• Electrical & Electronic Materials
• /
• v.13 no.12
• /
• pp.6-9
• /
• 2000

Over the years of decades, the memory technology has progressed a long, marble way. As we have evidenced from the Intel's 1Kb DRAM in 1970 to the Gigabit era of 2000's, the road further ahead towards the Terabit era will be unfolded. The technology once perceived inconceivable is in realization today, and similarly roadblocks as we know of today mayvecome trivial issues for tomorrow. For the inquiring mind, the question is how the "puzzle"of tomorrow's memory technology is pieced-in today. The process will take place both in evolutionary and revolutionary ways. Among these, note-worthy are the changes in DRAM architecture and the cell process technology. In this paper, some technical approaches will be discussed to bring these aspects into a general overview and a per-spective with possibilities for the new memory technology will be presented.presented.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.104-109
• /
• 2002

This paper suggested the model which could calculation propagation path. It was calculation in reflection spot which was done last in line of sight according to the change of angle of incidence. And road widths and intersection angles were to be changed to consider various types of urban area. As a result, propagation path increased when angles of an intersection changed to 15$^{\circ}$~75$^{\circ}$ and attenuated to roughly 1[dB]~2[dB] than existed model. 

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.1
• /
• pp.7-17
• /
• 2010

ITS(Intelligent Transport System) as things are used for Broadcast service using TDMB/TPEG/NAVI rather than personal seamless service. It is attaching weight to Traffic information gathering, Charging, Settlement service. This research is applied to improve DCCP(Datagram Congestion Control Protocol) which has function as protecting data and preserving message boundary. The improving method is like that we solve data trust in UDP because Connection and Transmission overhead in UDP is less than in TCP. We fix the data loss which is generated from unordered delivery section of IP base wireless service by using DCCP protocol. We guarantee of connection with OBE(On-Board Equipment) and reliance about transmission of data by complement to mapping table and multi-hoping. Finally, We evaluate the performance about transmission of IP based data. We constructed a test-bed near research center for this test.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.17-20
• /
• 2000

Over the years of decades, the memory technology has progressed a long, marble way. As we have evidenced from the Intel’s 1Kb DRAM in 1970 to the Gigabit era of 2000’s, the road further ahead towards the Terabit era will be unfolded. The technology once perceived inconceivable is in realization today, and similarly roadblocks as we know of today may become trivial issues for tomorrow. For the inquiring mind, the question is how the “puzzle” of tomorrow’s memory technology is pieced-in today. The process will take place both in evolutionary and revolutionary ways. Among these, note-worthy are the changes in DRAM architecture and the cell process technology. In this paper, some technical approaches will be discussed to bring these aspects into a general overview and a perspective with possibilities for the new memory technology will be presented.

• Journal of Preventive Medicine and Public Health
• /
• v.50 no.2
• /
• pp.83-90
• /
• 2017

Objectives: The aim of this study was to model the avoidable burden of the risk factors of road traffic crashes in Iran and to prioritize interventions to reduce that burden. Methods: The prevalence and the effect size of the risk factors were obtained from data documented by the traffic police of Iran in 2013. The effect size was estimated using an ordinal regression model. The potential impact fraction index was applied to calculate the avoidable burden in order to prioritize interventions. This index was calculated for theoretical, plausible, and feasible minimum risk level scenarios. The joint effects of the risk factors were then estimated for all the scenarios. Results: The highest avoidable burdens in the theoretical, plausible, and feasible minimum risk level scenarios for the non-use of child restraints on urban roads were 52.25, 28.63, and 46.67, respectively. In contrast, the value of this index for speeding was 76.24, 37.00, and 62.23, respectively, for rural roads. Conclusions: On the basis of the different scenarios considered in this research, we suggest focusing on future interventions to decrease the prevalence of speeding, the non-use of child restraints, the use of cell phones while driving, and helmet disuse, and the laws related to these items should be considered seriously.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.143-147
• /
• 2017

In this study, a driving load measuring method has developed without utilizing WFT. To measure the driving load, we developed a three-axis load cell with a strain gage. A method to verify the performance of load cells was developed. A system to measure the input load was proposed, and it was verified by evaluation. The measurement error of the impact road surface was found to be less than 20％. However, except under impact road surface conditions, the proposed system can be applied for actual vehicle input load measurement. The influence of tire evaluation tests were carried out through the handling verification evaluation. The input load measurement methods proposed in the present study make performance verification possible without using WFT.

