• Journal of the Korean Society of Food Culture
• /
• v.23 no.1
• /
• pp.10-17
• /
• 2008

The author examined the origins, the course and the period of introduction of 94 types of vegetables and fruits mainly used in Korea. Then, based on it, the author looks into the relationship between food culture in Korea and those in the Silk Road. Among the vegetables and fruits, 57 types are not originated from Korea 17 types of stem and leaf vegetables, 9 types of root and fruit vegetables. 7 types of fruits, 6 types of seed, 6 types of pomes, 2 types of berries and grapes, and 1 type of nut. Their origins are spread in Europe, Southwest and South Asia but interestingly, they are located near or along the Silk Road. Therefore, it can be presumed that the vegetables and fruits were introduced into Korea from its neighboring countries by way of the Silk Road even before the Three Koreas Period and they were eaten widely in the Joseon Dynasty. Thus, the Silk Road helped some of the vegetables and fruits used in Korea to be introduced into Korea and eventually, contributed to diversifying Korean food culture. The cultural exchange is not one-way but two-way communication and the cultural exchange through the Silk Road is no exception. It is certain that by way of the Silk Road, foods and recipes were introduced into Korea from other countries but at the same time, Korean foods and recipes were propagated to other countries. In the future, more researches and studies should be conducted to find out how the foods and recipes are exchanged among the countries by the way of the Silk Road.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.61-68
• /
• 2009

In this study, computer simulation program was using to identify the effects of road traffic noise propagation depending on the road types which are very variable in dense city. To achieve this goal, the roads should adjacent to housing complex were categorized into 7 types and propagation noise level should predicted then after simulation of noise exposure population calculation are carried out. Followings the results. First, the road types producing the higher noise level are R1, R2, R3 and R7. The lowest one is R6. And R4, R5 showed that some amount of noise level reduction. Second. the R6 road type which is tunnel shaped showed the highest noise level reduction in vertical distance gap. Last, the order of noise exposure population ratio is R1>R2>R7 and R6 showed the lowest.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.129-136
• /
• 2014

PURPOSES : This study devotes its energies to estimate greenhouse gas emissions for types of horizontal highway designs. METHODS : This paper suggested two types of road scenarios, scenario 1 is made by the lack of road design consistency. Beside scenario 1, scenario 2 is made by good road design. For comparisons of greenhouse gas emissions, driving simulator was used. RESULTS : Emission rates of road scenario 1 are 1.4 times higher than scenario 2 in the driving simulator. CONCLUSIONS : This study may have important implications for contributing to the application of road alignment technology for reduction of greenhouse gases as quantifying the correlations between greenhouse emissions and various road alignments. Consequently, this study will help road designers determine which roads are best alternatives in the process of choosing the roads in the future in terms of environmental benefits.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.1-7
• /
• 2020

This study is a study on the development of AEBS test scenarios for traffic accidents in Korea, and was compared and analyzed using the Traffic Accident Analysis Program. To ensure the safety of passengers and pedestrians in traffic accidents, the number of cars equipped with ADAS is increasing rapidly at all car manufacturers in each country. For traffic accidents used in this study, the domestic traffic accident database (ACCC) produced by SAMSONG was used. Domestic traffic accidents differ from overseas traffic accidents in terms of road type, signal system, driver's seat location and number of vehicles. ACCC databases, which supplemented and reinforced these differences, built a database based on the PC-CRASH program. In the study, we analyze the types of accidents to develop comparative scenarios for each type of road and collision type of traffic accidents. When the road types of traffic accidents in Korea were divided into five types and the collision types were divided into six, it was confirmed that the most types of FRONT-SIDE crashes appeared at the intersection. It is expected that the frequency of possible traffic accidents and collision types can be predicted according to the road type in the accident database, we that it can be used as an AEBS test scenario development suitable for the domestic road environment.

• Journal of Fashion Business
• /
• v.19 no.1
• /
• pp.34-46
• /
• 2015

The purpose of this study was to investigate the distribution state of road shops around the 9 main fashion trade areas in Seoul, and to analyze whether there were any differences in them based on clothing, store types and regions. Furthermore, by investigating the distribution state of road shops in the 9 main fashion trade areas per year, this study provides basic information that can be helpful in opening and securing road shops in major trade areas. The method of investigation was to analyze clothing types and store types with 72 maps of commercial areas. Samsungdesignnet investigated these areas for 8 years around the 9 main fashion trade areas (Garosugil, Gangnam nonhyun, Gangnam Station, Myungdong, Moonjung, Apgujung, Yeonsinne, Edae, and Chungdam). As a result, the distribution state of the fashion road shops based on clothing types revealed that road shops for ladies' wear, bag or shoes, and total fashion were strong, and the distribution state of non brand were strong. When it came to year-to-year trends, road shops for women's wear, bag or shoes, and total fashion showed a steady increasing tendency of being on-trend, but casuals and underwear showed a falling tendency of being on-trend. In terms of store type distribution, non-brand shops showed the most remarkable growth, followed by multi-shop while total fashion store showed a steady growth. Also, when it came to regional distribution, the dominant trade areas were different based on clothing type. Garosugil showed the widest variation in its yearly trend investigation, and Gangnam station also showed a substantial amount of growth. In other areas, there was no considerable change in the total number of shops, but increasing and decreasing markets had a complexity that depended on clothing types.

