• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.907-910
• /
• 1992

This paper deals with the mesurement and the analysis by means of EMTP simulation for the fast-rising switching surges. The fast-rising surges having up to 180ns of front time and 3.42 p.u of peak value were measured at the 154KV substations. The fast-rising surges are expected to cause electric breakdown because the penetrating surges to the transformers result in the higher stress in the winding end than the average stress along the winding.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.274-277
• /
• 1994

This paper describes a very fast rising high voltage pulse generation for studying surge phinomenon and prebreakdown of liquid dielectric by appling the traveling wave theory of the distributed circuit. This very fast rising high voltage pulse generator consists of a charging coaxial cable, a discharging switch, and a terminating resistance. As results, the rising time of pulses are about 31(nsec), which is very fast, and its duration is 950[nsec] when using 200[m] coaxial cable. The length of the coaxial cable and changing voltage can regulate the duration and the amplitude or the polarity of the pulse. When terminated the resistance, capacitor and inductor, the measured waveform corresponds with simulated waveform.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.75-81
• /
• 2000

To provide the appropriate direction for development of transient control in a gasoline engine, transient performance analysis and evalution under four accelerating types based on typical driver's acceleration type were implemented by experimental study. In order to evaluate the characteristics of transient performance quanititatively, the concept and method by transient response specifications were introduced. Several performance parameters in terms of engine speed(RPM), manifold absolute pressure(MAP), fuel injection duration($\DeltatI_{nj}$) and air excess ratio($\lambda$) were emasured simultaneously during the four types of the throttle valve opening with the step motor controlled by PC. The result showed that transient response specifications in terms of delay time, rising time and settling time characterized the transient performance for four acceleration types quantitatively. Intensified acceleration type was most economical and linear acceleration type revealed the best emission performance.

• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.1004-1008
• /
• 2012

The effect of address discharge characteristics by selective reset method is investigated to prevent the weakness of address discharge in the middle of a TV-field without increase of the black luminance. To reduce black luminance in AC PDP usually, the first subfield during one TV frame adopted the conventional rising ramp-reset waveform, whereas the other subfields adopted the subsidiary reset waveform without rising ramp type. As the wall charge for the address discharge was accumulated by only the rising ramp waveform during the first reset period, the wall charge on three electrodes was disappeared as time passed and the address discharge would be weakened in the rear subfields. To prevent a reduction of the address discharge characteristics without decrease the black luminance, the modified rising ramp reset waveform was adopted only in the sixth subfield. As a result, a modified driving method could improve the address discharge characteristics compared with selective reset driving scheme with almost the same black luminance.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권1호
• /
• pp.66-72
• /
• 2016

The aim of this paper is to investigate the characteristics of the signal of local ice load acting on side shell in the bow part due to ice broken by an icebreaker in ice-covered waters. The Korean icebreaking research vessel "ARAON" voyaged to the Arctic Ocean during the summer of 2010, and measurements of local ice load were carried out using several strain gauges. In this study, the time history of measured signals was analyzed and the characteristic values including rising time and half-decaying time were presented using non-dimensional parameters.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권9호
• /
• pp.449-458
• /
• 2006

In general, a DC solenoid valve is evaluated by the performances such as the attraction force at maximum and minimum strokes, temperature rising, power consumption and time of action. The importance of each performance may be different according to the specific application purpose. When the temperature rising and power consumption are fixed, however, the performance of DC solenoid valve is usually evaluated by the attraction force at maximum and minimum strokes and time of action. In this paper, the shape of the pole face of plunger and core is optimized to increase the attraction force at maximum stroke, and thereby to minimize the time of action. For the shape optimization, (1+1) evolution strategy is incorporated with the response surface method(RSM) and finite element method(FEM).

