• Title/Summary/Keyword: road facility

Search Result 389, Processing Time 0.026 seconds

The Efficiency and Improvement of the Highway Wild-Life Fences for Decrease of Mammals Road-kill - In Case of Manjong~Hongchun Section on Jungang Highway - (포유류 로드킬 저감을 위한 고속도로 유도울타리 효율성 및 개선방안 연구 - 중앙고속도로 만종~홍천 구간을 사례로 -)

  • Song, Jeong-Seok;Lee, Kyong-Jae;Ki, Kyong-Seok;Jun, Ik-Yo
    • Korean Journal of Environment and Ecology
    • /
    • v.25 no.5
    • /
    • pp.649-657
    • /
    • 2011
  • This study had targeted the Manjong Junction~Hongchun interchange section of Jungang highway in order to analyze the efficiency and improvement of the highway wild-life fences. Being analyzed wild-life fence as an effective facility for the prevention of road-kill, it had founded that the wild animals did not jump over even the two layer guardrail, concrete barrier and noise barrier, fence for rock fall. For the section with high road-kill decrease effect after installing the wild-life fence, the effect was higher at wild-life fence with the height of 1.0m where the door had not been installed and the well connected points of road facility than the area with fence height of 1.5m. The road-kill decrease effect was also high at the well managed areas even if the door has not been installed. Also, road-kill had occurred by concentrating around the end of wild-life fence after installing the fence, Moreover road-kill had also occurred around the cutting section. The door of wild-life fence had higher amount of road-kill occurrence as the installation interval was closer. it was analyzed that the door management has a lot of effect on road-kill decrease. The fence for rock fall, two layer guardrail and concrete barrier having the effect of wild-life fence installed on the road would have to be installed by connecting with wild-life fences through proper facility improvement. Although the door should not be installed if possible, it should be installed as automatic door or gravity door to prevent the door from leaving the door open. An escape route has to be formed for the prompt escape away from the road for the animals entered through the ending section of the fence. The eco-corridor has to be made by restoring the soil layer of dual purpose eco-corridor forming a planting area. Also, the dead body after the accident has to be disposed to the outer section of the road immediately in order to prevent the secondary road-kill by the predator from the road-kill. The fence has to be installed as 500m or longer in both ways, in other words 1,000m or longer, from the targeted spot of minimum accident prevention while connecting up to the bridge or box culvert, etc that are next road facilities if possible to guide wild animals safely to the eco-corridor.

A Study on Facility Information System using GIS and Semantic Web in Underground Space

  • Cui, Yulan;Hwang, Hyun-Suk;Kim, Chang-Soo
    • Journal of Korea Multimedia Society
    • /
    • v.13 no.12
    • /
    • pp.1843-1854
    • /
    • 2010
  • The utilization of underground space has recently increased with the complication of road, the rise of the land price, and the development of green technology. Underground space ranges from classical excavations to subway, underground cities, and shopping malls where there are crowds of people. At this time, government has spent a lot of money in installing various types of safety facilities for preparations of increasing potential disasters. Therefore, an effective facility management system is required. In this paper, we propose an information retrieval process to effectively extract the facilities' information based on the ontology and spatial analysis in underground space. The ontology-based searching supports hierarchical and associated results as well as knowledge sharing with hierarchy concepts. The spatial analysis based searching has "Buffer" and "Near" functions to operate on a map without understanding any property of the facility information.

Millimeter-wave Technologies for ITS Wireless Communications

  • Fujise, Masayuki
    • Information and Communications Magazine
    • /
    • v.19 no.9
    • /
    • pp.31-42
    • /
    • 2002
  • CRL (Communications Research Laboratory, Independent Administrative Institution, Japan) is developing ITS wireless communication technologies in millimeter-wave frequency region. Technologies are categorized for inter-vehicle communications (IVC) and road-vehicle communications (RVC). In this paper, system concepts and the experimental facilities are introduced. The experimental facility for inter-vehicle communications is gotten ready in 60 GHz frequency region and the experimental system for road-vehicle communications is based on RoF (Radio on Fiber) technology in 36-37GHz frequency region.

