• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.937-950
• /
• 2004

With growing population of internet and web applications, distributed environment is considered to be the standard architecture of application. A network management systems(NMS) is necessary to control and monitor the complex network resources for providing and sharing the heft quality service. We recognize the NMS as a standard infrastructure for supporting efficient networking and a separate commercial applications. We believe every resource including software, hardware and environment for the network management should be separated from special protocols, vendors and applications. Therefore, We need a standard network management system that is efficient and consistent because of the heterogeous network features. In regards to software development, software reuse through assembling and extending the reusable elements such as patterns and components assures to realize the best productivity and quality The component based development(CBD) methodology that can assemble black box though well defined interfaces makes it possible to develop easer and quicker applications and is proved as the best software development solution involved in construction, selection and assembly of components. In this thesis, we describe the architecture for the network management and identify, define and design the components through analysis and design in the network management domain and Identified components mapped to the component architecture. We also specify the component development and design and implement the component for developing the network management. Implemented components apply to the component repository system that register, retrieve and understand the components. We analyze, design and implement the entire network management system based on configuration, connection, performance and fault management through the pre-developed components.

• Journal of Broadcast Engineering
• /
• v.15 no.3
• /
• pp.407-413
• /
• 2010

In DCA (Dynamic Channel Allocation) scheme of uplink cellular system appling a frequency reuse factor of one, when a new call requests a channel, the new call will be blocked if its SINR (Carrier to Noise and Interference Ratio) is less than the required SINR or there is no available channel. The additional channel allocation for the blocked new call can be performed with channel borrowing in the adjacent cells. The channel borrowing causes the CCI (Co-Channel Interference), thus the SINR of the existing calls is deteriorated and the channel reallocation for the existing calls is required. As a result, the channel borrowing leads to a complex calculation so that it is a NP-hard problem. Therefore, to overcome the problem, we propose a novel Group Search-based DCA scheme which decreases the number of the blocked new calls and then reduces the number of the channel reallocation by the channel borrowing for the blocked new calls. The proposed scheme searches the all channels in a group of the adjacent cells and home cell at the same time in order to minimizes the number of the blocked new calls. The simulation results show that proposed Group Search-based DCA scheme provides better new call blocking probability and system throughput than the existing Single Search-based DCA scheme which searches only the channels in home cell.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1055-1062
• /
• 2002

Recently, the lesson plan document that is imported in the educational area is not provided to the educational information systematically, and the teachers are not easy to compose the lessen plan documentation. So, it needs additional time and effort to develope the lesson plan documents. Because of increasing the distributing network. web-based lesson plan system is required to all of the education area. Therefore, we need to compose the lesson plan that is possible to obtain the various teacher's requirement by providing creation, retrival, and reusability of document using the standard XML on web. In this paper, we developed the system for creating the common DTD (Document Type Definition), providing the standard XML document through the common DTD over the lesson plan analysis. In this system, it provides the editor to compose the lesson plan and supports the searching function to improvement of reusability on the existing lesson plan. We design the searching functions such as the structure base, facet and keyword. The composed lesson plans are interoperated with Database. Consequently, we can share the information on web by composing the lesson plan using the XML and save the time and cost by directly writing the lesson plan on web. We can also provide the improved learning environment.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.1
• /
• pp.39-46
• /
• 2010

Recently, the effective use of closed waste landfill nearby urban areas has been demanded, because of the lack of the usable land. However, the reuse of closed landfill is needed an adequate stabilization of liner system. But most of these places are consisted of steep slope and hence it is necessary to use the geosynthetics liners in there. Liner system of waste landfills is an important facility which prevents leachate outgoing from the landfills and also groundwater infiltrating from surroundings into the landfills. During the waste disposal stage, differential settlement and tensile stress of the geosynthetic materials could occur due to impact load of trucks and dozers, waste loads and weak foundation soils. In this study, the tensile strength and tracer test were performed to evaluate the stability of geomembrane liner systems. Based on the tensile strength test result of in-situ geomembrane sample, the yield tensile strength maintain the suitable strength by specification and current law. However, according to the tracer test, the damage of geomembrane liner was detected on sanitary landfill section.

• The KIPS Transactions:PartD
• /
• v.17D no.1
• /
• pp.25-40
• /
• 2010

Service-Oriented Architecture (SOA) is a development paradigm for reusing services as an independent reuse unit. A service delivers a cohesive functionality through its external interface. Since services have unique characteristics which are not typically presented in conventional development approaches, there is a demand for effective approaches to developing services. Most of the current SOA methodologies presenta process where services are designed and developed from the requirements rather than reusing existing assets, which demands high cost and effort. Hence, a desirable approach is to be able to develop services by migrating from their existing legacy systems such as object-oriented system. A difficulty in this migration is that objects in object-oriented systems reveal characteristics which differ considerably from those of services. That is, objects are designed without considering commonalities among several consumers. In this paper, we first define mapping relationships between key artifacts in object-oriented system and those in SOA services. By these relationships and considering commonalities among several applications in a domain, we propose three systematic methods to migrate from object-oriented system to SOA services. Each method consists of a list of input and output artifacts and detailed guidelines which are performed in order. Through these methods, service developers can easily develop services with less effort.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.169-179
• /
• 2011

