• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.111-116
• /
• 2006

In this paper, the image sensor using the a-Si:H TFT is proposed. The optimum amorphous silicon thin film is deposited using plasma enhanced chemical vapor deposition (PECVD). TFT and photodiode both with the thin film are fabricated and form image sensor. The photodiode shows that Idark is $10^{-12}A$, Iphoto is $10^{-9}A$ and Iphoto/Idark is $10^3$, respectively. In the case of a-Si:H TFT, it indicates that Ion/Ioff is $10^6$, the drain current is a few ${\mu}A$ and Vth is $2\~4$ volts. For the analysis on the fabricated image sensor, the reverse bias of -5 voltage in ITO of photodiode and $70{\mu}sec$ pulse in the gate of TFT are applied. The image sensor with good property was conformed through the measured photo/dark current.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.3
• /
• pp.214-222
• /
• 2015

The superiority of gallium nitride FET (GaN FET) over silicon MOSFET is examined in this paper. One of the outstanding features of GaN FET is low reverse-recovery charge, which enables continuous conduction mode operation of totem-pole bridgeless boost power factor correction (PFC) circuit. Among many bridgeless topologies, totem-pole bridgeless shows high efficiency and low conducted electromagnetic interference performance, with low cost and simple control scheme. The operation principle, control scheme, and circuit implementation of the proposed topology are provided. The converter is driven in two-module interleaved topology to operate at a power level of 5.5 kW, whereas phase-shedding control is adopted for light load efficiency improvement. Negative bias circuit is used in gate drivers to avoid the shoot-through induced by high speed switching. The superiority of GaN FET is verified by constructing a 5.5 kW prototype of two-module interleaved totem-pole bridgeless boost PFC converter. The experiment results show the highest efficiency of 98.7% at 1.6 kW load and an efficiency of 97.7% at the rated load.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3299-3304
• /
• 2013

Background: The Global Adult Tobacco Survey has 15 key indicators, cigarettes smoked per day (CPD) among daily smokers being one of them. The first wave of GATS in 14 countries indicated that mean CPD use is higher in women than men in India only, which is contrary to the current understanding of tobacco use globally. This study was undertaken to understand the unusual findings for mean CPD use in the GATS-India survey. Materials and Methods: Items B06a and B06b of the GATS India survey questionnaire that collected information on daily consumption of manufactured and rolled cigarettes were analyzed using SPSS software. Exclusive users were identified from these items after excluding the concurrent users of other tobacco products. Cigarette type, exclusive use and gender stratified analyses were made. Consumption of different types of cigarettes among the mixed users of manufactured and rolled cigarettes were correlated. Results: Higher mean number of CPD use among male daily-smokers was observed than their female counterparts in product specific analysis. Mean CPD as per GATS cigarette definition was higher in males than females for exclusive users but a reverse trend was observed in case of non-exclusive users. Use of manufactured cigarettes increased with increase in use of rolled cigarette among the mixed users and around half of these users reported equal CPD frequency for the both types of cigarettes. Conclusions: The anomaly in mean CPD estimate in GATS-India data was due to inclusion of two heterogeneous products to define cigarettes, variation in cigarette product specific user proportions contributing to the average and non-exclusive concurrent use of other tobacco products. The consumption pattern of cigarettes among the mixed users highlights bias in CPD reporting. Definition, analysis and interpretation of 'cigarettes per day' in the GATS India survey need to be improved by redefining cigarettes and making product specific analyses.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1827-1832
• /
• 2017

To observe the characteristics to be a resistive memory of $V_2O_5$ deposited by oxygen various gas flows and annealed, the hysteresis curves of $V_2O_5$ were analyzed. The good resistive memory was obtained from the electrical characteristics of $V_2O_5$ films with the Schottky contact as a result of electron-hole pair, and the oxygen vacancy generated from the annealing process contributes the high quality of Schottky contact and the formation of resistive memories. The balanced Schottky contacts owing to the oxygen vacancy effect as the result of an ionic reaction were formed at the $V_2O_5$ film annealed at $150^{\circ}C$ and $200^{\circ}C$ and the balanced Schottky contact with negative to positive voltages enhanced the electrical operation with write/erase states according to the forward or reverse bias voltages for the resistive memory behavior due to the oxygen vacancy.

• Journal of Sensor Science and Technology
• /
• v.3 no.3
• /
• pp.16-21
• /
• 1994

A 3-terminal pin-type photosensor with gate contrail is fabricated using standard silicon CMOS IC process. The photosensor of a $100{\mu}m{\times}120{\mu}m$ size has dark current less than 1nA and its breakdown voltage is -14V with a depletion capacitance 0.75 pF at -5V reverse bias. Responsivity at 0V gate voltage is 0.25A/W at $0.633{\mu}m$ wavelength, 0.19A/W at $0.805{\mu}m$. Responsivity increases with increasing gate voltage. The integrated circuit of photosensor and CMOS inverter shows $22K{\Omega}$ transimpedance and photocurrent of $90{\mu}A$ switchs the output state of digital inverter without additional amplifier.

