• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.59-64
• /
• 2018

As part of measures to reduce fine dust, the government is promoting a project to convert the fuel of Yard Tractors(YT, tractors operated at ports), from diesel to LNG (Liquefied Natural Gas). While a port having a small number of yard tractors, it is not proper to construct a stationary LNG fueling station and supply LNG to YT due to a problem of BOG (Boil off gas) generation. Therefore, it is necessary to make a regulation and a standard on mobile LNG YT refueling station installation and inspection as an alternative. In this study, we have investigated domestic and foreign mobile LNG refueling cases and refueling standards, including the USA and Europe. In addition, we have suggested the risk reduction method according to the cause after investigation of the cause of LNG accidents. And last, based on the proposed risk reduction measures, we have proposed an amendment to the Regulation of the Urban Gas Business Law in Korea. The proposed mobile LNG YT refueling amendment of the Regulation includes ; maintenance of the safety distance from the protection facility, installation of an interlock device to prevent refueling in places other than the authorized place, installation of the identification system through biometrics, separation of the tank lorry and tow vehicle before refueling, checking the wheel fixed status of tank lorry before refueling, construction of the impounding area, safety measures before, during and after refueling, etc. The safety standards proposed in this study could be used as a reference in establishing standards for mobile LNG vehicle refueling in the near future.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.64-69
• /
• 2012

The concept of SIL is applied in the most of all standards relating to functional system safety. However there are problems for the people to apply SIL to their plants. as these standards don't include sufficient informations. In this regards, this paper will suggest the direction of SIL application and concept based on IEC 61508 and IEC 61511. A Safety Integrity Level(SIL) is the discrete level(one out of possible fours), corresponding to a range of the probability of an E/E/PE (Electric/Electrical/Programmable Electrical) safety-related system satisfactorily performing the specific safety functions under all the stated conditions within a stated period of time. SIL can be divided into the target SIL(or required SIL) and the result SIL. The target SIL is determined by the risk analysis at the analysis phase of safety lifecycle and the result SIL is calculated during SIL verification at the realization phase of safety lifecycle. The target SIL is determined by the risk analysis like LOPA(Layer Of Protection Analysis), Risk Graph, Risk Matrix and the result SIL is calculated by HFT(Hardware Fault Tolerance), SFF(Safe Failure Fraction) and PFDavg(average Probability of dangerous Failure on Demand). SIL is applied to various areas such as process safety, machinery(road vehicles, railway application, rotating equipment, etc), nuclear sector which functional safety is applied. The functional safety is the part of the overall safety relating to the EUC and the EUC control system that depends on the correct functioning of the E/E/PE safety-related systems and other risk reduction measures. SIL is applied only to the functional safety of SIS(Safety Instrumented System) in safety. EUC is the abbreviation of Equipment Under Control and is the equipment, machinery, apparatus or plant used for manufacturing, process, transportation, medical or other activities.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.141-149
• /
• 2018

In a PCB factory, there is a corrosive chemical substance supply system that can causes major leakage accidents. These accidents can give rise to shut down the factory and do residents damage that cause enormous loss of properties. To mitigate these risks, it is necessary to provide a chemical disaster prevention system. Moreover, after considering the situation and environment of the production site, it is of great importance to build an optimal chemical accident prevention system by reflecting risk reduction measures from the point of process design and by assessing quantitative risk based on reliability data. However, because there was no established database of the reliability about facilities and equipment that can be used in the domestic, the business site and consulting organization had being used the reliability data such as USA CCPS(Center for Chemical Process Safety). In these days, Korean institutes are studying on reliability data utilization method of quantitative risk assessment for preventing chemical accidents and domestic utilization algorithms and storage bed of reliability data. This study presents samples of reliability database about the chemical substance supply system that constructed from the history data such as failure, maintenance for 10 years at a PCB factory. Also, this work proposes the safety design criteria for supply facilities of corrosive chemical substance by assessing quantitative risk on the basis of the reliability data.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.3
• /
• pp.300-311
• /
• 2024

