• Advances in concrete construction
• /
• 제10권5호
• /
• pp.431-441
• /
• 2020

For the purpose of improving the properties of UHPC as well as the economic efficiency in production of the material, Availability of river sands as fine aggregate instead of micro silica sand were investigated. Four different sizes of river sands were considered. Using river sand instead of micro silica sand increased the flowability, and decreased the yield stress and plastic viscosity in rheological properties, and the effect was higher with larger particle size of river sand. It was demonstrated by analyses based on the packing density. In the results of compressive strength and elastic modulus, even though river sand was not as good as micro silica sand, it could provide high strength of over 170 MPa and elastic modulus greater than 40 GPa. The difference in compressive strength depending on the size of river sand was explained with the concept of maximum paste thickness based on the packing density of aggregate. The flexural performance with river sand also presented relatively lower resistance than micro silica sand, and the reduction was greater with larger particle size of river sand. The flexural performance was proven to be also influenced by the difference in the fiber orientation distribution due to the size of river sand.

• 자원환경지질
• /
• 제54권5호
• /
• pp.595-603
• /
• 2021

하천 및 육상 골재 자원의 주 대상인 모래층의 분포는 제4기 퇴적 환경 중 충적 및 하천 퇴적환경에 주로 속한다. 충청남도 금산군 일대의 골재 자원 분포는 특징적으로 감입곡류 하천이 우세한 퇴적 환경 중심으로 발달하고 있는 반면, 붕적이나 선상지성 퇴적환경에서 형성된 퇴적층은 육상 및 하천 골재 분포 비율이 상대적으로 낮다. 봉황천 주변과 소하천들이 합류하는 부근 일대는 소규모이지만 하천의 범람원이 발달하며 골재 분포 지역에 해당된다. 금산군 제4기 퇴적층의 수직 분포는 약 5~12m 범위와 평균 8m의 제4기 퇴적층 두께를 갖는다. 골재 부존 구간은 평균 3.6m 두께이며 평균 입도는 점토-실트 약 21%, 모래 67%, 그리고 자갈 12%이다. 골재 부존 구간의 주요 특징은 조립질 모래가 우세하고 자갈은 아각형 또는 아원형, 분급은 일반적으로 불량하고 괴상의 형태를 띠며 암회색~황갈색 범위의 토색을 보인다. 금산군 내에서 골재 개발 가능성이 큰 분포 지역은 금강본류, 봉황천과 소하천 지류의 현 하상과 구하상을 따라 분포하는 충적 퇴적층 및 하천 퇴적층이다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.161-164
• /
• 2002

This study was performed to find out the regression function to calculate the modulus of elasticity of concrete mixed by river coarse aggregate. The distribution of the group of core strength made a normal curve and the effect factor in the modulus of elasticity was 0.97 at the concrete compounded by river coarse aggregate.

• 한국환경복원기술학회지
• /
• 제11권3호
• /
• pp.74-86
• /
• 2008

To assessment the disturbances of the Namgang caused by dam construction, upstream area was selected for the reference reach and downstream area was selected for the comparison reach. And these reaches were surveyed and analyzed according to the assessment criteria of the river disturbances.The artificial factors of river disturbances were classified as river improvement works, dam construction and aggregate dredging. The indexes were physical factors as like epifaunal (bottom), embeddedness, velocity/depth regime, sediment deposition, channel flow status, channel alteration, frequency of riffles, bank stability, vegetative protection, riparian zone etc.The assessment results showed 46% of the assessment criteria which was serious status in dam downstream area and 89.5% of it which was excellent status in dam upstream.Finally, the results showed that physical river environment in downstream area was disturbed by the discharge control and the interception of sediment discharge by dam, consequently this disturbance give rise to impact of ecosystem in river.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.661-664
• /
• 1998

In this paper, the properties of inter-lacking block by the kind of aggregate and fineness modulus are investigated. According to the experimental results, compressive strength and flexural strength increase and absorption ratio decrease with larger fineness modulus in the range of 2.15~4.20. Flexural strength with river sand is higher than that with crushed sand by about 19%, compressive strength with river sand, that with crushed sand by about 11% and absorption ratio with river sand is smaller than that with crushed sand by abort 2%.

• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.145-151
• /
• 2014

본 연구에서는 국내에서 발생되고 있는 파이넥스 수쇄 슬래그를 콘크리트용 잔골재로써 활용하기 위한 연구의 일환으로 파이넥스 수쇄 슬래그 잔골재의 기초물성을 평가하였으며, 파이넥스 수쇄 슬래그 잔골재를 사용한 굳지않은 콘크리트의 특성, 경화된 콘크리트의 역학적 특성을 보통강도 및 고강도 영역에서 강사와 비교 평가하여 콘크리트용 잔골재로써 사용성 검토를 수행하였다. 실험결과, 파이넥스 수쇄 슬래그를 사용한 콘크리트와 강사를 사용한 콘크리트의 품질특성은 동등수준인 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.941-946
• /
• 2001

In this study, three kinds of fine aggregate (river sand, sea sand, crushed sand) were used and four different s/a (38%, 40%, 42%, 45%) were applied separately to this experimental for get the conclusion written below. Regardless of kinds of fine aggregate and casting-curing condition, maximum unit weight is seen at 40% of s/a and also to be seen in case of crushed sand. It's for that specific gravity of crushed sand is bigger comparatively than river sand and sea snad's one. Compressive strength is measured river sand, crushed sand, sea sand by order of size ; Regardless of variation of s/3, casting-curing condition and age. Compressive strength recorded maximum when s/a is 42% whatever sort of fine aggregate are. As the result, according to references, the optimum s/a of underwater antiwashout concrete is 40% but in this study, from compressive strength of view, the optimum s/a of underwater antiwashout concrete is 42%.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3719-3725
• /
• 2012

최근, 건설공사의 급증으로 인한 양질의 하천모래의 고갈로, 콘크리트용 대체골재로서 바다모래, 부순모래 및 순환잔골재 등의 사용이 증가하고 있다. 그러나, 미세척 바다모래는 함유된 염화물로 인하여 철근콘크리트 구조물에 사용할 경우, 철근부식 유발로 구조물의 내구성에 악영향을 미치고, 부순모래는 미립분이 많고 입도조정이 어려워서 철근콘크리트 구조물에 널리 사용되지 못하고 있는 실정이다. 한편, 낙동강 세사는 낙동강 중 하류에 대규모로 분포하고 있고, 입도를 제외하면 콘크리트용 잔골재로서 품질이 우수하므로 이에 관한 연구가 시급히 요구되고 있다. 따라서 본 연구의 목적은 콘크리트 잔골재로서 낙동강 세사를 적극적으로 활용하기 위하여 그것의 물성을 평가하는 것이다. 이를 위하여 낙동강 본류 대표위치별로 시료를 채취하여 이들의 절건밀도, 입도, 단위용적질량 등의 물성을 평가하였는데, 그 결과 낙동강 세사는 입도를 제외하면 잔골재로서의 물성이 우수한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.417-422
• /
• 2001

The purpose of this study is to investigate experimentally the workability, compressive and flexural strength properties of rapid-set concrete with various mixture. The kinds of fine aggregate(river sand, sea sand, crushed sand), water-cement ratio(40%, 45%, 50%), sand-aggrega to ratio(33%, 36%, 39%) were chosen as the experimental parameters. Test variables are temperature of concrete, slump, air contents, compressive and flexural strength. The compressive and flexural strength for 3 hours and 6 hours were tested. As result, it was shown that temperature of concrete involved 45$^{\circ}C$, some time later decreased. The workability were decreasing in steps as the sand-aggregate ratio increased and crushed sand was the highest value. Higher compressive and flexural strength was shown following the order of river sand, sea sand, crushed sand regardless of sand-aggregate ratio. But the values of gap was just a little.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.76-82
• /
• 1997

Recently as the development of a large-scale ocean structure or ocean is in progress, the importance of underwater concrete construction came to the fore. However, a problem with this underwater concrete construction is the segregation of cement and aggregate occurs when concrete is poured into the underwater. However, recently as an adhesiveness of the constituents of fresh concrete is increased even in our country, antiwashout concrete admixture were developed. The antiwashout concrete admixture can reduce the segregation significantly. Although this antiwashout underwater concrete is superior to the traditional underwater concrete in terms of durability, watertightness, stability, etc. But it is still unsatisfied due to the lack of criterion or construction experiences. Furthermore, because of an insufficiency of natural aggregate, the development of replacing aggregate came to be necessary. Accordingly, the purpose of this study is to investigate the feasibility of sea sand as a replacing aggregate and the characteristic change of antiwashout underwater concrete using river sand, sea sand, and blended sand (river sand:sea sand=3:7) through experimental researches.