• 한국과학예술포럼
• /
• 제20권
• /
• pp.307-314
• /
• 2015

Tele-Gesture is a tangible user interface(TUI) device that allows a user to physically point to a 3D object in real life and have their gestures play back by a robotic finger that can point to the same object, either at the same time, or at another point in time. To understand the extent of the gestures as new way of digital collaborative communication, collaboration situation and types were experimented as TUI implementations. The design prototype reveals that there is a rich non-verbal component of communication in the form of gesture-clusters and body movements that happen in an digital communication. This result of analysis can contribute to compile relevant contributions to the fields of communication, human behavior, and interaction with high technology through an interpretive social experience.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.120-131
• /
• 2004

In this paper, we propose the method of a motion planning generation in which the movement of the 3-link leg subsystem is constrained to a slider-link and a singular posture can be easily avoided. The proposed method is the jumping control moving in vertical direction which mimics a cat's behavior. That is, it is jumping toward wall and kicking it to get a higher-place. Considering the movement from the point of constraint mechanical system, the robotic system which realizes the motion changes its configuration according to the position and it has several phases such as; ⅰ) an one-leg phase, ⅱ) in an air-phase. In other words, the system is under nonholonomic constraint due to the reservation of its momentum. Especially, in an air-phase, we will use a control method using state transformation and linearization in order to control the landing posture. Also, an iterative learning control algorithm is applied in order to improve the robustness of the control. The simulation results for jumping control will illustrate the effectiveness of the proposed control method.

• Smart Structures and Systems
• /
• 제18권4호
• /
• pp.663-682
• /
• 2016

Continuum manipulators as a kind of mechanical arms are useful tools in special robotic applications. In medical applications, like colonoscopy, a maneuverable thin and flexible manipulator is required. This research is focused on developing a basic module for such an application using shape memory alloys (SMA). In the structure of the module three wires of SMA are uniformly distributed and attached to the circumference of a flexible tube. By activating wires, individually or together, different rotation regimes are provided. SMA model is used based on Brinson work. The SMA model is combined to model of flexible tube to provide a composite model of the module. Simulating the model in Matlab provided a platform to be used to develop controller. Complex and nonlinear behavior of SMA make the control problem hard especially when a few SMA actuators are active simultaneously. In this paper, position control of the two degree of freedom module is under focus. An experimental control strategy is developed to regulate a desired position in the module. The simulation results present a reasonable performance of the controller. Moreover, the results are verified through experiments and show that the continuum module of this paper would be used in real modular manipulators.

• Smart Structures and Systems
• /
• 제13권4호
• /
• pp.711-730
• /
• 2014

In this paper the system dynamic influences in actuators with variable stiffness as contemporary used in robotics for safety and efficiency reasons are investigated. Therefore, different configurations of serial and parallel elasticities are modeled by dynamic equations and linearized transfer functions. The latter ones are used to identify the characteristic behavior of the different systems and to study the effect of the different elasticities. As such actuation concepts are often used to reach energy-efficient operation, a power consumption analysis of the configurations is performed. From the comparison of this with the system dynamics, strategies to select and control stiffness are derived. Those are based on matching the natural frequencies or antiresonance modes of the actuation system to the frequency of the trajectory. Results show that exclusive serial and parallel elasticity can minimize power consumption when tuning the system to the natural frequencies. Antiresonance modes are an additional possibility for stiffness control in the series elastic setup. Configurations combining both types of elasticities do not provide further advantages regarding power reduction but an input parallel elasticity might enable for more versatile stiffness selection. Yet, design and control effort increase in such solutions. Topologies incorporating output parallel elasticity showed not to be beneficial in the chosen example but might do so in specific applications.

• 로봇학회논문지
• /
• 제11권4호
• /
• pp.193-204
• /
• 2016

This paper presents an anthropomorphic finger prosthesis for amputees whose proximal phalanx is mutilated. The finger prosthesis to be proposed is able to make the amputees to perform the natural motion such as flexion/extension as well as self-adaptive grasping motion as if normal human finger does. The mechanism of finger prosthesis with three degrees-of-freedom (DOFs) consists of two five-bar and one four-bar linkages. Two passive components composed of torsional spring and mechanical stopper and only one active joint are employed in order to realize an underactuation. Each passive component is installed into the five-bar linkage. In order to activate the finger prosthesis, it is required for the user to flex and extend the remaining proximal phalanx on the metacarpophalangeal (MCP) joint, not an electric motor. Thus the finger prosthesis conducts not only the natural motion according to his/her intention but also the grasping motion through the deformation of springs by the object for human finger-like behavior. In order to reveal the operation principle of the proposed mechanism, kinematic analysis is performed for the linkage design. Finally both simulations and experiments are conducted in order to reveal the design feasibility of the proposed finger mechanism.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.593-608
• /
• 2015

In many of the industrialized countries an increasing amount of infrastructure is ageing. This has become specifically critical to bridges which are a major asset with respect to keeping an economy alive. Life of this infrastructure is scattering but often little quantifiable information is known with respect to its damage condition. This article describes how a damage tolerance approach used in aviation today may even be applied to civil infrastructure in the sense that operational life can be applied in the context of modern life cycle management. This can be applied for steel structures as a complete process where much of the damage accumulation behavior is known and may even be adopted to concrete structures in principle, where much of the missing knowledge in damage accumulation has to be substituted by enhanced inspection. This enhanced and continuous inspection can be achieved through robotic systems in a first approach as well as built in sensors in the sense of structural health monitoring (SHM).