This study quantitatively analyzes risks of industrial incidents to fisher on overseas tuna purse seiners and long liners. A Bayesian network is employed to analyze 478 cases of industrial incidents, comprising 401 cases from purse seiners and 77 cases from long liners, reported from 2019 to 2022. The highest risk of industrial incidents on purse seiners is attributed to diseases. Excluding diseases, risks are the highest during fishing: 5.31 times higher during catch handling, 2.05 times higher during maintenance, and 2.38 times higher during loading and unloading. The risk of industrial incidents caused by the hull is 9.50 times higher than those caused by fishing gear, 4.59 times higher than those caused by machinery, and 3.61 times higher than those caused by the caught fish. Among the types of industrial incidents, slips are the highest: 2.58 times higher than industrial incidents caused by being bump, 3.74 times higher than those caused by hit, and 3.94 times higher than those caused by imbalance and overexertion. For long liners, most industrial incidents are concentrated in diseases, with dental, musculoskeletal, skin, and respiratory diseases being the primary types of industrial incidents identified. This study aims to propose reduction measures for reducing the high-risk form of industrial incidents, specifically slips, and to present health management strategies for preventing diseases among fisher on overseas tuna fishing vessels. By addressing these aspects, this study seeks to contribute to the safety and sustainability of the overseas tuna fishing industry.

• Research in Community and Public Health Nursing
• /
• v.16 no.2
• /
• pp.167-176
• /
• 2005

Purpose: The purpose of this study was to identify factors to predict of condom use for the prevention of sexually transmitted diseases (STDs) among sex workers in a Korean community. The theoretical ground of this study was the Interaction Model of Client Health Behavior. Method: A descriptive, cross sectional and retrospective research design was employed in this study. A total of 100 sex workers who take a clinical check-up on STDs regularly at W Public Health Center were recruited by convenient sampling, and with consent to participate in this study. All of the measures were piloted, and the reliability of each scale ranged from 0.7 to 0.9. Data were analyzed using discriminating function analysis with SPSS-PC. Results: Five independent measures (partner preference for using condoms, subjects desire to prevent STD, age, type of relationship and sexual self-determination) contributed significantly to the best discriminating function. The discriminating function analysis resulted in correct classification of 83.1% of the respondents into their corresponding groups. Conclusion: Condoms are a main means of STDs prevention. Risk-reduction interventions that enhance communication skills and intrinsic motivation will be effective in increasing condom use to prevent STDs among sex workers.

• Preventive Nutrition and Food Science
• /
• v.5 no.1
• /
• pp.58-64
• /
• 2000

Obesity is a global pandemic that is increasing throughout most of the world. Increases in obesity are not restricted to highly industrialized countries, but have been observed in newly developed and developing countries as well. Obesity is associated with increased risk for non-insulin dependent diabetes mellitus, coronary artery disease, and some types of cancer. Tragically, eliminating food shortages in developing countries may result in substituting heart disease, diabetes, and cancer for malnutrition. There are many approaches to reducing obesity, including dietary modification, surgical interventions, and drug therapies. However, only dietary modification has the potential to be effective on a global scale. Public health measures in the United States have sought to reduce obesity by reducing the intake of dietary fat. While these efforts have succeeded in reducing dietary fat, obesity has continued to increase, suggesting that moderate fat reduction may not be effective. Other proposed diets include low-carbohydrate diets, low glycemic index diets, and very low fat diets. While all of these diets may be effective for some people, they are not satisfactory for public health policy. In fact, the ratio of fat to carbohydrate may not be as important as previously believed. Humans may be well suited to adapt to diets as varied as a high carbohydrate tropical diet consisting mostly of fruits to the high fat Eskimo diet consisting largely of animal foods. Either extreme may be healthful if providing adequate, but not excessive, energy and adequate amounts of micronutrients. Public health measures may need to focuss on reducing the overconsumption of inexpensive and convenient foods.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.3
• /
• pp.537-552
• /
• 2024

