• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.64-77
• /
• 2015

An effective method for produce munitions effectiveness data is to calculate weapon effectiveness indices in the US military's Joint Munitions Effectiveness Manuals (JMEM) and take advantage of the damage evaluation model (GFSM) and weapon Effectiveness Evaluation Model (Matrix Evaluator). However, a study about the Range Safety that can be applied in the live firing exercises is very insufficient in the case of ROK military. The Range Safety program is an element of the US Army Safety Program, and is the program responsible for developing policies and guidance to ensure the safe operation of live-fire ranges. The methodology of Weapon Danger Zone (WDZ) program is based on a combination of weapon modeling/simulation data and actual impact data. Also, each WDZ incorporates a probability distribution function which provides the information necessary to perform a quantitative risk assessment to evaluate the relative risk of an identified profile. A study of method to establish for K-Range Safety data is to develop manuals (pamphlet) will be a standard to ensure the effective and safe fire training at the ROK military education and training and environmental conditions. For example, WDZs are generated with the WDZ tool as part of the RMTK (Range Managers Tool Kit) package. The WDZ tool is a Geographic Information System-based application that is available to operational planners and range safety manager of Army and Marine Corps in both desktop and web-based versions. K-Range Safety Program based on US data is reflected in the Korean terrain by operating environments and training doctrine etc, and the range safety data are made. Thus, verification process on modified variables data is required. K-Range Safety rather than being produced by a single program, is an package safety activities and measures through weapon danger zone tool, SRP (The Sustainable Range Program), manuals, doctrine, terrain, climate, military defence M&S, weapon system development/operational test evaluation and analysis to continuously improving range safety zone. Distribution of this K-range safety pamphlet is available to Army users in electronic media only and is intended for the standing army and army reserve. Also publication and distribution to authorized users for marine corps commands are indicated in the table of allowances for publications. Therefore, this study proposes an efficient K-Range Safety Manual producing to calculate the danger zones that can be applied to the ROK military's live fire training by introducing of US Army weapons danger zone program and Range Safety Manual

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.4
• /
• pp.399-403
• /
• 2005

Coccidioidomycosis is caused by a dimorphous fungus, Coccidioides, which consists of two species, C. immitis and C. posadasii. Although these organisms are genetically distinct and do not exchange DNA, they appear identical phenotypically and the disease or immune response to the organisms is also identical. Coccidioides grows as a mycelium in the soil and is mainly found in Southwestern United States, northwestern Mexico, and Argentina. An infection usually results from inhaling the spores of the fungus in an endemic area. Patients with a localized infection and no risk factors for complications often require only a periodic reassessment to demonstrate the resolution of the self-limited process. However, patients with extensive spread of infection or high risk of complications as a result of immunosuppression or other preexisting factors require a variety of treatment strategies such as antifungal therapy, surgical debridement, or both. Korea is not endemic area of a coccidioidomycosis. We report a case of disseminated coccidioidomycosis involving the lung and skin, which was detected incidentally after sunburn in a 69 year-old Korean male with diabetes mellitus and iatrogenic Cushings syndrome, with a review of the relevant literature.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.3
• /
• pp.579-599
• /
• 2014

The purpose of this study was to identify the trends and risk of bias of research using time series analysis on health and welfare in Korea and to suggest a direction for future health and welfare research. The database searches identified 6,543 papers. Following the process for screening and selecting, a total of 91 papers were included in the systematic review. There has been a steady increase in the number of articles using time series analysis from 1987 to 2013. Time series analysis was applied in medicine and health science journals. The main goals were explanation and description. Most of the subjects were heath status and utilization of healthcare services. The main model used in the time series analysis was ARIMA followed by time series regression. The data were gathered from various sources, including the national statistical office and government agencies. For assessing risk of bias, some studies were found to have inadequate sample sizes or showed no time series graphs and plots. These findings suggest greater widespread utilization of time series analysis in the field of health and welfare and to use the appropriate analysis methods and statistical procedures to obtain more reliable results to improve the quality of research.

