• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.617-624
• /
• 2010

This article describes the system architecture of KUVE (KIST Unmanned Vehicle Electric) and unmanned autonomous navigation of it in KIST. KUVE, which is an electric light-duty vehicle, is equipped with two laser range finders, a vision camera, a differential GPS system, an inertial measurement unit, odometers, and control computers for autonomous navigation. KUVE estimates and tracks the boundary of road such as curb and line using a laser range finder and a vision camera. It follows predetermined trajectory if there is no detectable boundary of road using the DGPS, IMU, and odometers. KUVE has over 80% of success rate of autonomous navigation in KIST.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.3
• /
• pp.43-52
• /
• 2023

When a children's school bus stops on the road, the operator enables an amber flashing light (indicating stopping or slowing) or a red flashing light (indicating that children are getting on and off). Drivers of vehicles passing by the stopped school bus, as well as vehicles in adjacent lanes to the school bus must stop temporarily. However, many drivers are not aware of the laws and do not comply with them, so children are exposed to an increased risk of being hit, especially at night as the color recognition of the vehicle is significantly lower than during the day. In our experiments, messages and shapes using light were projected to the front and rear of a parked school bus, in addition to its red lights flashing.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.1
• /
• pp.16-26
• /
• 2023

Recently, the importance of simulation in a virtual driving environment as well as real road-based tests for autonomous vehicle testing is increasing. Real road tests are being actively conducted at K-City, an autonomous driving test bed located at the Korea Automobile Safety Test & Research Institute of the Transportation Safety Authority. In addition, the need to advance the K-City virtual driving environment and build a virtual environment similar to the autonomous driving system test environment in real road tests is increasing. In this study, for K-City of Korea Automobile Safety Test & Research Institute, using detailed drawings and actual field data, K-City virtual driving environment was advanced, and similarity verification was verified through comparative analysis with actual K-City.

• Advances in Computational Design
• /
• v.7 no.4
• /
• pp.371-393
• /
• 2022

This paper presents a three-dimensional flexible pavement simulated in ANSYS subjected to moving vehicular load on the surface of the pavement typical for the road section in Nepal. The adopted finite element (FE) model of pavement is validated with the classical theoretical formulations for half-space pavement. The validated model is further utilized to understand the damping and dynamic response of the pavement. Transient analysis of the developed FE model is done to understand the time varying response of the pavement under a moving vehicle. The material properties of pavement considered in the analysis is taken from typical road section used in Nepal. The response quantities of pavement with nonlinear viscoelastic asphalt layer are found significantly higher compared to the elastic pavement counterpart. The structural responses of the pavement decrease with increase in the vehicle speed due to less contact time between the tires of the vehicle and the road pavement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.28-41
• /
• 2022

A road system with CV(Connected Vehicle)s, which is often referred to as a cooperative intelligent transportation system (C-ITS), provides various road information to drivers using an in-vehicle warning system. Road environments with CVs induce drivers to reduce their speed or change lanes to avoid potential risks downstream. Such avoidance maneuvers can be considered to improve driving behaviors from a traffic safety point of view. Thus, empirically evaluating how a given in-vehicle warning information affects driving behaviors, and monitoring of the correlation between them are essential tasks for traffic operators. To quantitatively evaluate the effect of in-vehicle warning information, this study develops a method to calculate compliance rate of drivers where two groups of speed profile before and after road information is provided are compared. In addition, conventional indexes (e.g., jerk and acceleration noise) to measure comfort of passengers are examined. Empirical tests are conducted by using PVD (Probe Vehicle Data) and DTG (Digital Tacho Graph) data to verify the individual effects of warning information based on C-ITS constructed in Seoul metropolitan area in South Korea. The results in this study shows that drivers tend to decelerate their speed as a response to the in-vehicle warning information. Meanwhile, the in-vehicle warning information helps drivers to improve the safety and comport of passengers.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.141-144
• /
• 1996

This study deals with the problem of the recognition of the preceding vehicles by image processing. The purpose of this study is the development of the equipment to prevent a collision with preceding vehicles during driving the vehicle. In order to decrease the processing time and increase reliability, at first, the traffic lane is extracted. It is determined by detecting road edges and calculating their tangent. After the traffic lane is gotten, the position of the vehicle is searched inside the lane. The features used to detect the vehicles in the algorithm are shadow of the vehicle, vertical edges, horizontal edges, and symmetrical segment. The preceding vehicles are extracted successfully by this method.

• Journal of the Korean Professional Engineers Association
• /
• v.9 no.3
• /
• pp.8-19
• /
• 1976

A set of study has been made on the table of vehicle running costs, officially used by Korean government, in view to clarifay the relative value of costs composition characteristic and reduction rate due to road surface improvement. The amount of vehicle running costs in Korea and of the components, has been compared, with the corresponding value of the USA, Japan, France, Great Britain and Italy. Findings are briefly summerized : vehicle running costs have been found to be generally much expensive in Korea than the four developed countries except Italy; and significant differences have been also found on the pattern of savings for components of vehicle running costs presumable by pavement construction on road surface, between two countries, Korea and the USA.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2393-2396
• /
• 2005

We present a method to detect on-road vehicle using geometric invariant of feature points on side planes of the vehicle. The vehicles are assumed into a set of planes and the invariant from motion information of features on the plane segments the plane from the theory that a geometric invariant value defined by five points on a plane is preserved under a projective transform. Harris corners as a salient image point are used to give motion information with the normalized correlation centered at these points. We define a probabilistic criterion to test the similarity of invariant values between sequential frames. Experimental results using images of real road scenes are presented.

• Interaction and multiscale mechanics
• /
• v.3 no.4
• /
• pp.389-403
• /
• 2010

Based on the Model Coupled Method (MCM), a case study has been carried out on a Concrete-Filled Steel Tubular (CFST) tied arch bridge to investigate the vibration problem. The mathematical model assumed a finite element representation of the bridge together with beam, shell, and link elements, and the vehicle simulation employed a three dimensional linear vehicle model with seven independent degrees-of-freedom. A well-known power spectral density of road pavement profiles defined the road surface roughness for Perfect, Good and Poor roads respectively. In virtue of a home-code program, the dynamic interaction between the bridge and vehicle model was simulated, and the dynamic amplification factors were computed for displacement and internal force. The impact effects of the vehicle on different bridge members and the influencing factors were studied. Meanwhile the acceleration responses of some of the components were analyzed in the frequency domain. From the results some valuable conclusions have been drawn.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.346-348
• /
• 2005

In this paper, we designed a vehicle active suspension controller. Vehicle suspensions have various design objects with tradeoff among them and these objects cannot be satisfied under all driving conditions. We need to design a controller adapted to variable driving conditions changing the objects of vehicle suspensions. To design such a controller, we must be able to detect the current driving conditions and focus on the road frequencies giving us useful and important information about driving conditions. Detecting the road frequencies, we use the Fourier Transform. A unexpected driving change like a speed bump was also included to items the new designed controller must consider.