• Elastomers and Composites
• /
• v.56 no.2
• /
• pp.85-91
• /
• 2021

In this study, different types and shapes of various particles produced on the asphalt pavement road were analyzed. Road dust at a bus stop was collected and was separated as per their sizes by using a sieve shaker. Tire-road wear particles (TRWPs), asphalt pavement wear particles (APWPs), mineral particles, plant-related particles, glass beads, glass particles, road paint wear particles, plastic particles, and fibers were observed herein. The types and shapes of the particles varied depending on their sizes. TRWPs larger than 500 ㎛ were not observed. TRWPs with a size of 212-500 ㎛ were rarely present, but many TRWPs with a size smaller than 212 ㎛ were observed. APWPs were observed for whole-particle sizes of below 1,000 ㎛. A variety of particles on the road would lead to lower friction between the tires and the road, thereby increasing the braking distance of vehicles. Most of the particles include mineral particles, glass particles, and APWPs with rough surfaces. Therefore, the abrasion of the tire tread would accelerate owing to friction with the tough particles.

• Journal of Korean Society of Transportation
• /
• v.7 no.1
• /
• pp.43-55
• /
• 1989

This study is to review the road traffics and its process by the type of business in annual Statistical Yearbook of Transportation published under the supervision of Ministry of Transport, and the main purpose of this study is to find out an recommendations for the result of the review. For this purpose, this study surveyed and analyzed actual results and its output process in Statistical Yearbook by vehicle and business types. The local survey is performed for the nationwide 23 cities to produce passenger (ton) number and passenger (ton)-㎞ number by vehicle and business types. The result of the local survey is compared with the road traffics in Statistical Yearbook of Transpotation. The result of the survey analysis reveals that road traffic in Statistical Yearbook is produced formally and there is remarkable differences between road traffic in Statistical Yearbook and local survey output. Conclusively, statistical output process of road traffics must be improved to solve th se problems mentioned above in respect to system and technic. Also it is recommended to publish its own road traffic statistics (tentatively named Statistical Yearbook of Road Transportation) just like Statistical Yearbook of Railroad for user's expediency and practicality.

• Safety and Health at Work
• /
• v.7 no.1
• /
• pp.38-42
• /
• 2016

Background: Truck driving is known as one of the occupations with the highest accident rate. This study investigates the characteristics of traffic collisions according to road types (expressway and rural road). Methods: Classifying 267 accidents into expressway and rural road, we analyzed them based on driver characteristics (age, working experience, size of employment), time characteristics (day of accident, time, weather), and accident characteristics (accident causes, accident locations, accident types, driving conditions). Results: When we compared the accidents by road conditions, no differences were found between the driver characteristics. However, from the accident characteristics, the injured person distributions were different by the road conditions. In particular, driving while drowsy is shown to be highly related with the accident characteristics. Conclusion: This study can be used as a guideline and a base line to develop a plan of action to prevent traffic accidents. It can also help to prepare formal regulations about a truck driver's vehicle maintenance and driving attitude for a precaution on road accidents.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.7
• /
• pp.99-106
• /
• 2018

The purpose of this study is to examine adaptation types of urban tissue in Ipjeong-dong area, Seoul. Ipjeong-dong area has urban tissue those were made during Joseon dynasty and this is remaining even in the present time. This area was originally urban hanok residential districts till late 1950s. However, it has changed into machinery manufacture business area after demolition of Cheonggyechon shantytown. After several workshops and stores moved in this area, manufacturer and merchants required for more spaces due to lack of room for machinery. To place more workshops in the block, lot alteration were happened and accessibility to workshops inside the block were required. Adaptive road network which is main form of adaptative urban tissue were made to adapt in this kind of poor urban condition. To research about adaptive urban tissue making, distribution were explored and comparison tasks between various cadastral map of 1940, 1964, 1970s and 2017 were conducted. From these tasks, certain types of adaptive urban tissues and characteristics of these elements were found. First of all, forms of adaptive road depend on the surrounded environment. Connecting internal building corridor with original road system is categorized as Type A. Altering a portion of the buildings to make adaptive roads is categorized as Type B. Second, there were two types of formation of adaptive road. Type 1 is for adaptive road which is independent gesture from original road network. Type 2 is for adaptive road which is altering the form of original road network by lengthening or connecting two different dead-end roads.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.23-31
• /
• 2016

PURPOSES : This study aimed to offer a greenhouse gases table to assist a road designer in calculating the greenhouse gases for a road environment when making a decision about an alternative road. METHODS : This study developed an operation mode table of greenhouse gases using the MOVES program. Similar factors for Korean vehicles and fuels are reflected in the MOVES program, which was made in the USA. Finally, a paired t-test was conducted to calculate the site data and MOVES data. Through these studies, a methodology was suggested for calculating carbon emissions based on various types of roads alignments. RESULTS : The site results for a passenger truck on the road were statistically significant when the vehicle speed was above 65 km/h. However, a future study will consider factors for various road alignments and vehicles. CONCLUSIONS : This study will contribute to the theoretical basis for reducing carbon emissions from roads by helping road designers make decisions about road alternatives in terms of the road environment.