• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.47-54
• /
• 2005

One of the standard procedures of discontinuity survey is the joint set identification from the population of field orientation data. Discontinuity set identification is fundamental to rock engineering tasks such as rock mass classification, discrete element analysis, key block analysis. and discrete fracture network modeling. Conventionally, manual method using contour plot had been widely used for this task, but this method has some short-comings such as yielding subjective identification results, manual operations, and so on. In this study, the method of discontinuity set identification using genetic algorithm was introduced, but slightly modified to handle the orientation data. Finally, based on the genetic algorithm, we developed a FORTRAN program, Genetic Algorithm based Clustering(GAC) and applied it to two different discontinuity data sets. Genetic Algorithm based Clustering(GAC) was proved to be a fast and efficient method for the discontinuity set identification task. In addition, fitness function based on variance showed more efficient performance in finding the optimal number of clusters when compared with Davis - Bouldin index.

• Tunnel and Underground Space
• /
• v.26 no.4
• /
• pp.283-292
• /
• 2016

A computer program code was developed to estimate hydraulic behavior of the 2-D connected pipe network system, and implemented to evaluate the effect of joint aperture on hydraulic parameters of fractured rock masses through numerical experiments. A total of 216 stochastic 2-D DFN(discrete fracture network) blocks of $20m{\times}20m$ were prepared using two joint sets with fixed input parameters of joint orientation, frequency and size distribution. Two different cases of joint aperture variation are considered in this study. The hydraulic parameters were estimated for generated 2-D DFN blocks. The hydraulic anisotropy and the chance for equivalent continuum behavior of the DFN system were found to depend on the variability of joint aperture.

• Tunnel and Underground Space
• /
• v.22 no.1
• /
• pp.43-53
• /
• 2012

Stability of cut-slope, the orientation and dimension of which are gradually changed, has been analyzed by employing the cross-section method capable of comprehensibly considering the lithological, structural and mechanical characteristics of slope rock. Lithological fragility is investigated by inspecting the drilled core logs and BIPS image has been taken to delineate the rock structure. Engineering properties of drilled-core including the joint shear strength have been also measured. Potential failure modes of cut-slope and failure-induced joints are identified by performing the stereographic projection analysis. Traces of potential failure-induced joints are drawn on the cross-section which depicts the excavated geometry of cut-slope. Considering the distribution of potential plane failure-induced joint traces blocks of plane failure mode are hypothetically formed. The stabilities and required reinforcements of plane failure blocks located at the different excavation depth have been calculated to confirm the applicability of the cross-section method for the optimum cut-slope design.

• Journal of the Korean association of regional geographers
• /
• v.18 no.2
• /
• pp.129-140
• /
• 2012

In order to examine geomorphic characteristics such as form and retreat process of waterfalls in Jeju Island, 26 waterfalls were classified based upon materials forming a fall face. The waterfalls could be categorized into three types such as single unit, multiple units and basal soft-rock based upon the number and type of a lava flow. A block fall, composed of a pile of large blocks, could be added to the typology of waterfalls in Jeju Island. While the single unit fall is distributed in a region of trachyte or trachyandecite, the multiple units fall and basal soft-rock fall are largely developed in a region of basalt or trachybasalt. A retreat process of the single unit fall is an inclination or a replacement, but the basal soft-rock fall shows a parallel retreat. The multiple units fall exhibits three types of a retreat process according to the physical properties of a lava flow. The fall face is generally vertical due to well-developed vertical joints of a lava flow.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.185-191
• /
• 1991

The chemical composition and characteristics of the source rock collected from Dolgorae-1 well in Korea continental shelf block VI( $35^{\circ}$ 18'N.L., $130^{\circ}$ 28'E) have been investigated. An oil show analyzer(OSA) has been used to determine the contents of gas, oil and total organic carbon(TOC). The average TOC value for the sample is found to be 0.59%. The OSA has also provided hydrogen index and $T_{max}$, the maximum temperature which generate maximum hydrocarbons from kerogen. From a $T_{max}$-hydrogen index diagram the type of organic matter in the source rock was estimated to be type III kerogen. The content of bitumen and its molecular weight have been determined by means of extraction method and gel permeation chromatograph, respectively. The physicochemical properties has been studied using X-ray diffraction spectrometer, IR spectrometer and thermogravimetric method. On the basis of the results obtained in the present work, the samples collected from Dolgorae-1 well are evaluated to be poor source rocks.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.1
• /
• pp.51-65
• /
• 2007

