• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1479-1489
• /
• 1995

In this study, tensile strength and modulus were evaluated for a filament wound ring specimen by split disk test and compared with the theoretical values obtained by the rule of mixtures. The circumferentially wound ring specimens were prepared from 4 types of material systems. The results showed that the measured strengths of the composite systems were considerably lower than the theoretical values due to the local bending stresses around the split disk edges. for the measurement of elastic moduli of the filament wound ring specimens, the effect of friction on the strain of the ring must be taken into account. But the effect of friction between the split disk fixture and the ring specimen can be eliminated by averaging the moduli for loading and unloading state with maintaining the same crosshead rates. The measured elastic moduli of ring specimens showed very good agreement with the theoretical values.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.46-48
• /
• 1999

This paper treated the design and characteristics of high speed motor/generator with ring wound stator for the flywheel energy storage system. The most important advantages of the ring-wound motor is the slotless stator, i.e. no cogging torque, no space harmonic of air-gap flux density, etc. Because of these advantages, ring wound type motor is suitable to operate at the high speed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.87-94
• /
• 2001

Filament winding process is a comparatively simple operation in which continuous reinforcements in the form of roving are wound over a rotating mandrel. And now it is well established as a versatile method for storage tanks and pipe for the chemical and other industries. In this study, tensile strength of a filament wound ring specimens were evaluated by split disk test fixture and dress disk test fixture. The results obtained from experiments were compared with the theoretical values obtained by the rule of mixture. And the purpose of this paper is to suggest an appropriate test method for the evaluation of tensile properties of filament wound structures. The tensile strength of a ring specimens tested by the dress disk test showed better agreement with the theoretical values than of a ring specimen tested by the split disk test because the stress concentration in edges of s split disk test fixture is more severe than the that of dress disk test fixture. The results showed that the tensile strength of a ring specimen was influenced by the geometry of test fixture, the continuity of fibers, fiber-tension, fiber-end and stress concentration in specimen.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.203-207
• /
• 2000

Filament Winding Process is a comparatively simple operation in which continuous reinforcements in the form of roving are wound over a rotating mandrel. And now well established as a versatile method for storage tanks and pipe for the chemical and other industries . In this study, tensile strength of a filament wound ring specimens were evaluated by split disk test fixture and dress disk test fixture , The results obtained from experiments were compared with the theoretical values obtained by the rule of mixtures. And the purpose of this paper is the suggestion of an appropriate test method for the evaluation of tensile properties of filament wound structures .The tensile strength of a ring specimen tested by the dress disk test showed better agreement with the theoretical values than of a ring specimen tested by the split disk test because the stress concentration in edges of a split disk test fixture is more severe than that of dress disk test fixture. The results showed that the tensile strength of a ring specimen was influenced by the geometry of test fixture, the continuity of fibers, fiber-tension, fiber-end and stress concentration in specimen.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.15-20
• /
• 2000

Filament winding process is a comparatively simple operation in which continuous reinforcements in the form of roving are wound over a rotating mandrel. And it is now well established as a versatile method for storage tanks and pipe for the chemical and other industries. In this study, tensile strength of a filament wound ring specimens were evaluated by split disk test fixture and dress disk test fixture. The results obtained from experiments were compared with the theoretical values obtained by the rule of mixtures in composites . And the purpose of this paper is the suggestion of an appropriate test method for the evaluation of tensile properties of filament wound structures. The tensile strength of a ring specimen tested by the dress disk test showed better agreement with the theoretical values than that of a ring specimen tested by the split disk test because the stress concentration in edges of a split disk test fixture is more severe than that of dress disk test fixture. The results showed that the tensile strength of a ring specimen was influenced by the geometry of test fixture, the continuity of fibers, fiber-tension, fiber-end and stress concentration in specimen.

• 한국추진공학회지
• /
• 제3권2호
• /
• pp.56-65
• /
• 1999

본 연구에서는 와인딩시 공정조건의 변화가 필라멘트와인딩 복합재의 기계적 특성에 미치는 영향을 조사하였다. 와인딩시의 공정변수로는 섬유장력과 섬유엔드수를 고려하였다. 고려한 시편은 필라멘트와인딩 공법으로 제작된 링 시편으로 강화섬유는 TZ-507 탄소섬유와 IZ-40 탄소섬유를 사용하고 수지는 필라멘트와인딩용 에폭시를 사용하였다. 와인딩시 섬유장력은 0.5kgf에서 3.0kgf의 범위에서 변화시켰으며 섬유엔드수는 1엔드에서 6엔드의 범위에 서 변화시켰다. 와인딩시 섬유장력과 섬유엔드수를 변화시킨 링 시편의 섬유체적비와 기공함유율은 황산용해법을 적용하여 측정하였으며 이들 링 시편의 기계적 특성은 스프릿 디스크 시험을 통해 평가하였다. 본 연구의 수행을 통해 얻어진 결과들로 판단하면 와인딩시 섬유 장력과 섬유엔드수는 필라멘트와인딩 복합재의 섬유체적비와 기공함유율을 변화시킬 뿐 아니라 필라멘트 와인딩 복합재의 기계적 특성에도 밀접한 영향을 미친다. 따라서 필라멘트와인딩 복합재의 구조성능을 극대화하고 생산성을 향상시키기 위해서는 최적의 필라멘트 와인딩 공정조건이 적용되어야 한다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권3호
• /
• pp.107-114
• /
• 2001

