• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.212-214
• /
• 2004

Hardware implemented ring buffer systems and methods are presented for the effective management of the ring buffer in TCP/IP communication. The layer interface of the ring buffer systems transfer free buffer and used buffer size information to the TCP/IP stack upper or low layer. The pointer updation interface calculates a temporary pointer from the data size which is needed by the present pointer of the ring buffer and upper or lowyer layer. The pointer manager of the ring buffer systems is responsible for saving the present pointer of the ring buffer, updating the ring buffer pointer to the new pointer, calculating the free buffer size and used buffer size of the ring buffer, and transferring the information to the upper layer. The ring buffer systems help the TCP/IP layer and TCP/IP upper or lower layer to decide the sending or receiving data size effectively. The delay of transferring data can be lowered by the ring buffer system.

• 한국전자통신학회논문지
• /
• 제15권6호
• /
• pp.1045-1054
• /
• 2020

본 논문에서는 불안정한 네트워크 환경에서 안정적으로 대용량 데이터 스트림을 전송할 수 있는 TCP/IP 기반 링 버퍼 시스템을 설계하였다. 우리가 제안한 방식에서 각 전파천문대의 백엔드 시스템으로부터 UDP 프레임으로 생성 및 출력되는 관측 데이터 스트림은 클라이언트 시스템 내의 소켓 버퍼를 경유해 대용량 링 버퍼에 UDP 패킷으로 저장된다. 이후 목적지에 해당하는 상관센터로의 안정적인 전송을 위해 해당 패킷은 TCP로 전송되고 상관센터 내의 서버 시스템은 소켓 버퍼에 수신된 패킷에 이상이 없으면 대용량 링 버퍼에 저장한다. 패킷 손실, 중복 및 순서 역전 등의 이상이 발생할 경우 TCP의 흐름 제어를 통해 패킷은 재전송되며 상관센터에 도착한 데이터는 신뢰성을 보장받게 된다. 또한 네트워크 성능 불안정으로 인한 혼잡 회피 발생 시 병렬 스트림 적용을 통해 성능 저하가 최소화될 수 있도록 하였다.

• 한국전기전자재료학회논문지
• /
• 제13권5호
• /
• pp.371-375
• /
• 2000

In this paper a new conductivity modulated power transistor called the Lateral Insulated Gated Bipolar Transistor which included n+ ring and p-channel gate is presented. A new lateral IGBT structure is proposed to suppress latch-up and to improve turn off time by imploying n+ ring and p-channel gate and verified by MEDICI. The simulated I-V characteristics at $V_{G}$=15V show that the latch up occurs at $V_{A}$=18V and 6.9$\times$10$^{-5}$ A/${\mu}{\textrm}{m}$ for the proposed LIGBT while the conventional LIGBT latches at $V_{A}$=1.3V and 1.96${\mu}{\textrm}{m}$10$^{-5A}$${\mu}{\textrm}{m}$. It is shown that turn off characteristic of new LIGBT is 8 times than that of conventional LIGBT. And noble LIGBT is not n+ buffer layer because that It includes p channel gate and n+ ring. Therefore Mask for the buffer layer isn’t needed. The concentration of n+ ring is and the numbers of n+ ring and p channel gate are three for the optimal design.n.n.n.n.

• 한국정보통신학회논문지
• /
• 제4권5호
• /
• pp.1037-1050
• /
• 2000

오늘날의 통신서비스들은 음성이나 데이터 서비스와 같은 전통적인 서비스뿐만 아니라 비디오 서비스와 같은 대량의 데이터를 전송해야만 하는 멀티미디어 서비스를 포함한다. 이러한 요구를 수용하기 위해서 BISDN(Broadband Integated Services Digital Network)이 개발되었고 이의 기반 기술로 ATM이 채택되었다. 다양한 멀티미디어 응용들 중에서 VOD(Video On Demand), 화상회의등은 데이터를 동시에 여러 목적지로 보내는 멀티캐스트 특성이 있다. 그러므로 멀티캐스트 능력은 멀티미디어 통신에서 매우 중요하다. 본 논문에서는 링망을 이용한 병렬 멀티캐스트 패킷스위치(Parallel Multicast Packet Switch with Ring Network: PMRN)에서의 분리된 HOL을 이용한 멀티캐스트 셀 스케줄링 기법을 제안한다. 이 기법은 입력버퍼의 앞단 에 멀티캐스트 셀과 유니캐스트 셀을 위한 분리된 HOL을 두고 non-FIFO방식을 사용함으로서 입력버퍼 내에서 전송 가능한 멀티캐스트 셀과 유니캐스트 셀을 동시에 스케줄링할 수 있도록 하여 입력버퍼 내에서의 지연을 감소시키고 링망과 일대일 연결 네트워크의 이용율을 높이며 스위치의 처리율을 높일 수 있다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권3호
• /
• pp.99-104
• /
• 2002

lateral insulated gate bipolar transistors(LIGBTs) are extensively used in high voltage power IC application due to their low forward voltage drops. One of the main disadvantages of the LIGBT is its scow switching speed when compared to the LDMOSFET. And the LIGBT with reverse channel structure is lower current capability than the conventional LIGBT at the forward conduction mode. In this paper, the LIGBT which included p+ ring and p-channel gate is presented at the reverie channel structure. The presented LIGBT structure is proposed to suppress the latch up, efficiently and to improve the turn off time. It is shown to improve the current capability too. It is verified 2-D simulator, MEDICI. It is shown that the latch up current of new LIGBT is 10 times than that of the conventional LIGBT Additionally, it is shown that the turn off characteristics of the proposed LIGBT is i times than that of the conventional LIGBT. It is net presented the tail current of turn off characteristics at the proposed structure. And the presented LIGBT is not n+ buffer layer because it includes p channel gate and p+ ring.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.92-98
• /
• 2000

A ring comprising a coated conductor was fabricated. A ring was made first using a biaxially textured Ni tape whose two ends were connected by means of the atomic diffusion bonding technique. Then buffer layers and a YBCO film were deposited on it. All the films were well textured as confirmed by XRD pole figures. The B-H loops, where B and H are the magnetic field at the center of the ring and the applied field respectively, were measured as a function of temperature. The persistent current density (J$_c$) flowing circularly was estimated from the remanent field of B. In the range of temperature from 72K to 20K, J$_c$ changed from zero to 2${\times}$1 0$^5$A/cm$^2$.

