• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.552-557
• /
• 2004

This paper presents a disturbance observer based on an $H_{\infty}$ controller synthesis for the trajectory control of a hydraulic excavator. Compared to conventional robot manipulators driven by electrical motors, the hydraulic excavator has more nonlinear and coupled dynamics. In particular, the interactions between an excavation tool and the materials being excavated are unstructured and complex. In addition, its operating modes depend on working conditions, which make it difficult to not only derive the exact mathematical model but also design a controller systematically. In this study, the approximated linear model obtained through off-line system identification is used as nominal plant model for a disturbance observer. A disturbance observer based tracking controller which considers the effect of disturbance and model uncertainty is synthesized in $H_{\infty}$ frameworks. Simulation results are used to demonstrate the applicability of the proposed control scheme.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.9
• /
• pp.104-114
• /
• 1995

Mathematical models of industrial robots or manipulators are composed of highly nonlinear equations with nonlinear couplings between the variables of motions. These nonlin- earities were not considered important in the first stage that the working speed of the manipulator was not so fast, but the effect of nonlinear forces has become serious, as the working speed has been increased. So more improvement of performance cannot be expected by the control of manipulator using approximate linearization. As an approach for solving these problems, there is a method that eliminates nonlinear theory, which makes possible cecoupling of coupling terms and arbitrary arranging of poles is briefly introduced in this study. When the theory is applied to design the control law, its feasibility is examined whether the reasonable control results are obtained by simulating position, velocity, torque and tracing trajectory. The relations between the coefficients of the linearized differential equations and the maximum error and torque for the prescribed trajectory are also examined. Finally, the method for selecting the values for getting the most rapid and precise response within maximum torque of each drive is suggested in the choice of coefficients of characteristic equations which are obtained as a result of the control.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.209-218
• /
• 2001

Ultrasonic motors are newly developed motors which are expected to be useful as actuators in many practical systems such as robot arms or manipulators because of several advantages against the electromagnetic motors. However, the precise control of the ultrasonic motor is generally difficult due to the absence of appropriate and rigorous mathematical model. Furthermore, owing to heavy nonlinearity, the position control of a pendulum system driven by the ultrasonic motor has a problem that control method using multiple neural network controllers based on a fuzzy inference system that can determine the initial position of the pendulum in the beginning of control operation. In addition, and appropriate neural network controller that has been learned to operate well at the corresponding initial position is adopted by switching schemes. The effectiveness of the proposed method was verified and evaluated from real experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1376-1385
• /
• 1993

This paper presents a new dynamic model which is represented by the second order differenatial equation and itcludes the robot arm dynamics as well as the actuator dynamics. The model exhibits excellent performance in the steady state and transient response. In addition the time varing nonlinear and coupled dynamic system has been linearized and decoupled by using nonlinear feedback and linearization method. In this case a pole assignment law is used to improve stability, and the optimal control altorithm is applied to the error equation to minimize the path error. In applying the proposed algorithm to the three joint manipulator with actuators, we obtained very encouraging results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1631-1634
• /
• 1997

Since surgery is usually a difficult task because of physiological tremor, eye strain, and tremor, contagious and radioactive hazard, it is necessary to develop micro-surgery telerobotic system using improved tools suitable for their specific tasks. Nowadays the growth of interest on microsurgery and medical applications of robotics has been so rapid. But the medical robots are only practical applications of the industrial robots. This paper identifies five general areas of advanced microsurgery based on the current technological background and expertise, and analyzes the motion, tool and accuracy with respect to microsurgery task, and proposed the criteria to evaluate micro-surgical manipulator. The analysis of microusrgery can be heplful to clarify some basic concept and design of micro-surgical manipulators. With these data we will alos propose an efficient in-parallel-platform manipulator having special kinematic structrue structure suitable for microsurgery.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.908-913
• /
• 1993

The inverse kinematic solutions for redundant manipulators using the optimality augmented resolution schemes have been used without investigating the characteristics of the optimal solutions. The questions with this kind of resolution methods are answered in this paper, that is (i) the characteristics of solutions, (ii) of algorithmic singularities, (iii) their dimensionality, and (iv) the invariance of the characteristics during resolutions. 3-DOF planar redundant robot is analyzed when the inverse kinematic method is applied with the manipulability as an example.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.197-200
• /
• 2001

본 논문에서는 특정한 형태의 제약 즉, 매니퓰레이터의 자유도와 주어진 제약조건의 차원의 차이가 1이며, 매니퓰레이터의 동역학을 작업영역에서의 축차모델로 나타내었을 때, 변환행렬이 단위행렬로 나타나는 제약을 가지는 불확실한 로봇 매니퓰레이터의 위치/힘 추종을 위한 적응제어기를 제안한다. 제안된 제어기는 비선형 좌표변환을 통하여 얻어진 로봇의 축차모델(reduced-order model)을 이용하여 위치제어와 힘제어의 문제를 분리한다. 특히, 비선형 동적 필터를 이용하여 위치의 측정만을 필요로 하며, 적응제어 기법을 통하여 전역 점근적인 안정성을 보장한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.832-837
• /
• 1991

After many years of proliferation, the nuclear industry is indebted for a formidable consequence, the safe management of spent fuel. Naturally, the high radioactivity involved with such process motivates the development of effective telerobotic systems. Nevertheless, the existing master-slave type of tele manipulators are limited in effectiveness by the human operator's limited sensory and manipulation capabilities. This paper presents the result of a research effort to resolve such problems by assigning the slave manipulator a certain degree of intelligence; sensing and actuation. In the presented system, a perception-action loop is achieved using ultrasonic range sensor and laser distance sensor interfaced with the PUMA 760 industrial robot system, and applied to automating impact wrenching task for unbolting the lid of nuclear spent fuel cask. The perception-action loop performs determination of the cask location, collision avoidance and centering of the impact wrench onto the bolt head. To aid the insertion task and to provide versatility a mounting module consisting of an RCC device and an automatic tool changer is designed and implemented. The performance of the developed system is tested on the model cask and the result is given.

• Structural Engineering and Mechanics
• /
• v.5 no.3
• /
• pp.283-295
• /
• 1997

This paper presents a high precision integration method for the dynamic response analysis of structures with holonomic constraints. A detail recursive scheme suitable for algebraic and differential equations (ADEs) which incorporates generalized forces is established. The matrix exponential involved in the scheme is calculated precisely using $2^N$ algorithm. The Taylor expansions of the nonlinear term concerned with state variables of the structure and the generalized constraint forces of the ADEs are derived and consequently, their particular integrals are obtained. The accuracy and effectiveness of the present method is demonstrated by two numerical examples, a plane truss with circular slot at its tip point and a slewing flexible cantilever beam which is currently interesting in optimal control of robot manipulators.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2874-2876
• /
• 2000

본 연구에서는 [1]에서 제안된 알고리즘을 마찰력이 존재하는 로봇 매니퓰레이터에 적용하여 위치제어를 수행하였다. 제안된 제어 알고리즘은 로봇의 위치 정보만을 이용하는 반복적 제어구조를 가지고 있다. 또한 제어기 설계 시, 로봇의 파라미터를 이용하지 않기 때문에 파라미터 불확실성이 있는 시스템에 강인한 특징을 보인다. 제안된 제어기의 성능을 검증하기 위하여.마찰력이 존재하는 2축 SCARA형 로봇에 적용하여 시뮬레이션 수행하였다