• Progress in Superconductivity
• /
• v.8 no.2
• /
• pp.181-185
• /
• 2007

For more than two decades Nb trilayer ($Nb/Al_2O_3/Nb$) process has been serving as the most stable fabrication process of the Josephson junction integrated circuits. Fast development of semiconductor fabrication technology has been possible with the recent advancement of the fabrication equipments. In this work, we took an advantage of advanced fabrication equipments in developing a superconducting Arithmetic Logic Unit (ALU) by using Nb trilayers. The ALU is a core element of a computer processor that performs arithmetic and logic operations on the operands in computer instruction words. We used DC magnetron sputtering technique for metal depositions and RF sputtering technique for $SiO_2$ depositions. Various dry etching techniques were used to define the Josephson junction areas and film pattering processes. Our Nb films were stress free and showed the $T{_c}'s$ of about 9 K. To enhance the step coverage of Nb films we used reverse bias powered DC magnetron sputtering technique. The fabricated 1-bit, 2-bit, and 4-bit ALU circuits were tested at a few kilo-hertz clock frequency as well as a few tens giga-hertz clock frequency, respectively. Our 1-bit ALU operated correctly at up to 40 GHz clock frequency, and the 4-bit ALU operated at up to 5 GHz clock frequency.

• Journal of Sensor Science and Technology
• /
• v.4 no.1
• /
• pp.3-8
• /
• 1995

n-ITO/p-PSL heterojunction photodetector have been fabricated on the Si wafer by using ITO(indium tin oxide) and PSL(porous silicon layer). They were anodized selectively by using silicon nitride and Ni-Cr/Au and were passivated by using ITO as well as being isolated by using mesa structure. With white light from 0 to 3000 Lux, the photocurrent varied linearly with incident light intensity. The reverse characteristics of fabricated devices were very stable up to a bias voltage of -40V and dark current density was about $40nA/mm^{2}$. When the device was exposed by Xe lamp whose wavelength range from 400nm to 1100nm, the maximum photo responsivity was about 0.6A/W between 600 and 700nm. Variation of the characteristics of fabricated devices after 5 weeks was negligible.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.6 no.1_2
• /
• pp.49-57
• /
• 1973

Based on the fork length data of 1960 and on the fishery statistical data of 1968, 1970 and 1971, a research was made on the migration of the Pacific saury in the waters off the eastern coast of Korea. The population is divided into four groups in terms of size as shown in Fig. 5. The four groups demonstrate more or less different pattern of migration, both temporally and spatially. Northward migration is brought out in order of size, i. e., the smaller move northward earlier than the larger do, and the order is reverse in the case of southward migration. The migration routes of each size group are presented in Fig. 8. Whether the fish takes its course to the north or the south, its distribution centroid within the fishing grounds is traced in general following the line between $130^{\circ}$ and $130^{\circ}$130^{\circ$x. long., although longitudinally a pronounced annual bias is found in its month position. The moving pattern of the distribution centroid is assumed to be related with the abundance of each group to a considerable extent.

• Korean Management Science Review
• /
• v.31 no.1
• /
• pp.1-15
• /
• 2014

As the scarcity of natural resources has become apparent, the recycling industry has emerged as a promising one for its growth potential. Yet, the recycling industry still remains undeveloped and inefficient for various reasons. In this study, we focus on firms' recycling processes to understand the current status of recycling firms' value creation activities. With respect to the adopted recycling processes, we empirically investigate the differences in firm characteristics and firm performance. We use the data from Keco (Korea Environment Cooperation) which annually conducts a survey of recycling firms in Korea. We exclusively consider the whole group of plastic recycling industry in order to control for a possible bias in firm performance, stemming from the heterogeneity in processing and recycling of materials other than plastics. We review the descriptive statistics from the sample firms and conduct a series of hierarchical regression analyses. The results show that most of the firms in this industry adopt physical transformation processes with a low-level technology. These firms with physical transformation processes are smaller in size and produce entry level items which do not secure higher margins. The results indicate that the recycling industry largely comprises low value added firms which lack economies of scale and resources for R&D. For the stable growth of the industry, recycling firms must create sustainable values through implementation of technology-driven processes and improvement in product quality. In addition, the government should help build a reliable reverse logistic network, lower the entry barriers, and provide necessary funding for the SMEs in the recycling industry.

• Environmental and Resource Economics Review
• /
• v.26 no.4
• /
• pp.473-498
• /
• 2017

This study examines the effect of environmental regulation considering the endogeneity on the productivity of Korean manufacturing industry based on the Porter hypothesis using data from the Mining and Manufacturing Survey, Survey of Research and Development in Korea, and Environmental Statistics Portal from 2003 to 2013 with fixed effect model. In order to eliminate the bias of the missing variables that may occur in the existing studies, we analyze factors affecting productivity such as market competition, R&D investment as explanatory variables. And, in order to eliminate measurement error and inverse causality, we use instrumental variable approach. The main results are as follows. First, our findings that the environmental regulation improve the productivity of Korean manufacturing in the long-run support the Porter hypothesis. Second, our findings suggest that measurement error and reverse causality are main sources of the endogeneity, while omitted variable is not. Finally, environmental technology R&D has reduced productivity in the short-run.