• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.3
• /
• pp.1-4
• /
• 1982

By high performance liquid chromatography, separation and quantification of glucoalkaloids $({\alpha}-chaconine$and${\alpha}-solanine)$ from potato (Solanum tuberosum, var. May Queen) was established using periderm and cortex. $Nucleosil-NH_2\;(10{\mu}m)$ was packed in two stainless steel columns ($4.0\;ID{\times}15\;cm$ and $4.0\;ID{\times}25\;cm$) which were connected in sequence and eluted with the mixture of tetrahydrofuran, phosphoric acid buffer and acetonitrile (50 : 25 : 25, v/v/v) at the flow rate of 1ml/min. and the absorbance were read at 208 nm. Retention time was 6.92 min. for ${\alpha}-chaconine$ and 10.96 min. for ${\alpha}-solanine$ with complete separation. This method took 12 min. per sample and seemed best. ${\alpha}-Chaconine$ and ${\alpha}-solanine$ were found much in periderm than in cortex.

• Korean Journal of Veterinary Service
• /
• v.20 no.1
• /
• pp.79-93
• /
• 1997

The sulfonamide is one of potentiative antimicrobial agents which is being used widely in veterinary medicine for control of several animal diseases such as mastitis as well as for promotion of growth. However, the misusages of sulfonamides in food producing animals, especially cattle produce several considerable problems in human health caused from residues of this antibiotic in milk product. To determine the most effective analytical methods for residual sulfonamides in raw milk, this study was performed comparatively using by some applicable screening detecting method such as TTC, Charm II test (sulfonamides), and Lactek tests (sulfamethazine kit). The positive result from screening tests was confirmed by HPLC method. Milk samples (540 raw milks) were collected from dairy farms. Results of this study are summariezed as follorrs ; 1. All samples (540 raw milks) showed negative response from TTC test, however, 18 raw milks of those samples responded positively to Charm II test. 2. By Lactek test, residual sulfamethazine was detected from 4 raw milks. Fifteen raw milks of 18 samples which were classified as positive one by Charm II test, showed positive response 3. Retention time of sulfonamides added at the level of 100ppb into sklm milk was ranged from 1.55 minute to 23.3 minute. Recovery rates of sulfonamides were variable from 6.7% upto 94.2% depended on the types of sulfonamlde. 4. Single type of sulfonamides was detected from 10 raw milk samples, 2 types of sulfonamides from 3 samples and 3 types from 2 raw milks by HPLC. 5. Sulfonamides was detected in this study were 5 types : 11 samples for sulfisomidine, 5 samples for sulfamethazine, 3 samples for sulfadlmethoxine, 2 samples for sulfathiazole and 1 sample for sulfadiazine. 6. The highest levels of residual sulfonamides was 210.3 ppb of sulfamethazine but the lowest concentration of residue was 2.2 ppb of sulfamethazine and sulfisomidine, respectively. Number of samples detected positively in this experiment were belows : above 100 ppb for 1 sample (4.5%) (sulfamethazine), 50~100 ppb for 4 samples (18.1%) (each 2 samples for sulfamethazine and sulfisomidine, respectively), 25~50 ppb for 6 samples (27.1%) (2 sulfisomidine, each 1 sample for sulfadiazine, sulfadimethoxine, sulfamethazine and sulfathiazole, respectively), 10~25ppb for 3 samples (13.7%) (3 sulfisomidine), and below 10ppb for 8 samples (36.4%) (4 sulfisomidine, 2 sulfadimethoxine and each 1 for sulfamethazine and sulfathiazole).

• Journal of the Korea Concrete Institute
• /
• v.26 no.2
• /
• pp.219-227
• /
• 2014

The purpose of this study is to investigate water purification properties of porous concrete by using effective microorganisms through the long-term continuous flow test. To solve the problems such as desorption of conventional microorganisms, in this study, tertiary treatment of the effective microorganisms identified by 16S rDNA sequence analysis was adopted per each step in the manufacturing process of porous concrete. And concentration for optimum continuous flow test and operation conditions through basic experiments according to retention time were investigated. Based on the experimental results, the porous concrete applying effective microorganisms showed no toxicity on the biological water quality and exhibited excellent removal efficiency than normal porous concrete. Therefore, contaminated water quality would be improved by treatment performance investigation of contaminants through long-term continuous flow test. If problems are complemented during the experiment process, it is expected to be able to reduce the non-point pollution sources flowing into river.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.6
• /
• pp.21-28
• /
• 2007