• Structural Engineering and Mechanics
• /
• 제62권2호
• /
• pp.247-258
• /
• 2017

Beam-like structures such as bridge, high building and tower, pipes, flexible connecting rods and some robotic manipulators are often excited by support motions. These structures are important in machines and structures. So, this study proposes an analytic method to accurately predict the dynamic behaviors of the structures during support motions or an earthquake. Using Timoshenko beam theory which is valid even for non-slender beams and for high-frequency responses, the analytic responses of fixed-fixed beams subjected to a real seismic motions at supports are illustrated to show the principled approach to the proposed method. The responses of a slender beam obtained by using Timoshenko beam theory are compared with the solutions based on Euler-Bernoulli beam theory to validate the correctness of the proposed method. The dynamic analysis for the fixed-fixed beam subjected to support motions gives useful information to develop an understanding of the structural behavior of the beam. The bending moment and the shear force of a slender beam are governed by dynamic components while those of a stocky beam are governed by static components. Especially, the maximal magnitudes of the bending moment and the shear force of the thick beam are proportional to the difference of support displacements and they are influenced by the seismic wave velocity.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.167-169
• /
• 2011

Construction Automation as a way to solve the problems of lack of skilled labor by decrease in construction population productivity and quality decrease. We are on the way to develop a construction automation system adequate for domestic circumstances in Korea; it is called RCA(Robotic-crane based Construction Automation) system. Climbing hydraulic robot system is a part of RCA system and makes Construction Factory(CF) climb next floor. The controller can control movement needs to be developed for CF safety. Synchronous control the actual field was applied to the controller logic and synchronous control of the process through which the safety has been verified. The purpose of this study that control of climbing hydraulic robot system behavior on real-time, and to improve safety for overall construction automation system through synchronous motion controller.

• 감성과학
• /
• 제24권3호
• /
• pp.115-124
• /
• 2021

Non-verbal communication is important in human interaction. It provides a layer of information that complements the message being transmitted. This type of information is not limited to human speakers. In human-robot communication, increasing the animacy of the robotic agent-by using non-verbal cues-can aid the expression of abstract concepts such as emotions. Considering the physical limitations of artificial agents, robots can use light and movement to express equivalent emotional feedback. This study analyzes the effects of LED and motion animation of a spherical robot on the emotion being expressed by the robot. A within-subjects experiment was conducted at the University of Tsukuba where participants were asked to rate 28 video samples of a robot interacting with a person. The robot displayed different motions with and without light animations. The results indicated that adding LED animations changes the emotional impression of the robot for valence, arousal, and dominance dimensions. Furthermore, people associated various situations according to the robot's behavior. These stimuli can be used to modulate the intensity of the emotion being expressed and enhance the interaction experience. This paper facilitates the possibility of designing more affective robots in the future, using simple feedback.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3873-3879
• /
• 2010

서비스 로봇은 사람이 생활하는 환경에서 동작한다. 이런 환경에서는 일반적인 휠베이스 모빌러티(Mobility) 방식의 이동로봇은 동적인 장애물과 정적인 장애물에 둘러싸여 있으므로 로봇의 움직임에 있어 자유로운 주행에 제약을 받게 된다. 이것은 소위 비홀로노믹(Non-Holonomic) 시스템 특성으로 주행 중인 이동로봇은 장애물을 만나면 별도의 조향장치를 사용하거나 차동 휠 구조 로봇의 회전 과정을 수행한 후 이동하고자 하는 방향으로 진행할 수 있다. 이런 장애물을 신속하게 회피하려면 홀로노믹(Holonomic) 시스템 특성이 필요하다. 홀로노믹 시스템은 별다른 회전과정 없이 단순히 좌우로 이동만 하면 된다. 이러한 특성으로 민첩하게 주행할 수 있고 좁은 공간에서 비홀로노믹 로봇보다 효율적이고 자유로운 주행이 가능하다. 그러므로 본 논문에서는 세 개의 옴니휠(Omni-wheels)을 사용한 홀로노믹 이동로봇 시스템을 개발한다. 세 개의 옴니휠을 사용한 이동로봇의 동역학과 모터 비선형 운동방정식을 고려한 정밀한 비선형 동역학 모델을 유도하여 제시한다. 유도된 식을 통해 각각의 모터 속도를 계산하고. 기본 속도제어기로는 PID방식을 사용한다. 그런데, 옴니휠을 이용한 홀로노믹 이동로봇의 추적제어는 정확한 방위각 센싱 데이터와 기준값(Reference Value)을 필요로 한다. 방위각 센싱은 부정확성과 불확실성(Uncertainty)을 갖는다. 부정확성은 센서 시스템의 노이즈와 얼라이어싱(Aliasing)으로 인하여 발생하고, 불확실성은 모바일 로봇의 왜란(Disturbance)과 미끄러짐(Slip)으로 발생한다. 본 논문에서는 퍼지 논리 추론에 의한 퍼지 방위각 추정기(Estimator)를 개발하여 방위각 제어의 새로운 개념을 제시한다. 끝으로, 퍼지 방위각 추정을 이용한 세 개의 전 방향 바퀴 구조의 이동로봇이 실시간으로 제어되는 실험을 통하여 이동로봇 시스템의 성능을 분석한다.