• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.95-97
• /
• 2003

The main purpose of this work is to investigate the performance of membranes for treatment of dyeing wastewater. The microfiltration (MF) membranes (titania-blended polysulfone & alumina) were prepared. The nanofiltration (NF) and reverse osmosis (RO) membranes were kindly supplied by the Sae-Han. In order to reuse the wastewater for dyeing, the effluents were treated by the high flux RO and the fouling resistant RO (FRM) membranes. Also, the NF membrane was used for water reuse in rinsing.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 추계 총회 및 학술발표회
• /
• pp.156-158
• /
• 1998

원자력 발전소에서 사용하는 1차 냉각수에 대해 살펴보면, 일차냉각수의 pH는 5~8 범위이며, 수질기준은 염소이온과 불소이온이 0.15 ppm, 현탁고형물 이 0.2 ppm이나 실제 농도는 기준치보다 훨씬 낮은 매우 순수한 상태로 유지된다. 다만, 핵분열 반응도를 제어하기 위해 주입되는 붕소가 수백 ppm정도, pH를 조절하기 위해 부가되는 리튬의 1 ppm정도 포함되며, 그밖에 1ppm 정도의 실리카가 포함될 수 있다. 붕산으로 포화 운전되는 이온교환 수지탑 내에서는 붕산보다 이온선택도가 낮은 실리카는 이온교환수지에 흡착되지 않기 때문에 발전소의 가동년수의 증가에 ㄷ아라 원자로 냉각제의 실리카 농도는 점차 증가하게 되었다.

• 대한환경공학회지
• /
• 제38권5호
• /
• pp.255-268
• /
• 2016

기후변화는 현재 사용되고 있는 지표수 및 지하수 등의 담수자원 외에도 새로운 수자원을 확보해야할 필요성을 증가시켰다. 해수담수화 시장은 이러한 변화에 따라서 매년 급증하고 있는 상황이며, 이에 발맞추어 2007년 해수담수화 플랜트 사업단이 국내에서 출범하였다. 2014년에 종료된 해수담수화플랜트 사업단은 증발식 해수담수화 기술에 치우친 국내 기술을 역삼투방식 해수담수화 기술로 선회할 수 있도록 이끌었다. 현재 세계 최고의 역삼투방식 해수담수화 기술 에너지 효율성은 약 $3.5kWh/m^3$ 전후로 조사된다. 기장 플랜트의 수준은 $3.8{\sim}4.0kWh/m^3$ 수준으로 비록 세계 최고 수준에는 미치지 못하나, 선두권이라 하기에는 부족함이 없는 것으로 사료된다. 한편, 세계 역삼투방식 해수담수화 기술은 평준화 수준에 이른 것으로 사료되며, 에너지 저감을 위해 새로운 기술을 개발하고자 경쟁중이다. 미래 해수담수 시장에서 경쟁할 것으로 예상되는 기술로 정삼투공정, 막증발법 등이 있으며, 이를 위해 국내에서도 정역삼투 융합공정 개발, 막증발법 및 얍력지연삼투등의 기술개발을 진행중에 있다. 이를 통하여 국내 기술수준을 $2.5kWh/m^3$까지 낮출 것으로 기대된다.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.115-125
• /
• 2020

This study was aimed to examine inorganic fouling and fouling reduction method in direct contact membrane distillation(DCMD) process. Synthetic seawater of NaCl solution with CaCO₃ and CaSO₄ was used for this purpose. It was found in this study that both CaCO₃ and CaSO₄ precipitates formed at the membrane surface. More fouling was observed with CaSO₄(anhydrite) and CaSO₄·0.5H₂O(bassanite) than CaSO₄·2H₂O(gypsum). CaCO₃ and gypsum were detected at the membrane surface when concentrates of SWRO(seawater reverse osmosis) were treated by the DCMD process, while gypsum was found with MED(multi effect distillation) concentrates. Air backwash(inside to out) was found more effective in fouling reduction than air scouring.

