• The Korean Journal of Mycology
• /
• v.51 no.3
• /
• pp.155-165
• /
• 2023

In this study, we isolated several fungal strains from filtered water and sediment collected from rivers and streams. The strains were identified by molecular phylogenetic analyses of rDNA sequences (internal transcribed spacer [ITS], large subunit of ribosomal DNA [LSU]). The morphological characteristics of the fungi were investigated using microscopy, and the culture characteristics of fungi grown on several media were examined. We identified four species previously unknown in South Korea, namely, Dissophora globulifera, Linnemannia exigua, Mortierella rishikesha and Umbelopsis autotrophica.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.99-106
• /
• 2015

To estimate the effects of suspended sediments flowing into the Saemangeum Reservoir on the extent of contamination of the reservoir, the suspended sediments were collected with sediment traps, which were installed from the upstream of the Mankyung and Dongjin Rivers to estuary of the reservoir, respectively, and the sedimentation rates and the chemical characteristics of suspended sediments were analyzed. The sedimentation rates in the Mankyung and Dongjin Rivers were ranged from 0.01~5.06 and $0.01{\sim}8.75kg/m^2/day$, respectively. Those were higher to the upstream of rivers, and were mainly affected by flood events. The concentrations of organic matters were from 3.3 to 9.6 times higher than those in the stream sediments and were higher after flood season, indicating the contaminants come from the non-point sources on the basin. The concentrations of total nitrogen and total phosphorus in the suspended sediments showed the same trend with the organic matters. These results indicate that the suspended sediments from the basin of the Mankyung and Dongjin Rivers are highly contaminated and the countermeasures to manage the sources of contamination on the basin are required to maintain the water quality of the Saemangeum Reservoir.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.199-204
• /
• 2023

Periodic assessment of reservoir capacity is essential for better water resources management and planning for the future water use. Reservoirs and water storage structures raised on the rivers are subjected to sedimentation and he sedimentation is caused by deposition of eroded sediment particles carried by the streams. Knowledge of reservoir sedimentation is important to estimate avaliable storage capacity for optimum reservoir operation and scheduling water release. In recent years, remote sensing and GIS techniques have emerged as an important tool in carrying out reservoir capacity analysis and water management. The reduction in storage capacity as compared to the original capacity at the time of reservoir impounding is indicative of sediment deposition. In this study, the application of GIS and remote sensing techniques were applied to assess the sediment deposition, losses in the reservoir storage and the revised cumulative capacity. Satellite images covering Pyodongdong reservoir were analyzed using Erdas Imagine and ArcGIS softwares.Cumulative capacities at different levels were also calculated and we estimated that the revised live storage was 84.2Mft3 in 2021 and 64.3Mft3 in 2022 while the original capacity was 22.8 and 53.6Mft3 in 2021 and 2022.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.321-335
• /
• 2023

Monitoring sediment loads in natural rivers is the key process in river engineering, but it is costly and dangerous. In practice, suspended loads are directly measured, and total loads, which is a summation of suspended loads and bed loads, are estimated. This study proposes a real-time sediment discharge monitoring system using the horizontal acoustic Doppler current profiler (H-ADCP) and support vector regression (SVR). The proposed system is comprised of the SVR model for suspended sediment concentration (SVR-SSC) and for total loads (SVR-Q_TL), respectively. SVR-SSC estimates SSC and SVR-Q_TL mimics the modified Einstein procedure. The grid search with K-fold cross validation (Grid-CV) and the recursive feature elimination (RFE) were employed to determine SVR's hyperparameters and input variables. The two SVR models showed reasonable cross-validation scores (R²) with 0.885 (SVR-SSC) and 0.860 (SVR-Q_TL). During the time-series sediment load monitoring period, we successfully detected various sediment transport phenomena in natural streams, such as hysteresis loops and sensitive sediment fluctuations. The newly proposed sediment monitoring system depends only on the gauged features by H-ADCP without additional assumptions in hydraulic variables (e.g., friction slope and suspended sediment size distribution). This method can be applied to any ADCP-installed discharge monitoring station economically and is expected to enhance temporal resolution in sediment monitoring.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.3
• /
• pp.160-166
• /
• 2007

The coarse deposit with a lower mud content adjacent to the shelf of the southern East Sea is probably a "relict" sediment deposited in response to a lower stand of sea level during the Pleistocene. The sediment that developed on the slope and in the deep sea was river-borne primarily and was secondarily reworked or redistributed by the Tsushima Warm Current from the East China Sea. The clay mineralogy of the area suggests various sources of fine-grained sediment from adjacent rivers, the Korea Strait, volcanic material from Ulleung Island, and the Japan coast. Massive sand, bioturbated mud, homogeneous mud, and laminated mud were the dominant facies found in the core sediments from the study area. The massive sand was mainly volcanic ash from an eruption on Ulleung Island (9300 yr BP) and consisted of colorless pumiceous glass and a black scoriaceous type. The sedimentation rates on the slope, based on the Ulleung-Oki ash layer, were about 10cm/ky higher than in the basin. Other than the coarse-grain sediment, the mean size of the fine sediment dominating the bioturbated and homogeneous muds in the basin and the laminated mud on the slope was 6-10 phi. This indicates a difference in the major sedimentary process: hemipelagic sedimentation in the Ulleung Basin and mass flow deposition, such as turbidite, on the slope of the southern East Sea.