A study on improvement of wind-resistance characteristics of the structure supporting road sign (도로표지판 지지구조물의 내풍성능 향상에 관한 연구)

  • Son, Yong-Chun;Park, Su-Yeong;Im, Jong-Guk;Sin, Min-Cheol
    • 한국방재학회:학술대회논문집
    • /
    • 2008.02a
    • /
    • pp.485-488
    • /
    • 2008
  • The structure supporting road sign is a road information facility for ensuring the safe transportation and smooth traffic. But, lots of road information facilities were damaged by the typhoon "Maemi" in 2003. Such damaged facilities should be rehabilitated and could increase economic loss by causing traffic accident. Therefore, in this study, behavior that reduce wind load and improve wind resistance of the structure supporting road sign are studied about wind load beyond design specification by abnormal climate as below. The first is wind load reducing technique such that shear key resist wind load that is not greater than design wind speed but in case that it is over the design wind limit, column member is rotated on the inner steel pipe axis by the brittle failure of shear key. The second is the technique such that fail-safe the overturning of road sign panel by equipment installation in the vertical member. The third is the technique of installing stiffening plate inside the vertical member to relieve stress concentration.

  • PDF

Estimation of spatial parameters to be included in 3D mapping for long-term forest road management

  • Choi, Sung-Min;Kweon, Hyeongkeun;Lee, Joon-Woo
    • Korean Journal of Agricultural Science
    • /
    • v.47 no.4
    • /
    • pp.727-742
    • /
    • 2020
  • Point cloud-based 3D maps can obtain many kinds of information for maintenance work on forest road networks. This study was conducted to compare the importance of each factor to select the factors required for the mapping of 3D forest road maps. This can be used as basic data for attribute information required to maintain forest road networks. The results of this study found that out of a total of 30 indexes extracted for mapping 3D forest roads, a total of 21 indexes related to stakeholder groups were significantly different. The importance of the index required by the civil service group was significantly higher than that of the other groups overall. In the case of the academic group, the index importance for cut slope, fill slope, and drainage facility was significantly higher. On the other hand, the index importance for the forestry cooperative and forest professional engineer group was mostly distributed between the civil servants' group and the academic group. In particular, the type of drainage system showed the highest value among the detailed indexes. Overall, drainage related factors in this survey had high coefficient values. The impact of water on forest roads was the most important part in road maintenance. In addition, the soil texture had a high value in relation to slope stability. This is thought to be because the texture of the soil affects the stability of the slope.

Extracting Three-Dimensional Geometric Information of Roads from Integrated Multi-sensor Data using Ground Vehicle Borne System (지상 이동체 기반의 다중 센서 통합 데이터를 활용한 도로의 3차원 기하정보 추출에 관한 연구)

  • Kim, Moon-Gie;Sung, Jung-Gon
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.11 no.3
    • /
    • pp.68-79
    • /
    • 2008
  • Ground vehicle borne system which is named RoSSAV(Road Safety Survey and Analysis Vehicle) developed in KICT(Korea Institute of Construction Technology) can collect road geometric data. This system therefore is able to evaluate the road safety and analyze road deficient sections using data collected along the roads. The purpose of this study is to extract road geometric data for 3D road modeling in dangerous road section and The system should be able to quickly provide more accurate data. Various sensors(circular laser scanner, GPS, INS, CCD camera and DMI) are installed in moving object and collect road environment data. Finally, We extract 3d road geometry(center, boundary), road facility and slope using integrated multi-sensor data.

