solubilize rock phosphate in potato dextrose broth-rock phosphate medium were 30$^{\circ}C$ and pH 8.0, respectively. In these conditions phosphate solubilizing activities of Penicillium sp. PS-113 against four types of insoluble phosphate like tricalcium-phosphate, aluminium phosphate, hydroxyapatite and rock phosphate were quantitatively determined. As results, this fungus highly produced free phosphates to the culture broth with the concentrations of 1,283 ppm against tricalcium-phosphate, 585 ppm against rock phosphate, 528 ppm against aluminium phosphate, and 242 ppm against hydroxyapatite, respectively.