• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.163-171
• /
• 2005

Current roads were designed and constructed based on the design criteria and thus those were overly simplified drivers' needs. The road criteria do not suggest the desirable range of the design values but suggest the minimum requirements for the road design. Therefore, a completed road design based on the design criteria does not always guarantee the best design in terms of safety and it sometimes violates drivers' expectation. Therefore, the ROSSAV(ROad Safety Survey and Analysis Vehicle) is being developed by the KICT to evaluate road safety and increase driving safety. In this paper, the image capture system was described in detail. The image capture system is consisted of two front view cameras, two side down-looking cameras and a synchronization device. Two front view cameras were used to take a picture of road and road facilities at the driver's viewpoint. Also, two side down-looking cameras were used to capture road surface image to extract lane markings. A synchronization device were used to generate image capturing signal at the fixed distance spacing huck as every 10m. The front view images could be used to calculate and measure highway geometry such as shoulder width because every image is saved with it's locational information. And also the side down looking images could be used to extract median lane mark which representing road alignement efficiently.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.363-373
• /
• 2011

With rapid economic development, general demand and interest in surroundings that consist of our lives have grown gradually. In addition, as there has been increased social interest in creating landscape of roads, which considers all important factors from the user's view including accessibility, safety, and psychological stability, efforts to improve quality of roads are required. Therefore it is needed to establish standards on safe and comfort road design based on sensibility satisfaction of road users rather than based on standardized road design guidance from the engineering perspective. To this end, research was carried out to analyze sensibility satisfaction of users about road landscape focused on elements of road cross section in a city. It identified relation between sensibility satisfaction and the elements by using principal and cluster analysis, and the multiple regression models. It also found that user's satisfaction about roads and a road landscape is high with road width (3~5 meters), clear zone (2.2~3.9 meters), road central garden (1.05~1.9 meters), shoulder (0.55~1.43 meters), median (0.65~1.625 meters), the number of travel lanes (2~5), height of trees at the central garden (6.4~15 meters) and height of buildings surrounding roads (18~44 meters or 6~15 floors).

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.169-181
• /
• 2016

The address system in Korea was changed to the road-based system in 2014, but the current address coordinates are still largely based on the old, parcel-based system. Compared to the parcel-based address system that defines the center of a parcel as its coordinates, the road-based system locates the coordinates at a certain distance away from the road on which the parcel fronts. The difference in coordinates between these two systems is small, but it can be crucial for micro-level modelling. In order to assess the impact of the discrepancy between the two address systems, this study measured the degree of air pollution exposure at two different locations, the road-based address coordinates and the parcel-based address coordinates, for each of 252 buildings in Yeongdeungpo-gu, Seoul. The air pollution values were estimated using a microscopic air pollution dispersion model, CALINE4, and t-tests and F-tests were conducted to evaluate statistical significance on the observed difference. The results showed a considerable difference in the level of air pollution exposure between the two address systems, suggesting that the on-going use of the parcel-based address coordinates could cause potentially significant errors in micro-level analysis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.25-32
• /
• 2013

Entry speed of the vehicle and lateral acceleration acting on the vehicle, roll-angle associated with the overthrow, and then the structure of the road, the friction of road surface are important factors in turning on the curved road. In this study, we analyzed the state change of the vehicle causing entry speed of the vehicle and superelevation of the road, the friction coefficient by using a PC-crash Program for traffic accident reconstruction. As a result, when vehicle is turning the curved road, we could ascertain that the structure of the road and state of the road surface are a major factor about the set up of limited speed.

• International Journal of Highway Engineering
• /
• v.19 no.3
• /
• pp.83-90
• /
• 2017

PURPOSES : In this study, systematic road snow-removal capabilities were estimated based on previous historical data for road-snowremoval works. The final results can be used to aid decision-making strategies for cost-effective snow-removal works by regional offices. METHODS : First, road snow-removal historical data from the road snow-removal management system (RSMS), operated by the Ministry of Land, Infrastructure and Transport, were employed to determine specific characteristics of the snow-removal capabilities by region. The actual owned amount and actual used amount of infrastructure were analyzed for the past three years. Second, the regional offices were classified using K-means clustering into groups "close" to one another. Actual used snow-removal infrastructure was determined from the number of snow-removal working days. Finally, the correlation between the de-icing materials used and infrastructure was analyzed. Significant differences were found among the amounts of used infrastructure depending on snowfall intensity for each regional office during the past three years. RESULTS:The results showed that the amount of snow-removal infrastructure used for low heavy-snowfall intensity did not appear to depend on the amount of heavy snowfall, and therefore, high variation is observed in each area. CONCLUSIONS:This implies that the final analysis results will be useful when making decisions on snow-removal works.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.3
• /
• pp.37-50
• /
• 2013