• Journal of Society of Preventive Korean Medicine
• /
• v.12 no.2
• /
• pp.61-72
• /
• 2008

Objectives : The aim of this study was to evaluate effects of herbal medicine and other associated factors for abnormal liver function tests(especially total bilirubin, AST, ALT, and ${\gamma}$GT) levels in outpatients at an oriental medical clinic. Methods : A cross-sectional study based on clinical records was conducted on 504 patients at one Oriental medical clinic in Seoul, Korea. They were tested a liver function tests for screening and 497 patients ranging from the age of 4 to 74 were chosen for the study. Patients with basal liver disease or DM were excluded during the screening process. Patients were classified into case(abnormal) and control(normal) groups by normal liver function test references. Results and Conclusions : In this study, Significant correlations for abnormal total bilirubin levels was age, for abnormal AST was gender, for abnormal ALT were gender, smoking, marriage status, and job, for abnormal ${\gamma}$GT were age, gender, obesity, alcohol, smoking, marriage status, and job using the Chi-square test(p<0.05). There was no significant correlations for abnormal LFTs by using herbal medication history, and intake duration. After controlling other covariates, logistic regression analysis showed that the significant associated factors for abnormal total bilirubin levels were age(odds ratio[OR]=0.87, 95% confidence intervals [CI]=0.87-0.99). For abnormal AST levels was obesity(OR=2.45, CI=1.2-4.9), for abnormal ALT levels were age(OR=1.01, CI=0.99-1.03), male gender(OR=3.31, CI=1.62-6.76), and obesity(OR=3.71 CI=2.28-6.08). For abnormal ${\gamma}$GT levels were male gender(OR=4.83 CI=1.34-17.43), obesity(OR=3.29, CI=1.74-6.22), alcohol (OR=2.51, CI=1.19-5.28), and smoking(OR=2.29, CI=1.16-4.50). Herbal medication history was not as a risk factor for all abnormal liver function tests. Therefore, people who are male, obese, alcohol drinker and smoker will have higher liver function test levels. But intake of herbal medication or the duration of intake may not be the risk factor for abnormal liver function test results.

• Journal of the Korean Institute of Gas
• /
• v.16 no.3
• /
• pp.22-28
• /
• 2012

For a methanol separation column of the BPA (Bisphenol A) plant, HAZOP (hazard and operability) assessment was performed and damage ranges were predicted from the accident scenarios for the fire and the explosion. As a result, the damage range of the jet fire was 20 m in the case of rupture of the discharge pipe (50 mm diameter) of safety valve, and that of the flash fire was 267 m in the case of catastrophic rupture. Also, the damage ranges of the unconfined vapor cloud explosion (UVCE) for the rupture of the discharge pipe and for the catastrophic rupture were 22 m and 542 m, respectively. For the worst case of release scenarios, safety measures were suggested as follows: the pressure instruments, which can detect abnormal rise of the internal pressure in the methanol separation column, should be installed by the 2 out of 3 voting method in the top section of the column. Through the detection, the instruments should simultaneously shut down the control and the emergency shut-off valves.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.145-152
• /
• 2006

Industry development caused numerical and quantitative increase of noxious chemical substances that contain risk assessment in water resources. For use of efficient water resources a pre-treatment of contaminant source which is flowed in water resources is recognized in essential process. Therefore, the discharged water quality from discharged company began to control contaminant by total amount of pollutant in domestic. However, to estimate closely chemical substances it is not proved up to now, monitoring is very important. This study achieved a monitoring of micro noxious chemical substance by fiber and chemistry industrial wastewater inflow to examine risk assessment of the water system of Nakdong river. Chloroform was measured highest among volatile organic compounds (VOCs) that the results of water quality of influent and effluent are detected from 7 companies of study area. The other side, because measured value of detected chloroform is indefinite detection level in the same company, it is difficulty in management of water quality. However it may not be much effects of the water system of Nakdong river because these company's effluent is high treatment efficiency of chloroform (more than 88%) in sewage treatment plant. On the other hand, in the investigated results for the European Union specified priority substance that is detected to relationship influent and effluent from fiber/chemistry associated industries, these substances were not detected and domestic data was hardly referred. Therefore, data construction of continuous monitoring about this water quality may have to be achieved certainly to utilize as country policy.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.570-577
• /
• 2019

