• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.470-476
• /
• 1987

The system of 0.1Pb(Mg1/3N2/3)O3-yPbTiO3-zPbZrO3 piezoelectric ceramics was made in the radial model disk and ring dot type filter. The resonant frequency(fr) variations were investigated for 100 hours and the temperature range from 20$^{\circ}C$ to 100$^{\circ}C$. As the results, the morphotropic phase boundary was supposed to be the composition of 45 y 50 and 40 z 45. The best characteristic of againg effect, after 10-hours, was composed of y, z=45. The stabilized characteristic of temperature varition, to become 0.1% up to 100$^{\circ}C$, was composed of y=50 and z=40. The bandwidth was broadened with increasing the electromechanical coefficient(kp), and the filter characteristics was approached ideal mode with increasing mechanical quality factor(Qm). Kp and Qm affected combinationally on filter characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1031-1033
• /
• 2006

In this study, in order to solve these problems, a new type of electronic ballast, which is composed of rectifier, active power factor corrector, series resonant half bridge inverter and piezoelectric transformer, was proposed for driving T5 fluorescent lamp. Driving of piezoelectric transformer was carried out with input region for the ring electrode and output region for the dot electrode. A 35W (T5) fluorescent lamp was successfully driven by the fabricated ballast with piezoelectric transformer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.1-1
• /
• 2010

In this study, electrical properties of multilayer piezoelectric transformer sintered at $900^{\circ}C$ using pure Ag internel electrode was investigated. This multilayer piezoelectric transformer was fabricated as a ring-dot type. The multilayer piezoelectric transformer should have hight electromechanical coupling factor ($k_p$) and electromechanical qualiy factor ($Q_m$) in order to increase the efficiency of energy conversion between electrical and mechanical energy. The maximum values of $k_p$ and $Q_m$ showed 0.552 and 1320, respectively.

• 한국전기전자재료학회논문지
• /
• 제14권11호
• /
• pp.885-891
• /
• 2001

Ring/dot-type step-down piezoelectric transformer was manufactured by using Pb[(Mn$\sub$1/3/Sb$\sub$2/3)$\sub$0.05/Zr$\sub$0.475/Ti$\sub$0.475/]O$_3$ ceramics, which have excellent high-power piezoelectric properties. The characteristics of step-down piezoelectric transformer as a function of load resistance at output terminal was examined. Voltage gain was greatly dependent on drive frequency and load resistance, and showed maximum voltage gain at the resonance frequency. The output voltage was linearly increased as the input voltage increased. Voltage gain of the step-down piezoelectric transformer with respect to input voltage was very stable when the load resistance was in the range of 50-500 $\Omega$ .

• 한국산림과학회지
• /
• 제79권1호
• /
• pp.1-15
• /
• 1990

본 연구에서는 수간석해의 분석시간과 경비를 줄이고 정확도를 높히기 위하여 P.C용 수간석해 프로그램을 제작하였으며, 본 프로그램에 이용된 수간석해 방법과 기존방법을 비교하여 다음과 같은 결과를 얻었다. 연륜측정기로 부터 1/100mm단위로 연륜 1개씩 측정된 data가 컴퓨터에 자동입력되도록 Turbo pascal을 이용하여 프로그램 하였다. 또한 각 단판의 직경이 단면적 평균법에 의해 계산되며, Spline function에 의해 재적 및 수고가 계산되도록 Fortran 77을 이용하여 수간석해 계산프로그램을 제작하였다. 이와같이 계산된 각종 생장량은 1년, 5년 단위로 각각 출력되며 수간석해도 및 각종 생장량도가 personal computer용 dot printer로 출력가능하여 수간 석해의 결과를 보다 쉽게 이용할 수 있게 되었다. 본 프로그램에서 이용된 수간석해 계산방법과 기존방법을 비교한 결과 단면적평균법이 편심에 의한 오차를 줄일 수 있었고, 수고 및 재적계산에서 Spline함수에 의한 간곡선 추정을 이용할 경우에는 다른 함수식에 의한 생장량 계산값보다 더욱 정확히 계산 가능하였다.