Since 2010, RDA has discovered 30 Green-Road as the way of developing rural area. However, results from conference with expert and village leaders of Green-Road concluded that there were problems such as little financial benefits due to mismanagement and needs of improving the efficiency of management. In order to respond to these issues, this research has conducted empirical investigation about the status, management of Green-Road and its influences on local area. Main purposes of this investigation was to reveal the various obstacles in road management, and to find better ways of road management. To accomplish the goal of research, this study conducted survey and interviews with leaders in villages. Particularly, the investigation had focused on the specific management issues suggested by village leaders. Based on the results, this research suggested establishing a committee for creating leaders network and developing effective management method in order to improve road management and its consequences.

• International Journal of Contents
• /
• v.16 no.3
• /
• pp.66-86
• /
• 2020

With the rapid growth of high-tech, the development of cultural and creative industries has gradually become the focus of national industrial development. With the proposal of China's "Belt and Road" strategy, the role of cultural and creative industries in the provinces and cities along the "Belt and Road" in the entire international trade is becoming increasingly critical. It is necessary to explore solutions to improve the competitiveness of China's cultural and creative industries, factoring the surrounding cities of the "Belt and Road" as an example. Thus, this paper proposes the six-element diamond model based on innovation capability and government support to render a comprehensive evaluation of the competitiveness of the cultural and creative industries in the 31 provinces and cities across the country. The results show that the overall competitiveness of the 18 provinces and cities along the "Belt and Road" cultural and creative industries is weak. Focusing on the 18 provinces and cities along the "Belt and Road", using the linear regression measurement model quantitative analysis, the four types of influencing factors affecting the development of the competitiveness of cultural and creative industries along the "Belt and Road" were obtained. Finally, according to the four types of influence, the competitiveness improvement plan is proposed from the four aspects: government role, consumption preference, industrial innovation ability, and the introduction of high-quality talent.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.6
• /
• pp.681-690
• /
• 2014

It is known that sewer problems are the major causes of road cave-in. The objective of this study is to analyze the risk of road cave-in due to storm sewer laterals. We investigated 174 storm sewer laterals using a zoom camera at O-dong area in Seoul. The causes of road cave-in were classified into five cases: breakage of rigid pipe, deformation of flexible pipe, out of pipeline alignment, changing pipe material or changing pipe diameter, and a poor linkage between lateral and sewer. In addition, all defects were sorted into five grades based on the severity rating at storm sewer laterals. In this study, the most fragile pipe materials were found to be concrete pipe and polyethylene pipe, which recorded 2.3 and 1.69 defect rates. With regard to the causes of road cave-in, deformation of flexible pipe has a large influence on road cave-in at present. On a long-term basis, the two causes, out of pipeline alignment and a poor linkage between lateral and sewer, could have more influence on road cave-in.

• Journal of Environmental Health Sciences
• /
• v.34 no.4
• /
• pp.311-315
• /
• 2008

This study was performed to investigate propagation characteristics and effects of road traffic noise generated from vehicles. Noise levels of expressway and general road were measured at four points in a straight line based on distance from the road, and analyzed. The average noise level of expressway was 78.9 dBA at 5 m, 76.4 dBA at 10 m, 72.0 dBA at 20 m, 69.0 dBA at 30 m. That of general road was lower about $3.1{\sim}3.5\;dBA$ than that of expressway. There was no significant difference in distance attenuation between expressway noise and general road noise. The farer the distance from source is, the more the attenuation is. The influence range of noise is assessed by noise environmental standards or road noise limits. Noise levels of the time zone were measured at a boundary line of apartment to grasp noise variation by time. The time zone of lowest noises was $3{\sim}4$ a.m. and that of highest noise was $8{\sim}10$ a.m. Data recorded on tapes were analyzed to understand the characteristics of frequency because these characteristics are important factors to plan the noise reduction measures, namely path measures.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.512-519
• /
• 2016

In this study, the tire road friction estimation(TRFE) algorithm for controlling the rear wheel driving force of a 4WD vehicle during acceleration is developed using a standard sensor in an ordinary 4WD passenger car and a speed sensor. The algorithm is constructed for the wheel shaft torque, longitudinal tire force, vertical tire force and maximum tire road friction estimation. The estimation results of shaft torque and tire force were validated using a torque sensor and wheel force transducer. In the algorithm, the current road friction is defined as the proportion calculated between longitudinal and vertical tire force. Slip slop methods using current road friction and slip ratio are applied to estimate the road friction coefficient. Based on this study's results, the traction performance, fuel consumption and drive shaft strength performance of a 4WD vehicle are improved by applying the tire road friction estimation algorithm.