• Spatial Information Research
• /
• v.10 no.2
• /
• pp.301-316
• /
• 2002

Soil Loss by outflow of water or rainfall has caused many environmental problems as declining agricultural productivity, damaging pasture and preventing flow of water. Also, validity pondage of reservoir or dam is decreased by rivers inflow of eroded soil. Revised Universal Soil Loss Equation(RUSLE) is mainly used to presume soil loss amount of basin using GIS. But, because comparison with survey data is difficult, it is no large meaning that estimate calculated soil loss amount as quantitative. This research used unit sediment deposit survey data of Bo-seong basin for quantitative conclusion of soil loss amount that calculate on RUSLE. Through comparison examination with unit sediment yield that calculate on RUSLE and unit sediment deposit survey data, we can estimate resolution far RUSLE Model. As a result, cell size of 150m was estimated by thing which is most suitable.

• Analytical Science and Technology
• /
• v.16 no.3
• /
• pp.232-239
• /
• 2003

The river sediments were collected from 4 points of Seoknam river, one point of Miho river and one point of the joining area of two rivers. For preparation of sample, three sediment samples were collected for the surface, middle and lower part of the sediment at each sampling point. The elemental concentrations were analyzed by neutron activation analysis using HANARO research reactor at Korea Atomic Energy Research Institute, and the concentrations of 30 elements were determined by the relative method using standard reference material of NIST. As a result of analysis, it was found that when the examination and prediction of contamination distribution about the site where the contamination site of river is connected to the lower river is done, the specific gravity of elements which is contained in the sediment and the speed of a current of river should be considered and also found that when the samples for concentration analysis in the river sediments are collected, for the establishment of regional representatives in samples, the range of sampling depth should be determined considering the specific gravity of elements and the speed of a current.

• Journal of the Korean earth science society
• /
• v.29 no.4
• /
• pp.328-340
• /
• 2008

To discriminate the provenance of shelf sediments in the western part off Jeju Island, the textual and elemental compositions were analyzed and compared with the sediments originating from Changjiang and Huanghe Rivers of China and the Korean (Keum) River. The sediments in the study area are composed of coarse silt with a mean pain size of $3.6{\sim}8.5{\phi}$ and their $CaCO_3$ contents ranged from 0.92 to 9.75 wt.%. The ratios of TOC over total nitrogen (TN) showed that the study area sediments contained more organic matters of marine origin than those of terrigenous origin. The high concentration of Fe/Al, Ti/Al and Mn/Al figures were found in the southwestern part near the Changjiang esturay, indicating that it seemed to result from the influence of the Changjiang River. The discrimination diagrams including Sc/Al vs Cr/Th, Th/Sc vs Nb/Co and Ti/Nb vs Th/Sc were thus used as provenance indicators to identify the sediment origins of the western part off Jeju Island. Based on these discriminated diagrams it clearly showed that most of the sediment in the western part were originated from the Huanghe River, but the sediments in the southwestern part near the Changjiang esturay might come from the Changjiang River. In contrast, the sediment samples of the northeastern part showed the higher figures than those of the river sediments and other regions, suggesting that the sediments in the western part off Jeju Island must be originated from diverse sources.

• Journal of Environmental Science International
• /
• v.19 no.8
• /
• pp.951-960
• /
• 2010

Sediment works as a resource for electric cells. This paper was designed in order to verify how sediment cells work with anodic material such as metal and carbon fiber. As known quite well, sediment under sea, rivers or streams provides a furbished environment for generating electrons via some electron transfer mechanism within specific microbial population or corrosive oxidation on the metal surfaces in the presence of oxygen or water molecules. We experimented with one type of sediment cell using different anodic material so as to attain prolonged, maximum electric power. Iron, Zinc, aluminum, copper, zinc/copper, and graphite felt were tested for anodes. Also, combined type of anodes-metal embedded in the graphite fiber matrix-was experimented for better performances. The results show that the combined type of anodes exhibited sustainable electricity production for ca. 600 h with max. $0.57\;W/m^2$ Al/Graphite. Meanwhile, graphite-only electrodes produced max. $0.11\;W/m^2$ along with quite stationary electric output, and for a zinc electrode, in which the electricity generated was not stable with time, therefore resulting in relatively sharp drop in that after 100 h or so, the maximum power density was $0.64\;W/m^2$. It was observed that the corrosive reaction rates in the metal electrodes might be varied, so that strength and stability in the electric performances(voltage and current density) could be affected by them. In addition to that, COD(chemical oxygen demand) of the sediment of the cell system was reduced by 17.5~36.7% in 600 h, which implied that the organic matter in the sediment would be partially converted into non-COD substances, that is, would suggest a way for decontamination of the aged, anaerobic sediment as well. The pH reduction for all electrodes could be a sign of organic acid production due to complicated chemical changes in the sediment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7089-7097
• /
• 2015

Bed changes in the Nakdong River were analyzed with long-term monitoring data for analyzing riverbed change patterns after Four Major Rivers Restoration Project (FMRRP). Also, possible long-term bed changes were predicted using one-dimensional numerical model for the section where the largest change was observed after FMRRP. The sensitive analysis was performed with different incoming sediment discharge conditions and sediment transport equations. The numerical model was calibrated by comparing short-term monitoring data and simulated results, and was applied for predicting bed change after 10 years. As a result of monitoring data analysis, the largest change in bed elevation occurred at the section between the Changnyeong-Haman and Hapcheon-Changnyeong weirs. The result of one-dimensional numerical modeling for 10 years indicated that maximum depositions of 2.07 m and 3.26 m were produced in this section.