• Membrane and Water Treatment
• /
• 제12권1호
• /
• pp.1-9
• /
• 2021

This study optimized the chemical cleaning process of discarded RO membranes for reuse in less demanding separation processes. The effect of physicochemical parameters, including the temperature, cleaning time, pH of the cleaning solution, and addition of additives, on the cleaning process was investigated. The membrane performance was evaluated by testing the flux recovery rate and salt rejection before and after the cleaning process. High temperatures (45-50 ℃) resulted in a better flux recovery rate of 71% with more than 80% salt rejection. Equal time for acid and base cleaning 3-3 h presented a 72.43% flux recovery rate with salt rejection above 85%. During acid and base cleaning, the best results were achieved at pH values of 3.0 and 12.0, respectively. Moreover, 0.05% concentration of ethylenediaminetetraacetic acid presented 72.3% flux recovery, while 69.2% flux was achieved using sodium dodecyl sulfate with a concentration of 0.5%; both showed >80% salt rejection, indicating no damage to the active layer of the membrane. Conversely, 0.5% concentration of sodium percarbonate showed 83.1% flux recovery and 0.005% concentration of sodium hypochlorite presented 85.2% flux recovery, while a high concentration of these chemicals resulted in oxidation of the membrane that caused a reduction in salt rejection.

• 멤브레인
• /
• 제22권4호
• /
• pp.235-242
• /
• 2012

로켓 추진기관의 해체 시 발생하는 고농도 암모늄 퍼클로레이트(AP)를 액상소각 처리 후 추가로 발생하는 저농도의 AP처리를 위해 NF/RO 멤브레인 공정을 적용하였고, 이때 AP제거 특성에 영향을 미치는 인자를 도출하기 위해 다양한 수리화학적 조건에서 전량여과방식으로 실험을 진행하였다. 고체 추진제에서 추출된 용액을 GC/MS와 FTIR분석을 통해 규산염 계열의 실록산 등을 검출하였으나, 이는 극미량이 포함되어 NF/RO 멤브레인 공정에 큰 영향을 미치지 않는 것으로 판단되었다. 상대적으로 낮은 압력의 운용조건에서는 높은 압력조건과 비교하여, 회수율 증가에 따라 농축된 AP의 삼투압 기작이 투과플럭스에 영향을 미치게 되어 13~17% 가량 플럭스가 감소됨을 확인하였다. 또한 AP의 제거율은 수리화학적 운영조건의 변화(압력 및 교반 속도 등)에 따라 크게 좌우됨을 알 수 있었고, 이 경우 NF와 RO 멤브레인 제거율은 각각 10~70%와 26~87% 가량 크게 달라짐을 확인하였다. 본 논문을 통해 NF/RO 멤브레인 공정을 적용한 AP 제거 기작에서 수리화학적 운영조건의 변화에 따른 농도분극, 멤브레인 선택성 및 삼투압 영향이 중요 지배 기작이었으며, 이는 'NF/RO 멤브레인의 물질이동과 선택성'의 기존 이론적 모델과 부합하였다.

• Membrane and Water Treatment
• /
• 제5권2호
• /
• pp.73-86
• /
• 2014

Membrane fouling is a major challenge limiting the use of membrane applications. In this study high induced shear rates were utilized at the membrane surface in order to reduce the organic and inorganic scaling by using the torsional vibration of flat sheet membranes. The performances of a vibratory shear-enhanced processing (VSEP) system for the ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) membrane filtration of industrial dairy wastewater were investigated. The vibration and non-vibration methods were compared with the same membrane and operational parameters during the purification of real dairy industrial process wastewater. In the initial experiments, short-term tests were carried out in which the effects of vibration amplitude, recirculation flow rate and transmembrane pressure were measured and compared. The permeate flux, turbidity, conductivity and chemical oxygen demand (COD) reduction of dairy wastewater were investigated by using UF, NF and RO membranes with vibration and non-vibration methods. In the subsequent experiments, concentration tests were also carried out. Finally, scanning electron microscopy (SEM) revealed that the vibration method gave a better performance, which can be attributed to the higher membrane shear rate, which reduces the concentration of solids at the membrane, and the transmission.