The purpose of this study is the development and application of a high resolution ultrasonic wave imaging system to detect discontinuity plane in lab-scale rock models. This technique is based on received time series which capture the multiple reflections at interface. This study includes the fundamental aspects of ultrasonic wave propagation in rock mass, the selection of the optimal ultrasonic wave transducer, data gathering, a signal processing, imaging methods, and experiments. Experiments are carried out by the horizontal movement and rotation devices. Experimental studies show the discontinuity is well detected by the horizontal movement and rotation devices under water. Furthermore, the discontinuity and the cavity on the plaster block are identified by the rotation device. This study suggests that the new method may be an economical and effective tool for the detection of the discontinuity on rock mass.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.3
• /
• pp.65-81
• /
• 2011

The landforms based on granite and basalt in Gosung, Gangwon province were analysed. Some part of this area experienced volcanic activities while most of the area was experiencing erosion of weathered mantle(saprolites) of mesoic granites during cenozoic period. Two different lithologies affect the mode of landscape evolution. The basalt covers the mountain tops as a 'cap rock' with flat surfaces. It shows relatively fresh rock surface with cliff or steep slops at the boundary with weathered granite. The blocks detached from the cliff accumulated at the foot of the cliff(talus) or moved and filled the valley(block streams). These debris slopes cover the deeply weathered granites. In the case of Oeum Mt. and Duibaekjae, the number of point of origin of the basalt flow is not clear. The orientation of blocks from block stream coincides with slope aspects and it can be assumed that the bolcks were moved by solifluction. The landscape change of the block streams are dominated by removal of weathered material from beneath of the valley rather than removal of bedrock blocks themselves.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.2
• /
• pp.80-87
• /
• 1998

Since groundwater flow paths have one of the major roles to transport the radioactive nuclides from the radioactive waste repository to the biosphere, the discrete fracture network model is used for the rock block scale flow instead of the porous continuum model. This study aims to construct a three dimensional discrete fracture network to interpret the groundwater flow system in the study site. The modeling work includes the determination of the probabilistic distribution function from the fracture geometric and hydraulic parameters, three dimensional fracture modeling and model calibration. The results of the constant pressure tests performed in a fixed interval length at boreholes indicate that the flow dimension around boreholes shows mainly radial to spherical flow pattern. The fracture transmissivity value calculated by Cubic law is 6.12${\times}$10$\^$-7/ ㎡/sec with lognormal distribution. The conductive fracture intensity estimated by FracMan code is 1.73. Based on this intensity, the total number of conductive fractures are obtained as 3,080 in the rock block of 100 m${\times}$100 m${\times}$100 m.

• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.427-438
• /
• 2023

We carried out a geological survey to classify the types of mass movement in Danyang Geopark (where various rock types are distributed) and analyzed the mechanical and hydraulic characteristics of landslide materials using a series of laboratory tests. Debris flows occurred in areas of limestone/marble, shale, and porphyroblastic gneiss, and limestone/marble landslides were distinguished from the others through the presence of karren topography. Soil tests showed that soil derived from weathered gneiss, which has a higher proportion of coarse grains, has a higher friction angle, lower cohesion, and larger hydraulic conductivity than soils from areas of limestone/marble, and shale. Rock failure mass movements occurred in areas of phyllite, sandstone, and conglomerate and were subdivided into plane failure, block-fall, and boulder-fall types in areas of phyllite, sandstone, and conglomerate, respectively. The shear strength of phyllite is much lower than that of the other types of rock, which have similar rock quality. The slake durability index of the conglomerate is similar to that of the other rock types, which have similar degrees of weathering, but differential weathering of the matrix and clasts was clearly observed when comparing the samples before and after the test. This study can help establish appropriate reinforcement and disaster prevention measures, which depend on the type of mass movement expected given the geological characteristics of an area.

• Journal of the Korean earth science society
• /
• v.31 no.7
• /
• pp.681-690
• /
• 2010

Inversion result of geophysical data given as a block type was geostatistically simulated with borehole observation given as a point type and was applied to the rock classifying map. The geophysical data generally involved secondary information for the target material and were obtained for overall region. In contrast, borehole data provided direct information for the target material, but tended to be effective only for a narrow range of region and were dealt as a point type. Integrated simulation or kriging interpolation of these two different kinds of information required the covariance for point-point, point-block and block-block. Using the Bssim module included in SGeMS software, integrated result of geophysical data and borehole data were obtained. The results were then compared with the method of geostatistical inversion proposed by authors. Downscaling method used in this study showed relatively more flexible than the geostatistical inversion.