• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.112-118
• /
• 2011

The recycled asphalt concrete has gotten increasing attention due to the environmental issues. The volume of reclaimed asphalt has increased significantly for last few years because of city remodeling, pavement maintenance, utility excavation, and road widening. Considering the value of reclaimed asphalt, it is rather used for the recycled asphalt concrete than it is used for fill and cover up material instead of soil. This research will be a supplements incomplete issues from existing research results and suggests the quality control guideline for recycled asphalt concrete and upcoming laws. As the first step of research, the trial construction of RAP(Recycled Asphalt Pavement) performed in expressway construction sites. These trial construction sites have been checked every years. And another construction sites studied and selected for more deeper performance check of RAP. For this checks, we used automatic pavement survey equipment and computerized analysis tools. Also, DSR(Dynamic Shear Rheometer) was used for the fatigue life calculation of binder blends(RAP and virgin binder). As a consequence of this research, the application of recycled asphalt provides good enough quality for highway construction. The preceeding literatures reviewed shows that the asphalt rejuvenator are used in many countries but that type of chemical agent are not used in Korea. By using the data of trial construction and mix design in Chongwon-Sangju construction lane, the surface and base courses consisted with the 10% and 30% rap mix asphalt section maintains good performance for up to 7 years. Through the performance check and laboratory tests(DSR), the quality control and mixture's low temperature prevention are the important factor and chemical agent necessary for increasing the fatigue life of RAP binder.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1571-1579
• /
• 2014

93% of road traffic accidents result from drivers' fault and Korea has the largest number of deaths from traffic accidents among the OECD members. For this reason, the country is measuring Traffic Culture Index (TCI) in each city, gun and gu annually to improve traffic safety policies and promote safety consciousness, but the influencing relation between TCI and actual traffic accidents is only based on the assumptions and no verification has been carried out, yet. Therefore, this study aims to verify if in reality, TCI represents the traffic culture level and has an influencing relation with traffic accidents and to suggest an improvement plan of research on the present state of TCI, based on the result. For this purpose, bases on data of the report about the present state of TCI from 2010 to 2012, and the influencing relation between the number of traffic accidents and the number of deaths from traffic accidents was analyzed through structural equation model. For influencing relation analysis through structural equation, research 1 to analyze the relation among TCI in each city, gun and gu, the number of traffic accidents and the number of deaths, and research 2 to analyze the influencing relation of the increase in TCI, the number of traffic accidents and the number of deaths were carried out. When verifying the influencing relation with traffic accidents through structural equation, the goodness of fit of the model was low in research 1 and as TCI increased, the number of accidents and deaths decreased in research 2 and thus the effect of TCI was verified.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.31-39
• /
• 2014

It has been a long time since cars had become important means of transportation in human life. Since 1970s, cars have been increasing steadily because of rising individual income and changing lifestyle toward leisure and convenience. The number of cars is just 1.8 per thousand populations in 1970s, however, in 2012, it has increased to 291.15. Forecasting the demand for cars would be useful to plan, construction or management in the field of motor industry, road building and establishing facilities. Our study predicts the demand of cars through estimating the growth curve model. Especially, we include ageing variables to forecasting identifying the effect of ageing on the demand of cars. The main findings are as follows. In 2045, the number of cars is expected to reach 486.8 per thousand populations with passing a primary saturation point at early 2020s. Also, due to effect of ageing, the predicted demand of cars is about 10% lower than in case of which if ageing effect not exist.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.1-11
• /
• 2020

The purpose of this study is to conduct an analysis for classification of unexecuted urban planning facilities using the Geographic Information System(GIS) to prepare measures for systematic and efficient management of unexecuted urban planning facilities and to find ways to establish national territory information for continuous management and operation by database of spatial data of classified unexecuted urban planning facilities. For this purpose, the present state of urban management plan, thematic map, cadastral map, satellite image of Korea Land Information System(KLIS) were collected from Miryang City, and qualitative analysis of the execution and non-execution of urban planning facilities was conducted by combining the layer of urban planning facilities, satellite images, and continuous cadastral layers of cadastral maps with classified and processed owner attribute information. According to the analysis, the unexecuted facilities were derived as unexecuted facilities, as most of the private land, without any current status roads or facilities created in satellite imagery. In addition, although the current status road was opened, the facilities that included some private land were derived as facilities that were recognized and executed by the local government as the de facto controlling entity through public transportation. The derived unexecuted urban planning facilities were divided into layers of shape data and the unexecuted property data were organized to quickly and accurately identify the status of non-executed and statistical information. In this study, we proposed an analysis plan that introduced GIS technology for scientific and rational analysis of unexecuted urban planning facilities and the establishment of reliable spatial data, and proposed a plan to establish a database for connection with existing systems and use of information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.3
• /
• pp.32-45
• /
• 2018

This study aims to compare the mutual perception gap on dangerous driving behavior between male and female drivers in multiple aspects, analyze them, and identify factors that trigger this different perception. To understand the mutual perception gap on dangerous driving behavior, DBQ(Driving Behavior Questionnaire) was applied as a rating scale. By applying results into the Co-oreintation model, this study compared the mutual perception gap between male drivers and female drivers and analyze results. In addition, factors that generate the perception gap between both genders were drawn by analyzing factors. This study suggested that objective consistency identified the perception gap that driving behaviors of others were more dangerous between two genders. In addition, subjective consistency was different as both genders assumed that the counterpart's driving behavior takes more risks than their own actual driving behaviors. In regard to the accuracy, men were aware that female driving behaviors are more dangerous than their behaviors. However, female driving behavior assumed by women was consistent with male perception in all factors, which indicated that women perceive men precisely. In addition, results were compared and analyzed in both perspectives of male drivers and female drivers by combining predictive models. Based on these results, both genders perceived that counterpart's driving behavior is more dangerous among both genders.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.87-96
• /
• 2015