• Land and Housing Review
• /
• v.11 no.1
• /
• pp.109-116
• /
• 2020

This study aims to establish an approach to assess urban flood vulnerability by identifying social characteristics such as the road transportation and the vulnerable groups. Assessment procedures comprise three steps as: (1) composing the assessment criteria to reflect the urban characteristics; (2) calculating the weight; and (3) evaluating the vulnerability. The criteria were adopted by Delphi survey technique. Four criteria as land cover, residents, vulnerable areas, and disaster response were adopted in the current study. To determine the weight set of criteria, subjective and objective methods were combined. The weight set was determined using the combined method which reflects the Delphi method and Entropy analysis. In the process of data-based construction, GIS tools wwere used to extract administrative unit materials such as land cover, road status, and slope. Data on population and other social criteria were collected through the National Statistical Office and the Seoul Metropolitan statistical data. TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) technique, which uses materials from cell units in order to rank the closest distance to the best case and the farthest distance from the worst case by calculating the distances to the area of assessment, was applied to assess. The study area was the Dorimcheon basin, a flood special treatment area of Seoul city. The results from the current study indicates that the established urban flood vulnerability assessment approach is able to predict the inherent vulnerable factors in urban regions and to propose the area of priority control.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.325-331
• /
• 2016

In driving at evening or night, we are not able to recognize the speed bump and so stop suddenly. It could result in accidents. And also, we have a restriction of street light installation in farm road because it could be harmful to the crops and driver could not recognize the walking people. It needs to develop the speed bump with light and streetlight to be non harmful to the crops. So, we develop both the speed bump and streetlight with LED which could be non harmful to the crops and be increased recognition of walking people in farm road. For LED lighting power, we use the solar cells, and piezoelectric elements. It has automatic on/off according to power saving rates without illumination sensor. Minimization of circuit elements and design of minimum resisters and low power LED was used for power saving in assuring 3-days.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.101-115
• /
• 2009

The prompt recovery of housing market in Korea became the national task, for which tools that can analyze the influence that changing situation of housing market and new policy may have on the housing market needs to be developed. Thus, this research intends to develop Multi-Agent Housing Market Model and simulation system in Jinju City as a study area. Analyzing the local housing market of Jinju City, then multi-agent model of housing market that consolidates 3 sub-models, house choice model, hedonic model of house price and location choice model is developed. Moreover in order to develop simulation system the model is programmed in the virtual space of which the size is $150{\times}100$ cell including physical shape of city such as road, urban facilities, land use, etc. With the system, simulations are performed to confirm the impact of urban development on the pattern of residential location. As a result, it is found that the residential location can not be easily induced when only road, commercial and convenient facilities are supplied. However, it is also found that since supplying green results in very many residences, arrangement of infrastructure and environmental factor should be considered at the same time for urban development. As conclusion, it is confirmed that the model and simulation system developed in this research smoothly works to be utilized for the analysis of diverse policy experiment and housing market.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1281-1289
• /
• 2019

This study was conducted to evaluate the optimal operating condition of ultra-fine bubble washing machine for removing calcium chloride from road concrete structure. The diameter of the ultra-fine bubble was measured to 196.6 ± 100.6 nm and the ultra-fine bubble concentration was measured to 1.36 × 108 cell/ml. As a result of the performance on the spray device of the washing machine, it was confirmed that the washing efficiency of 93% and 91% appeared at 100cm and 150cm of injection distance at 100bar injection pressure. By increasing the ultra-fine bubble generation cycles from 2 to 6, the chloride removal rate increased from 1% to 7%. As the ultra-fine bubble generation air flow was lowered from 4 ml/min to 0.5 ml/min, it was confirmed that the washing efficiency increased up to 30%. The washing efficiency of ultra-fine bubble water was 25% higher than normal water.