  • PDF

A study on the Trend Analysis and Road map Design of the Facilities Disaster and Safety Technology in the Country and Oversea (국내외 인적재난 안전기술개발 동향분석 및 로드맵 수립에 관한 연구)

  • Lee, Tae Shik;An, Jae Woo;Song, Cheol Ho;Seok, Geum Cheol
    • Journal of Korean Society of Disaster and Security
    • /
    • v.6 no.3
    • /
    • pp.49-57
    • /
    • 2013
  • This paper is to show the long-term roadmap by analyzing the development trend for the safety technology of facility disaster in the country and abroad, and it is designed to plan the long term and roadmap in response to change the disaster environment. Recently in the country, it is increasing the needs of the long term roadmap design of the facility disaster research development in the facility disaster, by the repidly of the social and the living and the related governments response's changing. The U.S. is going to develop the disaster responding research by planning the its master plans, including the NRF (National Responing Framwork), the NIMS (National Incident Management System), and its sinarios etc.. Japan is going to develop the research planning in the annual report of the disaster prevention, and we going to do the study projects about the facility disaster area with the NEMA (National Emergency Management Agency) and NDMI (National Disaster Management Institute). This paper is showed to design the long term roadmap of the facility disaster's study development, and to minimize the damage of the man and his property, and to set the study development system of the national facility disaster, and furthering to make the resilient planning in changing of the facility disaster's environment.

A Study on Retroreflectivities of Pavement Markings by Freeway Facility Types (고속도로 시설물별 차선반사도 다양성 연구)

  • Oh, Heung-Un
    • International Journal of Highway Engineering
    • /
    • v.7 no.4 s.26
    • /
    • pp.173-184
    • /
    • 2005
  • Pavement markings delineate driver's sight and attentions at day and night. Retroreflectivities of the pavement markings are known to be affected by some factors such as geometrical characteristics of road sections, marking materials, traffic volumes, weather, and so on. Therefore, pavement markings would have different retroreflectivities place by place. The objective of this paper is to contend that there are rises and falls of retroreflectivity of specific geometrical characteristics of road section based on observed field data. For this purpose, retroreflectivities of yellow continued lines and white skip lines were measured on the freeway sections from Hanam to Nami interchanges. And then, the sections are categorized based on road geometric or facility types. From this study, it may be concluded that there exist considerably lower retroreflectivity trends of pavement markings at sharply curved sections, climbing lane sections, ramp sections, and tunnel sections than averaged retroreflectivity trends on freeway sections. This may leads to the necessity of differential pavement marking managements.

  • PDF

Criteria of Installing Delineators Considering Human Factors (인간공학적인 시선유도시설 설치기준에 관한 연구)

  • Park, Je-Jin;Park, Tae-Hoon;Ha, Tae-Jun
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.7 no.2
    • /
    • pp.100-109
    • /
    • 2008
  • Traffic accidents at night occur more than any other time because of improper road light facility and delineators. Therefore, cost-effective criteria of installing delineators are needed instead of expensive road light facility, especially, on rural road including light volume of traffic. This paper presents the criteria of installing 'Chevron Alignment Sign' considering driver's visual behavior characteristics and 'Raised Pavement Marker' considering critical encroachment angie of both straight section and curve one in order to reduce both the number of accidents on curve sections and the number of road encroachment accidents, respectively. The characteristics of visual behaviors can be expressed by visual angle involving curve radius and intersection angle. The estimated installing angles are $1^{\circ}{\sim}2.5^{\circ}$ by radii, which is based on changes in sensitivity across visual field by exogenous attention. Also, the raised pavement marker is installed every 2m, 3m, and 4m considering critical encroachment angles by radii.

  • PDF

A Study on the Database Design for Road Facility Management (도로 시설물관리를 위한 자료기반 설계에 관한 연구)

  • 박운용;차성렬;신상철
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.13 no.1
    • /
    • pp.21-30
    • /
    • 1995
  • As it is being changed to information society with high economic development, every kind of work is being specialized and diversified in the aspects of quantity and quality. Therefore, Geo-Spatial Information System (GSIS) is getting more important because it can integrate the attribute, the image and the written data of objects including the site one. The purpose of GSIS is to integrate such geo-spatial data as the situation of public facilities, land uses and its sketch and statistics which are scattered in every administration department. Additionally, GSIS can make users get the goo-spatial information easily through computer, and can also do it worthier. An integrated management system of transportation data is needed to improve the efficiency of road-related operations. This can be accomplished by analysing various operation about road management and the utilization of base maps. Thus, in this study, effective road facility information management system based on GSIS database was developed for the management of various types of drawings and data using in various tasks.

  • PDF