Electro-mechanical battery (EMB) consists of a high-speed fly wheel with an integral motor/ generator suspended on magnetic bearings and in an evacuated housing. Permanent magnet (PM) machines as the EMB motor/ generator are a popular choice, since there are no excitation losses which means substantial increase in the efficiency. In this paper we present the comparison of conventional slotted and slotless ring-wound types, aimed at EMB and other high-speed drives. We firstly discuss the topology of each machine for this particular application. these machines are primarily designed as 1kW two-pole PM generator with the rated speed of 40000 rpm. the motoring torque of 0.51 Nm has to be enough to accelerate the flywheel to the rated speed. We then present the comparison of the open-circuit field, the armature reaction field and winding inductance. next we analyze the induced voltage and the developed torque per unit stack length and unit weight of different machines. Finally, we estimate and compare the losses and the efficiency at motoring and generating modes.

• Composites Research
• /
• 제14권2호
• /
• pp.8-12
• /
• 2001

필라멘트 와인딩 공법(filament winding process)은 회전하는 맨드렐에 로빙(roving)형태의 연속섬유를 감는 비교적 간단한 공정이다. 이것은 저장탱크, 화학용 파이프, 그리고 다른 산업에 사용되는 안정적이고 다양한 공법이다. 본 연구에서는 split disk test 치구와 dress disk test 치구에 의한 필라멘트 와인딩 링 시편의 인장강도 값을 실험에서 얻어진 결과와 혼합법칙에 의해 얻어진 이론적인 값을 비교하였다. 이 논문의 목적은 필라멘트 와인딩 구조물의 인장 특성 평가에 대한 적합한 시험법을 제안하고 있는 것이다. dress disk test 치구로 시험한 링 시험편의 인장강도는 split disk test 치구의 모서리 부분에서 발생하는 응력집중 때문에 split disk test의 시험 결과보다 이론적인 인장강도 간에 잘 근절함을 보여준다. 이 실험 결과 시험 치구의 기하학적 형상과 섬유의 연속성, 섬유 장력 그리고 시험편의 응력 집중에 영향은 받음을 알 수 있었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.249-254
• /
• 1997

ABA-type block copolymers composed of poly(L-leucine)(PLL) as the A component and poly(ethylene glycol)(PEG) as the B component were synthesized by ring-opening polymerization of L-leucine N-carboxyanhydride initiated by primary amino group located at both ends of PEG chain. A silver sulfadiazine(AgSD)-impregnated wound dressing of sponge-type was prepared by the lyophilization method. Morphological structure of this wound dressing obtained by scanning electron microscopy(SEM) was composed of a dense skin layer and a macroporous inner sponge layer. Equilibrium water content(EWC) of wound dressing was above 10%. It increased with an increased of PEO content in the block copolymer due to the hydrophilicity of PEO. AgSD release from AgSD- impregnated wound dressing in PBS buffer(pH=7.4) was dependent on PEG composition in the block copolymer. Therefore, EWC and release of AgSD can be control by PEG composition. Antibacterial capacity of AgSD-impregnated wound dressing was examined in agar plate against Pseudmonas aeruginosa and Stapplococus aruous. Cytotoxicity of the wound dressing was evaluated by studing mouse skin fibroblast(L929). From the behavior of antimicrobial releasing and the investigation of the suppression of bacterial proliferation, it was supposed that the wound dressing containing antibiotics could protect the wound surfaces from bacterial invasion to suppress the bacterial proliferation effectively. In cytotoxicity observation, cellular damage was reduced by the control led released of AgSD from the LEL sponge matrix of AgSD-medicated wound dressing. In vivo test, granulous tissue formation and wound contraction or the AgSD and DHEA impregnated wound dressing were aster than any other groups.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.472-476
• /
• 2011

본 논문은 필라멘트 와인딩 압력용기의 섬유 강도 크기 효과에 관한 이론 해석 및 시험 결과를 제시하였다. 시험 방법은 카본-에폭시로 필라멘트 와인딩된 여러 크기의 후프 링 시험이 수행되었다. 시험 결과로부터 섬유 강도의 크기 효과가 현저하게 나타남을 알 수 있었다. 해석적 방법은 와이블 최약 파손 모델과 다 단계 연속 파손 모델을 이용하여 후프 링 시험 결과와 비교하였다. 해석 결과는 시험 결과와 비교하여 현저하게 낮은 섬유 강도 값들을 나타내었다. 그러므로 길이 방향의 크기 효과를 개선한 개선형 다단계 연속 파손 이론을 제시하였다. 개선형 다단계 연속 파손 이론으로부터 구한 섬유 강도 값들은 시험 결과들과 좋은 일치를 보였다.