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 춘계학술대회
• /
• pp.117-137
• /
• 2012

In the ALC(Autoclaved lightweight concrete) manufacturing process, if the pre-cured semi-cake is removed after proper time is passed, it will be hard to retain the moisture and be easily cracked. Therefore, in this research, we took the research by multiple regression analysis to find relationship between variables for the prediction the hardness that is the control standard of the removal time. We study the relationship between Independent variables such as the V/T(Vibration Time), V/T movement, expansion height, curing time, placing temperature, Rising and C/S ratio and the Dependent variables, the hardness by multiple regression analysis. In this study, first, we calculated regression equation by the regression analysis, then we tried phased regression analysis, best subset regression analysis and residual analysis. At last, we could verify curing time, placing temperature, Rising and C/S ratio influence to the hardness by the estimated regression equation.

• Journal of the Korean Wood Science and Technology
• /
• 제33권6호통권134호
• /
• pp.25-30
• /
• 2005

두께 50 mm 국산 소나무(Pinus densiflora Sieb. et Zucc.) 판재의 건조스케줄 개량을 위해 일반 열기 건조스케줄, 시간 기준 건조스케줄, 연속 온도상승 건조스케줄, 그리고 습구온도 조절 건조스케줄을 적용하여 최종함수율 15% 정도까지 건조한 후 각각의 건조스케줄 적용에 의한 건조특성을 비교분석하였다. 두께 50 mm 국산 소나무의 일반 열기 건조스케줄 적용실험 결과 건조속도는 0.53%/hr, 시간 기준 건조스케줄 적용에 의한 건조속도는 0.9%/hr, 그리고 연속 온도상승 건조스케줄 적용에 의한 건조속도는 2.29%/hr였으며, 습구온도 조절 건조스케줄 적용에 의한 건조속도는 1.52%/hr였다.

• 한국안전학회지
• /
• 제11권1호
• /
• pp.75-83
• /
• 1996

This paper was concerned with pool fire about many used kerosene and diesel oil. In order to know the thermal effects of kerosene and diesel oil, temperature change in the pool fire of these fuels were obtained as a variation of combustion time and the tank's height and diameter by using the data acquisition system, And fuel combustion velocity were derived as a function of the diameter and wall thickness of tanks and combustion time. As a result, when the tank's height was 15㎝, the greater diameter the higher temperature rising regardless of tank's wall thickness and fuels. But, when the tank's height is 30㎝, temperature rising was not higher than 15㎝. Also, temperature rising in the pool fire of kerosene much higher than diesel oil. Kerosene's combustion velocity was about two times faster than diesel oil. And, kerosene's combustion velocity was increased according to the increasing of tank's diameter and combustion time. But, diesel oil's combustion velocity was a little increased or not. Surrounding temperature change of tank with the pool fire was obtained temperature distribution of 0∼35℃ according to the change of tank's diameter and distance from the tank's wall.

• The Journal of Korean Physical Therapy
• /
• 제8권1호
• /
• pp.65-78
• /
• 1996

This study wan described the movement patterns when rising from supine to erect stance in the third through eighth decades. Two hundred fifty six subjects, ranging in age from 30 year to 89 were filmed while rising from a supine position. Movement patterns were classified using categorical descriptions of the action of the upper and lower extremity, head-trunk region. This study was designed to determine whether within the rising task the movement patterns of different regions of the body vary with age level and sex, to describe time by subjects to perform this task. The incidence of each movement pattern was calculated and graphed wi th respect to age level and sex. Erect standing time was increased by age increasing in beth sex group. The most common form of rising for subject in the third through fifth decades both sex usually involved symmeytrical push with upper extremity, symmetrical squat pattern with lower extremity, partial rotation pattern wi th head-trunk and symmetrical push to push and reach pattern with upper extremity, symmetri cal squat pattern with lower extremity. partial rotation with head-trunk. In the sixth through eighth decades usually involved symmetrical push to push and reach pattern with upper extremity, symmetrical squat pattern with lower extremity, partial rotation pattern with head-trunk in both sex group.