Domestic nuclear power plants operate under the establishment of the "Information System Security Regulations" in accordance with the Nuclear Safety Act, introducing and implementing a cybersecurity system that encompasses organizational structure as well as technical, operational, and managerial security measures for assets. Despite attempts such as phased approaches and alternative measures for physical protection systems, the reduction in managed items has not been achieved, leading to an increased burden on security capabilities due to limited manpower at the site. In the main text, an analysis is conducted on Type A1 assets performing nuclear safety functions using Maintenance Rules (MR) and EPRI Technical Assessment Methodology (TAM) from both a maintenance perspective and considering device characteristics. Through this analysis, approaches to re-evaluate the impact of cyber intrusions on asset functionality are proposed.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.445-453
• /
• 2021

CT scan is reported to have a high risk of cancer due to a relatively high dose among medical radiological examinations. In particular, exposure to radiation to the breast, which is sensitive to radiation, is inevitable during a chest CT scan for female patient. In this study, the dose reduction effect of wearing a compression band during chest CT scans in women was evaluated, and the lifetime attributable risk due to the effective dose exposed during the CT scan was estimated. As a result, when the compression band was used, the effective tube current decreased as the outer perimeter of the chest became smaller, and it was analyzed that the CT dose index and effective dose were also reduced. In addition, the lifetime attributable risk by chest CT scan was found to reduce the cancer risk by 3.2 per 100,000 for all cancers, 0.2 per 100,000 for solid cancer, and 0.8 per 100,000 for breast cancer, based on women in their 30s when using a compression band. It is judged that the risk of cancer can be reduced through the use of appropriate scan parameters and dose optimization measures such as compression bands for future CT examinations.

• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.391-401
• /
• 2010

A reduction in risk of occupational exposure to chemical hazards within the workplace has been the focus of attention both through industry initiatives and legislation. The aims of this study were to develop an exposure matrix by industry and process, and to apply this matrix to control the risk of occupational exposure to Dichloromethane (DCM). The exposure matrix is a tool to convert information on industry and process into information on occupational risk. The exposure matrix comprised industries and processes involving DCM, based on an exposure database provided by KOSHA (the Korean Occupational Safety and Health Agency), which was gathered from a workplace hazards evaluation program in Korea. The risk assessment of the exposure matrix was performed using Hallmark risk assessment tool. The results of the risk assessment were indicated by a Danger Value (DV) calculated from the combination of hazard rating (HR), duration of use rating (DUR), and risk probability rating (RPR) of exposure to the chemical, and were divided into four control bands which were related to control measures. The applicability of the risk assessment of the exposure matrix was evaluated by a field study, and survey of the employees of the exposure matrix groups. Among 45 industries examined, this study found that greater attention should be paid to two industries: the manufacture of other optical instruments and photographic equipment, and the manufacture of printing ink, and to one process among 47 examined, the packing process in the manufacture of printing ink, because these were regarded as carrying the highest risk. This tool of a risk assessment for the exposure matrix can be applied as a general exposure information system for hazard control, risk quantification, setting the occupational exposure limit, and hazard surveillance. The exposure matrix includes workforce data, and it provides information on the numbers of exposed workers in Korea by agent, occupation, and level of exposure and risk.

• Wind and Structures
• /
• v.26 no.1
• /
• pp.45-56
• /
• 2018

Wind damage of urban trees arises to be a serious issue especially in the typhoon-prone areas. As a family of tree species widely-planted in Southeast China, the structural behaviors of Plane tree is investigated. In order to accommodate the complexities of tree morphology, a fractal theory based finite element modeling method is proposed. On-site measurement of Plane trees is performed for physical definition of structural parameters. It is revealed that modal frequencies of Plane trees distribute in a manner of grouped dense-frequencies; bending is the main mode of structural failure. In conjunction with the probability density evolution method, the fragility assessment of urban trees subjected to wind excitations is then proceeded. Numerical results indicate that small-size segments such as secondary branches feature a relatively higher failure risk in a low wind level, and a relatively lower failure risk in a high wind level owing to windward shrinks. Besides, the trunk of Plane tree is the segment most likely to be damaged than other segments in case of high winds. The failure position tends to occur at the connection between trunk and primary branches, where the logical protections and reinforcement measures can be implemented for mitigating the wind damage.