Geosynthetics are widely used in different ways such as reinforcement of structures in road, railway, harbor and dam engineering, drainage, separation and erosion prevention. They are especially applied to reinforced retaining wall and slope or ground reinforcement. Recently, geosynthetics reinforced pile supported (GRPS) embankment was developed to improve stability and construability of embankments in railway engineering. Extension strains are usually measured by strain gauges adhered to geosynthetics to evaluate the stability of geosynthetics. However, the measurements are influenced by manufacturing method and stiffness of geosynthetics and also adherence of strain gauge. In this study, wide-width tensile strength tests were performed on three types of geosynthetics including geogrid, woven geotextile and non-woven geotextile. During the test, strains of geosynthetics were measured by both video extensometer and strain gauges adhered to the geosynthetics and the measured results were compared. Results show that the measured results by strain gauges have high reliability in case of large stiffness geosythetics like geogrid and woven geotextile, whereas they have very low reliability for small stiffness geosythetics like non-woven geotextile.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1357-1366
• /
• 2015

This study (II) aims to draw up the future-oriented construction policy recommendations based on the outcomes as a result of a broad research and conducting questionnaire surveys on the arguable issues raised by construction engineers for roads and bridges in the course of previous study (I) implementation. As for the question of "The term 'Construction Management (CM)' which currently is defined in two (2) ways", 45% of respondents have answered that two (2) different types of CM should be unified into one (1) CM type as is the case in most advanced countries. About the question of "The ways to educate the CM professionals", many respondents have preferred to acquire CM professional certificate after receiving education for a certain period of time from private CM training institutions. As for the question of The revised draft that the ICEC grade of special engineers for design, construction and quality control areas shall be "more than 78 points from a more than 75 points by the original draft." 52% of respondents preferred to maintain the original draft. About the question of "The reason why the CM system has not been working well yet." 62% of respondents have answered that the staff members who are in charge of handling public project procurements are concerned about the fact that their roles (or activities) might be deprived as a result of CM adoption. In order for the CM system to be activated, based on the notion that the construction projects must be out soured, the reshuffle of the headquarter organization of Ministry of Land, Infrastructure and Transportation (MLIT) should be preceded.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.3
• /
• pp.271-278
• /
• 2016

In the case of South Korea, steel girder bridge (steel box or H-steel) and PSC (Pre-Stressed Concrete) girder bridge are the representative upper structures of railroad and road bridges. These structures account for 75% of the total bridge constructions and 80% of the total construction cost. Since the form work for concreting bridge slab is difficult, various construction methods developed and applied. However, several problems in those methods did not solve partially, including cost increase by material loss and rise of labor costs, quality deterioration by unskilled workers, increased construction time by complicated method, reduced productivity, safety accident by high place work, difficult transportation by big member, and rise of maintenance cost by material characteristic. Alternative method is needed to solve problems of as-is methods. Therefore, the purpose of this study is development of the purlin hanging system form for the girder bridge slab and its economic analysis. Through the findings of this study, it was verified that the purlin hanging system form is possible 60% reduction in cost and 80% reduction in time as comparison with conventional method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.875-886
• /
• 2015

By promoting the international transportation and the improvement of advanced exchange between South and North Korea, the Asian Highway plan was expected to make considerable economical effects in the North-East Asian region. This study focuses on a part of AH6 route (i.e., South Korea-North Korea-China-Far East Russia) and aims to analyze the behavioral change of international passenger transport around the Korean Peninsula by assuming the non-existent North Korea land transport network connectivity. The study was performed using two main methods. First, a stated preference survey was performed to derive the actual modal share of each travel mode. Second, a disaggregate analysis was performed to develop possible mode-choice models for international passenger travel and find out the suitable choice. Based on the results of the model estimation, it is found that over 90% of the international passenger transport would be converted to land transport (rail+highway). In addition, international railroad modal share rate would be increased from 62.8% to 66.1% and international bus would be decreased from 29.6% to 21.9% as the distance lengthened (903km~1,631km).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.549-556
• /
• 2012

Longitudinal tunnels are defined as tunnels with length of over 1km. Because of Korea's topographical conditions and as safety measures for linear design, many tunnels are inevitably being constructed in Korea. The number of longitudinal tunnels constructed on expressways amounted to 104 as of the end of 2010 with a total length of 192km. Given the increasing demand for tunnels and the increasing length of tunnels, a safety evaluation of longitudinal tunnels needs to be conducted. As such, this study selected design elements, transportation environment and delineation system as elements to check and tried to determine factors influencing road crashes. For this, tunnels have been classified based on history of crashes; ones with crashes and ones without crashes and statistically meaningful explanatory variables were selected. By using these variables, a logit model was development in order to better grasp the factors that directly and strongly influence crashes. The result, related to crashes as well as the analysis were utility tunnel interior materials of driving lane and passing lane, which are related to driver's visibility, lateral width widening to consolidate space in a tunnel, and annual average daily traffic (AADT) per lane. These results may be used in the future as analysis indicators when drawing up plans to prevent crashes in longitudinal tunnels.