Purpose: The purpose of this study is to develop a system that enables quick on-site response using real-time decision-making by sharing the results of measurement and management performed in the field for safe temporary construction. Method: It is possible to take preemptive responses during construction by identifying the safety factors of construction conditions from measurement results and determining the risk factors such as soil properties and variability of climate change that can occur during construction by simultaneously using the back analysis method reflected in the measurement system and structural review. Result: we developed a back analysis algorithm of the SUNEX program to cope with the discrepancies between the design results and measured results due to inconsistency between site conditions and design properties, unexpected loads, and outdoor environment. The process of matching the measurement result with the analysis result can be confirmed in the safety management system. Conclusion: Gateway was used to communicate with real-time measurement results and safety management system program. It was made possible to preemptively respond to risk factors that may occur in the field.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.33-39
• /
• 2016

With recent advances in sensor technology, CMOS-based semiconductor devices and networking protocol, the areas for application of wireless sensor networks greatly expanded and diversified. Such diversification of uses for wireless sensor networks creates a multitude of beneficial possibilities for several industries. In the application of wireless sensor networks for monitoring systems' data transmission process from the sensor node to the sink node, transmission through multi-hop paths have been used. Also mobile sink techniques have been applied. However, high energy costs, unbalanced energy consumption of nodes and time gaps between the measured data values and the actual value have created a need for advancement. Therefore, this thesis proposes a new model which alleviates these problems. To reduce the communication costs due to frequent data exchange, a State Prediction Model has been developed to predict the situation of the peripheral node using a geographic autocorrelation of sensor nodes constituting the wireless sensor networks. Also, a Risk Analysis Model has developed to quickly alert the monitoring system of any fatal abnormalities when they occur. Simulation results have shown, in the case of applying the State Prediction Model, errors were smaller than otherwise. When the Risk Analysis Model is applied, the data transfer latency was reduced. The results of this study are expected to be utilized in any efficient communication method for wireless sensor network monitoring systems where all nodes are able to identify their geographic location.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.179-186
• /
• 2019

Based on the characteristics of the weapon system, a government-funded research institute or a defense industry company is selected as the R&D supervision institution. On the other hand, research for the selection of a R&D supervision institution has not been conducted actively. This paper proposes a methodology for selecting R&D supervision institutions, such as procedure and indices. First, candidates of the index were obtained using data investigation and consulting, and five indices were deduced using Delphi. The weight of the indices was set using AHP. The high element consisted of 'Technical elements' and 'Business element'. The low element of 'Technical elements' consisted of 'Possession and readiness of critical technology' and 'Experience of similar R&D'. The low element of 'Business element' consisted of 'Base circumstance of the project', 'Risk management', and 'Will for the project'. The total weights of the indices were 'Possession and readiness of critical technology' 0.405, 'Experience of similar R&D' 0.297, 'Base circumstance of the project' 0.124, 'Risk management' 0.127, and 'Will for the project' 0.047. The indices were applied to the 00 weapon system and the result was deduced.

• Journal of the Korean Society of Radiology
• /
• v.13 no.5
• /
• pp.729-737
• /
• 2019

Fatty pancreas is an abnormal process of lipid deposition in cells, resulting in increased fat tissue and obesity. The result is a risk factor for cardiovascular and metabolic diseases. The aim of this study was to evaluate the usefulness of pancreatic fat as a predictor of cardiovascular disease and metabolic syndrome in pancreatic ultrasonography. In 407 patients who underwent a comprehensive screening at the W Health Care Center in Busan from September 2. 2018 to December 31, 2018, the degree of fat deposition in the pancreas was evaluated as the degree of mild, moderate. Data on non-obstructive atherosclerosis, BMI, hyperlipidemia, hypertension, and diabetes were collected to assess the association of pancreatic fat deposition with cardiovascular disease and metabolic syndrome. In addition, we tried to analyze the correlation between liver dysfunction and thyroid dysfunction as the degree of fat pancreas increased. We examined the relationship between six parameters including atherosclerosis, BMI, hyperlipidemia, hypertension, diabetes, liver dysfunction, and thyroid dysfunction among patients with fatty pancreas. We concluded that the carotid intima-media thickness of atherosclerosis, which is a risk factor of cardiovascular disease, is most closely related to fatty pancreas.