• Bulletin of the Korean Chemical Society
• /
• 제15권9호
• /
• pp.782-785
• /
• 1994

The dissociation kinetics of linear polyaminopolycarboxylate complexes of lanthanide ions (L$n^{3+}: Ce^{3+},\;Eu^{3+}\;and\;Yb^{3+}$) has been studied in an aqueous solution of 0.10 M (NaCl$O_4$) at 25.0${\pm}0.1^{\circ}C$ using Cu(II) ions as a scavenger. The dissociation rates of acid-catalyzed pathway decrease in the order Ln(EPDTA$)^- > Ln(DPOT)^- > In(TMDTA)^- > Ln(MPDTA)^- > Ln(EDTA)^- > Ln(PDTA)^- > Ln(DCTA)^-$ according to the present and literature data. An increase in the N-Ln-N chelate ring from 5 to 6 and substitution of two methyl groups, one ethyl and hydroxyl group on a chelate ring carbon of these ligands leads to a decrease in kinetic stabilities of the complexes. The substitution of one methyl group and cyclohexyl ring on a ring carbon, however, results in a significant increase in the kinetic stability of the resulting $Ln^{3+}$ complexes. Individual reaction steps taking place for each system, with different copper, acetate buffer concentration and pH dependence, are also discussed.

• 한국통신학회논문지
• /
• 제22권1호
• /
• pp.139-150
• /
• 1997

For high-speed networks, a new ring protocal is proposed in this paper. A ring network combined with destination removal can achieve much higher network throughput than the channel transmission rate. However, such a network exhibits fairness problems. Over a past few years, global fairness algorithms such as ATMR and Metaring have been proposed to solve such problems. But the ring access time delay and fairness in such networks are sensitive to the network parameters such as network size and traffic distribution. In addition to guaranteeing fair ring access to all nodes, there are several other important performance aspects in such networks. The one is that fairness is enforced while node throughputs are kept as high as possible. And another performance measure is access delay and more specifically Head-Of-Line(HOL) delay, i.e., the amount of time the first cell in the transmission buffer of a node has to wait before it accesses the ring. HOL delay is a mijor component in the transmission jitter of the synchronous traffic transmission. A key idea of the proposed ring protocol is to find the nodes that have much more chances to access the ring than any other nodes in the independently distributed node architecture. Since destined by many cells need to share a part of the bandwidths with the next node for the fairness in as much as performance degradation does not become critical. To investigate the performance behavior of the proposed ring protocol for various network condition,s several performance parameters wuch as ring access time delay, and throughput are compared with those of the ATMR and Metaring protocols using simulation package, SIMAN.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.188-191
• /
• 2005

Two different coverlayers which is useful for an optical buffer and a mechanical protection made of not only UV resin but also polycarbonate coversheet were prepared on small form factor optical disks. Thin coverlayer of 10 ${\mu}m$ and thick coverlayer of 80 ${\mu}m$ were fabricated. 10 ${\mu}m$-thick coverlayer was coated using UV resin material by spin coating method for the flying optical head application. On the other hand, 80 ${\mu}m$-thick coverlayer using coversheet with the resin bonding material was prepared for the non-flying optical head application. Both cases, the thickness uniformity seem to be the primary prerequisite factor, and it was analyzed. Thickness of 10 ${\mu}m$-thick UV resin coverlayer could be controlled within ${\pm}0.2m$ range and 80 ${\mu}m$-thick coversheet could be controlled within ${\pm}3{\mu}m$ range. However, the yield of such thickness tolerance was not good. New design of metal housing holder and polycarbonate outer ring was adopted to diminish the ski-jump phenomenon. Specifically, the polycarbonate outer ring was very effective to reduce the ski-jump. However, it should be careful to maintain uniform edge between disk and ring for the perfect coverlayer.

• 한국통신학회논문지
• /
• 제32권9B호
• /
• pp.589-597
• /
• 2007

In this paper, a WDM metro ring consisting of access nodes with $FT-FR^n$ (Fixed Transmitter - n Fixed Receivers) is considered. A trade-off exists between node throughput and transmission fairness because the access nodes share wavelength channels. In order to eliminate the transmission unfairness and to increase throughput, the p-persistent medium access control (MAC) protocol is proposed: each node uses an empty optical slot to transmit a packet and make it available with the extraction of a transferred packet at the source access node, called source-stripping. The local empty slot can be used to transfer a head-of-line packet in the local buffer with probability p or it is used for the next downstream nodes with 1-p. The proposed MAC protocol provides better node throughput than the non-persistent protocol and exhibits better fairness index than the 1-persistent protocol in WDM ring networks. In addition, numerical analysis shows that the proposed MAC protocol maximizes the node throughput under uniform traffic conditions. For more detailed results, we use the network simulation under Poisson and self-similar traffic. Furthermore, unpredictable traffic constructed by the combination of the former and the latter is also considered. The reasonable probability of the p-persistent protocol for a given architecture can be determined through simulation.