• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.137.2-137
• /
• 2001

We have been developed an intelligent mobile robot with an artificial olfactory function to recognize odours and to track odour source location. This mobile robot also has been installed an engine for speech recognition and synthesis, and is controlled by wireless communication. An artificial olfactory system based on array of 7 gas sensors has been installed in the mobile robot for odour recognition, and 11 gas sensors also are located in the bottom of robot to track odour sources. 3 optical sensors are also included in the intelligent mobile robot, which is driven by 2 D.C. motors, for clash avoidance in a way of direction toward an odour source. Throughout the experimental trails, it is confirmed that the intelligent mobile robot is capable of not only the odour recognition using artificial neural network algorithm, but also the tracking odour source using the step-by-step approach method ...

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.504-510
• /
• 1991

SAMSUNG Electronics has developed a SCAR.A robot system, SM3, which is applicable to several assembly, inspection, and adjustment tasks. This robot system drives by AC servo motors has attained a .theta.1 and .theta.2 axis maximum composite speed of 5.4 m/sec, a repeatability of .+-.05 mm, and a cycle time of 1.2 sea. The robot controller based on three 8086 and one 8087 processors consists of the main controller, the joint position controller, and the motor controller. The robot controller has plentiful self-diagnosis and control capabilities, and can be interfaced to other external device. The robot language FARAL Is designed such that every task is easily programmed. In this paper, the main features of the body, controller, and FARAL of SM3 will be described. In particular, the control method designed for a stable and fast robot motion will be explained. Finally, the future development will be addressed.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.686-691
• /
• 2001

In this paper, the pneumatic service robot with a hybrid type is developed. A pneumatic has the advantage of good compliance, high payload-to-weight and payload-to-volume ratios, high speed and force capabilities. Using pneumatic actuators which have low stiffness, the service robot can guarantee safety. By suggesting a new serial-parallel hybrid type for the service robot which separates into positioning motion and orienting motion, we can achieve large workspace and high strength-to-moving-weight ratio at the same time. A sliding mode controller can be designed for tracking the desired output using the Lyapunov stability theory and structural properties of pneumatic servo systems. Through many experiments of circular trajectory, the pneumatic service robot is evaluated and verified.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.3
• /
• pp.136-142
• /
• 2008

Mobile robots can offer services like intelligent monitoring in an indoor environment using network connection with remote users. In this paper, we designed and developed a networked security robot system with various sensors, such as flame detector, gas detector, sound monitoring module, and temperature sensor, etc. The robot can be accessed through a web service and the user can check the status of the environment. Using ADAMS software, we defined the motor specification for a worst-case condition of climbing over a obstacle. We applied the robot system in monitoring office condition.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.7-12
• /
• 1992

This paper proposes a sensor-based path planning method which utilizes fuzzy logic and neural network for obstacle avoidance of a mobile robot in uncertain environments. In order to acquire the information about the environment around the mobile robot, the ultrasonic sensors mounted on the front of mobile robot are used. The neural network, whose inputs are preprocessed by ultrasonic sensor readings, informs the mobile robot of the situation of environment in which mobile robot is at the present instant. Then, according to the situation class, the fuzzy rules are fired to make a decision on the mobile robot action. In addition, this method can be implemented real time since the number of fuzzy rules used to avoid the obstacle is small. Fuzzy rules are constructed based on the human reasoning and tuned by iterative simulations. The effective of the proposed avoidance method is verified by a series of simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.96-99
• /
• 1992

Currently, there are various robot programming methods for articulated robots. Although each method has merits and drawbacks, they have commonly weak points for practical application, and especially the weak point can be even more vulnerable when the robot programming requires the subtle feelings of human being. This is because the movement of a human being is synthetic while the robot programming is analytic. Therefore, the present method of programming has limits in performing these kinds of subtle robot movement. In this paper, we propose a direct robot programming method, which generates robot programs based on the force/torque vector applied to a force/torque sensor by the human operator. The method reduces the effort required in the robot programming.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.786-791
• /
• 1992

When a mobile robot moves from one place to another, position error occurs due to the limit of accuracy of robot and the effect of environmental noise. In this paper. an accurate method of estimating the position and orientation of a mobile robot using the camera calibration is proposed. Kalman filter is used as the estimation algorithm. The uncertainty in the position of camera with repect to robot base frame is considered well as the position error of the robot. Besides developing the mathematical model for mobile robot calibration system, the effect of relative position between camera and calibration points is analyzed and the method to select the most accurate calibration points is also presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.5-8
• /
• 1999

The main stream of researches on the mobile robot is planning motions of the mobile robot under nonholonomic constraints while only considering kinematic model of a mobile robot. These researches, however, assume that there is some kind of dynamic controller which can produce perfectly the same velocity that is necessary for the kinematic controller. Moreover, there are little results about the problem of integrating the nonholonomic kinematic controller and the dynamic controller for a mobile robot. Also the literature on the robustness of the controller in the presence of uncertainties or external disturbances in the dynamical model of a mobile robot is very few. Thus, in this paper, the robust adaptive controller which can achieve velocity tracking while considering not only kinematic model but also dynamic model of the mobile robot is proposed. The stability of the dynamic system will be shown through the Lyapunov method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.372-376
• /
• 1990

This paper represents a control method of improving the performance of direct drive robot. The direct transfer of torque and rotational speed of direct drive motor to the robot body without reduction gear makes the robot speed fast. However, the variation of inertia matrix and low friction cause the control difficult, and one more effort must be in the reducing the acceleration and deceleration time to reduce the cycle time. To fasten the cycle time and to improve the robustness of robot, one control method is developed, and implemented in the Goldstar DD robot. This method does not need to change the conventional PI type control structure, but one additional compensational control law is required. The control law can be obtained via inverse dynamic model of robot, and inverse model of existing control loop. The effects of this control law are shown in this paper.

• International Journal of Safety
• /
• v.7 no.1
• /
• pp.1-4
• /
• 2008

Application of the Microsoft robotics studio (MSRS) to the design of a factory safety monitoring robot is presented. Basic structures of the MSRS and the service are introduced. The service is the key building block of the MSRS. Control of the safety monitoring robot is performed using four basic services: 1) the robot service which communicates with the embedded micro-processor and other services, 2) the sensor service that notifies the subscribing services of the change of the sensor value, 3) the motor service which controls the power levels to the motors, 4) the drive service which maneuvers the robot. With built-in capabilities of the MSRS, control of factory safety monitoring robot can be more easily performed.