Korea owns vast amount of apartment houses no less than those of world prominent countries, but did not pay enough efforts to maintain existing apartment houses and develop policies to reuse them due to growth driven policy of housing supply like construction of new houses. Korea constructed tremendous amount of houses in short period through government led forced house supplying policy, and resulted in excess houses such that present house supply rate happened to be reaching 110%. However, recently there are growing demand of change in housing policy due to social environmental changes like low birth rate and aging of society etc and nationals' demand for improvement of residential quality. When such social changes are demanded and 80% of apartment houses in Korea are less than 20 years old, renovations and remodeling of apartment houses are anticipated to emerge as important matter. In particular, the apartment houses in Seoul and the 1st generation new cities like Bundang and Ilsan etc have passed considerable period of time after construction and require safety measure, it is quite impending to raise engineers for the maintenance of existing apartment houses. Therefore, in this paper, direction for the raising of maintenance engineers in Korea was proposed through analysis of relevant qualification system for the apartment houses maintenance engineers in the U.S.

• The Korean Journal of Archival Studies
• /
• no.17
• /
• pp.115-156
• /
• 2008

Archival objects produced in relation to the activities of public institutions hold the inexpressible symbolism, historical value, and esthetical value as well in that the values of display and reuse of archives materials in the future are high as figures. The revised law of Archives Act in 2007 has provided a foundation for managing the archival objects in every public organization, by also including archival objects into the category of archives produced and registered in relation to their works. Although it could be seen as a reforming will to aim at the differential approach from the past to recognize the archival objects as records and make the managing will documented, it is still in an unprepared state to define the concepts on archival objects and to have methods to systematically manage and preserve them. Thus this paper has researched on the type classification of archival objects and their evaluation, as way of developing the methods for the management system for archival objects. On the premise that it should be preceded by clear definitions of concepts and distinctive understanding of their types first in order to build up the management system for archival objects, definition and type classification of the archival object have been attempted, based on the actual research materials and the current relevant laws. In addition, this study has analyzed the characteristics of selecting archival objects in order to search for which one they should obtain and manage among archival objects produced and reused in relation to the works of public institutions. On the basis of this, the plans for the national selection system and provision of selecting criteria for the subjects of permanent preservation have been suggested in this study.

• Clean Technology
• /
• v.9 no.2
• /
• pp.87-100
• /
• 2003

The aim of study was to suggest a methodology for applying cleaner production technology in dyeing & finishing process of textile materials. To accomplish cleaner production, we performed consulting activity in dyeing factory, which composed of following different procedures. First, we organized consulting team with specialists for dyeing, energy and chemicals, and visited dyeing companies for the purpose of doing basic investigation such as analysis of process, chemicals & effluents, condition of equipment and process flow of products. Environmental aspect of raw materials (dyestuff, chemicals) was assessed by TOC, COD, BOD, and effluent of that was assessed by TOC, COD, BOD, TDS and pH. Second, We find out the problems in dyeing&finishing process from the view point of dyeing process, energy, raw materials and process management by utilizing MB (material balance), LCA(Life Cycle Assessment), EB(Energy Balance). Third, we generated the solutions to achieve optimal process condition by brain storming method, and then implemented the solutions to each process. Finally, we determined their effectiveness after considering the results of repeating trials for the solutions. Cleaner production could be achieved by keeping optimal process conditions, equipment modification, improved production management, and on-site reuse or recycling.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.71-80
• /
• 2012

LBS (Location Based Service) services are very useful to our daily life and it should be available inside a building: a huge building, a shopping mall, a large scale underground shopping center, and so on where GPS (Global Positioning System) signal is not available. An LBS which is provided inside a building is called an ILBS (Indoor Location Based Service). One of the most important techniques for ILBS development is indoor positioning. Among the indoor positioning techniques, APs (access points) of WLAN based ones are most economical because WLAN is available almost everywhere. Meanwhile, the web service has been proved to be an excellent practice of software reuse. Therefore, if indoor positioning is provided in the form of web service to programmers then development of ILBS would be greatly accelerated. This paper introduces the AP based trilateration and K-NN indoor positioning and RFID based indoor positioning web services we have developed.

• Journal of The Korean Association of Information Education
• /
• v.6 no.2
• /
• pp.234-245
• /
• 2002

A new era has come where high quality educational materials can be acquired easily through the World Wide Web. These materials, however, need to be refined and streamlined to maximize their effect on education. In order to provide such a streamlined flow, we need to be able to re-organize documents, which exist independent of each other on the Web, in a way that maintains their appropriate order in the right context to satisfy educational purposes. In addition, we should be able to provide supplementary explanations or missing information to the organized materials for smooth connections among them. In order to meet the requirements, we employed the virtual document concept that allows us to reuse existing documents for educational purposes. By providing a retrieval engine for virtual documents, we attempt to induce self-directed learning based on document retrieval, suitable for the level and purpose of students.