The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Comparison of Slotted and Slotless Ring-wound PM Brushless Machines for Electro-Mechanical Battery

EMB용 전동발전기 선정을 위한 슬롯형과 슬롯리스 Ring-wound형 영구자석 브러시리스 기기의 특성 비교

  • Published : 2001.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Electro-mechanical battery (EMB) consists of a high-speed fly wheel with an integral motor/ generator suspended on magnetic bearings and in an evacuated housing. Permanent magnet (PM) machines as the EMB motor/ generator are a popular choice, since there are no excitation losses which means substantial increase in the efficiency. In this paper we present the comparison of conventional slotted and slotless ring-wound types, aimed at EMB and other high-speed drives. We firstly discuss the topology of each machine for this particular application. these machines are primarily designed as 1kW two-pole PM generator with the rated speed of 40000 rpm. the motoring torque of 0.51 Nm has to be enough to accelerate the flywheel to the rated speed. We then present the comparison of the open-circuit field, the armature reaction field and winding inductance. next we analyze the induced voltage and the developed torque per unit stack length and unit weight of different machines. Finally, we estimate and compare the losses and the efficiency at motoring and generating modes.

Keywords

References

  1. R.F. Post et al., 'Electro-mechanical Battery Research and Development L.L. at the Nat'l Lab', 26th International Symposium on Automatic Technology and Automation, Achen, Germany, Sept. 13-17, 1993
  2. H. Hofmann, S.R. Sanders, 'Synchronous reluctance motor/alternator for flywheel energy storage systems', in IEEE workshop on Power Electronics in Transportation, October 24-25, 1996, Dearborn, Mich. pp. 199-206 https://doi.org/10.1109/PET.1996.565929
  3. P.P. Acarnley, B.C. Mecrow, J.S. Burdess, J.N. Fawcett, J.G. Kelly, P.G. Dickinson, 'Design principles for a flywheel energy store for road vehicles', In Conference Record of the 30th IAS Annual Meeting, pp. 672-678, 1995 https://doi.org/10.1109/IAS.1995.530364
  4. J.R. Hendershot Jr. The Miller, 'Design of brushless permanent-magnet motors', Oxford, 1994
  5. Z.Q. Zhu, K. Ng, and D. Howe, 'Design and analysis of high-speed brushless permanent magnet motors', Eight International Conference of Electrical Machines and Drives, pp. 381-385, September, 1997 https://doi.org/10.1049/cp:19971103
  6. Kais Atallah, Zi Qiang Zhu, David Howe, Terry S. Birch, 'Armature reaction field and winding inductances of slotless permanent-magnet brushless machines', IEEE Trans. Magn., vol. 34, no.5, pp. 3737-3744 https://doi.org/10.1109/20.718536
  7. D.E. Hesmondhalgh, MSc, PhD, CEng, MIEE, D. Tipping, BA, BSc, Phd, M. Amrani, MSc, 'Design and construction of a high-speed high-performance direct-drive handpiece', IEE Proceedings, Vol. 134, No.6, Nov. 1987
  8. Isao Takahashi, Takehisa Koganezawa, Guijia Su, 'A super high speed PM motor drive system by a quasi-current source inverter', IEEE Trans. on IAS, Vol. 30, No. 3, May/June 1994 https://doi.org/10.1109/28.293717
  9. H.Polinder, M.J. Hoeijmakers, 'Eddy-current losses in the permanent magnets of a PM machine', Eight International Conference of Electrical Machines and Drives, pp.138-142, September, 1997 https://doi.org/10.1049/cp:19971054
  10. S.M. Abu Sharkh, M.R. Harris, N. Taghizadeh Irenji, 'Calculation of rotor eddy-current loss in high-speed PM alternators', Eight International Conference of Electrical Machines and Drives, pp170-174, September, 1997 https://doi.org/10.1049/cp:19971061
  11. J.A. Haylock, B.C. Mecrow, A.G. Jack, D.J. Atkinson, 'Operation of a fault tolerant PM drive for an aerospace fuel pump application,' Eight International Conference of Electrical Machines and Drives, pp133-137, September, 1997 https://doi.org/10.1049/cp:19971053
  12. T. Fukao, 'Principles and output characteristics of super high speed reluctance generator systems', IEEE Trans. IAS, Vol. 22, 1986
  13. B.T. Merritt, R.F. Post, G.R. Dreifuerst, D.A. Bender, 'Halbach Array Motor/Generators-A Novel Generalized Electric Machine,' Lawrence Berkeley Laboratory, Univ. of California, Berkeley, CA, 94720, Feb.1995
  14. 장석명, 서진호, 정상섭, 최상규, '영구자석 Halbach 배열을 이용한 초고속 모터용 계자시스템의 구성과 특성 해석', 대한전기학회, 제48B권 제4호 pp152, 1999
  15. 장석명, 서진호, 정상섭, 최상규, 함상용, '전기기계식 배터리 시스템용 초고속 전동발전기의 설계, 제작 및 모드별 특성', 대한전기학회 제48B권 제8호 pp.400-407, 1999
  16. Lawrence W. Langley, Robert L. Fisher, 'Toroidally wound brushless DC motor', U.S. PATENT, Patent number 4547713, Oct. 15, 1985
  17. Entrico Levi, 'Polyphase motors', JOHN WILEY & SONS, 1984