• 멤브레인
• /
• 제1권1호
• /
• pp.5-12
• /
• 1991

Since the discovery of the Loeb-Sourirajan reverse osmosis membrane, thirty years have passed and many membrane technologies and new membranes for applications have been developed in the world. In the early stage of these developments Japan has not contributed much, but from the middle of 70ties Japan has started its own R&D projects starting from the desalination technology, and now various private industries and government ministries are actively engaging in R & D of membrane technologies in Japan. In Table 1 the chronological developments of important events of developments and projects relating membrane technologies inside and outside of Japan are introduced and their details will be explained. The first membrane technology applied in the Japanese industry was a electrodialysis(ED) process using ion-exchange membranes. These membranes were first developed in early 50ties and the Japanese government decided to use this method for concentration of sea-water to produce salt, which was then produced by solar evaporation. This development program started from 1960 by the Japan Monopoly Corp.(at that time). To apply ED process for sea-water concentration it was necessary to develop ion-exchange membranes having very low electric resistance to avoid energy loss due to Joule heat, and those having selectivity to permeate single valent ions only to avoid scale formation in the ED stacks. Three Japanese companies, Asahi Glass, Asahi Chemical and Tokuyama Soda, have succeeded to develop such membranes, and until 1971 all of the seven salt manufacturing companies had adopted ED for production of food salt.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 춘계 총회 및 학술발표회
• /
• pp.26-27
• /
• 1995

Most of synthetic polymeric membranes used in ultrafiltration, reverse osmosis and microfiltration processes are prepared by phase inversion(or phase separation) technique. In this technique, a homogeneous polymer solution is cast into thin film or hollow fiber shape and then immersed into a nonsolvent coagulant bath. The exchange of solvent and nonsolvent across the interface between casting solution and coagu!ant can make the casting solution phase-separate and form a membrane with a symmetric or asymmetric structure. Because of importance of this technique in membrane field, many investigations have been dedicated to elucidate the mechanism of membrane formation by phase inversion technique.[1-10] These investigation have suggested that the structure formation and permeation properties of phase inversion membrane depend on the variables such as the nature and content of casting solution and coagulant, temperature of casting solution and coagulant, and the diffusional exchange rate of solvent and nonsolvent etc. which can be related to the thermodynamic and kinetic properties of the casting system. The variables such as the nature and content of casting solution can also be the important factor affecting the structure formation and permeation property of the phase inversion membrane.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제3권1호
• /
• pp.35-39
• /
• 1998

An enzymatic process was developed to produce protein hydrolysater form defatted soya protein. Various unit operations were tried, and the effects of pre- and post-treatments on the product characteristics such as degree of hydroylsis (DH), free amino acid content (%FAA) and average molecular weight (MW) were investigated. The use of acid washes showed no difference in %DH. Increasing pH during pre-cooking gave lower %DH. Alkaline cooking made too much insoluble protein, thus the protein yield was too small. A better hydrolysis with more acceptable taste was obtained when the combination of Neutrase/Alcalase/Flavourzyme was used in place of Alcalase/Flavourzyme combination; Untoasted defatted soya was more effective on the proteolysis than toasted one. The MW of the evaporated and spray dried product was higher than that of undried product, due to precipitation of low-solubility components. When ultrafiltration and the product concentration carried out the product separation by reverse osmosis, the solubility and the taste of the product were improved. The difference between enzyme hydrolysate and acid hydrolysate was significant in free amino acid composition, especially in tyrosine, phenylalanine, glutamine and asparagine.