The objective of this study was to investigate the effect of hydraulic retention time (HRT) on removal efficiencies of organic matter, nitrogen and phosphorus in MBR-RO process for treating synthetic sewage. In MBR process, turbidity was less than average 2 NTU and average removal efficiency showed more than 99% during the operation period(MBR 105 day). As a result of HRT variation, average removal efficiencies of $COD_{Cr}$ on HRT 6, 12, 18 and 24hour were about 72.4, 84, 88.6 and 92.5%, respectively. The $NH_4{^+}-N$ removal efficiency was about 60.2 85.5, 91.3 and 92.2%, respectively. T-N and T-P removal efficiencies increased from 53.7 and 56.8 to 82.5 and 86.4%, respectively as the HRT increased from 6 hour to 24 hour. In RO process, average removal efficiencies of color and $COD_{Cr}$ in RO permeate were about 99.9% and 96.8%, respectively. Also, removal efficiencies of T-N, $NH_4{^+}-N$, $NO_3{^-}-N$ and T-P were all above average 90%.

• Journal of Environmental Science International
• /
• v.12 no.12
• /
• pp.1315-1320
• /
• 2003

To obtain the residual organochlorine pesticides in the coastal environment, the methods of analysis for BHC's isomer, Kelthane, Orthocide and Endrin by GC-ECD are surveyed. The relative retention time for ${\alpha}$-BHC, ${\beta}$-BHC, (equation omitted)-BHC and $\delta$-BHC is 1.00, 1.18, 1.24, 1.31 and it's of Kelthane, Orthocide, Endrin is 1.56, 1.70, and 2.02, respectively. The BHC isomers Kelthane, Orthocide and Endrin are separated on the base line. The plate height(H) for ${\alpha}$-BHC, ${\beta}$-BHC, (equction omitted)-BHC and $\delta$-BHC is 50mm, 35mm, 32mm and 29mm, and it's of Kelthane, Orthocide, Endrin is 81mm, 68mm and 48mm, respectively. The qualified defection concentration for ${\alpha}$-BHC, ${\beta}$-BHC, (equation omitted)-BHC and $\delta$-BHC is 0.26, 0.36, 0.37 and 0.39ng/g and it's of Kelthane, Orthocide, Endrin is 0.55, 1.39 and 0.56ng/g, respectively, BHC's isomer, Kelthane, Orthocide and Endrin are not detected in soil environment on South Cheju Island. Also residual organochlorine pesticides are not detected in the sea water and sediment in the ocean environment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.121-134
• /
• 2004

This article describes a clinical protocol for the conventional rehabilitation of patient diagnosed with partial anodontia. A combined dental therapy approach was used and included endodontic therapy and root capping on the maxillary central incisors, fabrication of a maxillary overdenture, and fabrication of mandibular konus overdenture supported by 3 konus abutments. Within this protocol, tooth-supported overdenture prostheses are used for 2 purposes: first, to obtain the most rigid retention and function at an established maxillary-mandibular relationship; and second, to continuously maintain function and esthetic appearance applying immediate dentures after teeth extraction. The idea behind this protocol and its associated clinical procedures is presented along with a discussion compared with implant therapy. In the case introduced, and after 7 years of observation, the therapy can be seen as a success. We increased the occlusal vertical height in this case, but it would be more appropriate to see this as recovering the occlusal vertical height that was lost. The process of increasing the occlusal vertical height, that is restoration of the face, modification of the extrinsic occlusion of the incisors, and retraction of the mandible is very difficult and important. Ultimately, class III malocclusion is fixed, adequate occlusal vertical height is gained, and the retracted posterior anodontial portion is restored by prosthodontic dentures based on the rigid support theory. The result of the therapy done on the later-achieved malocclusion with partial anodontia on the posterior portion must consider the following in order to maintain the safety of the esthetics of the tooth and face for a period of time: 1) occlusal restoration with an ideal occlusal vertical height, 2) allowance of the final occlusion induced by the functional relationship of the upper and lower jaw, 3)final occlusion functionally induced by the lip competence limit.

• Journal of the Korean Electrochemical Society
• /
• v.20 no.2
• /
• pp.34-40
• /
• 2017

Electric double layer capacitors (EDLC: electric double layer capacitors) have drew attention as an energy storage device for the next generation because of their outstanding power capability and durability. But their usage is somewhat limited due to low energy density over secondary batteries. One of methods to improve the energy of EDLC is expanding the voltage window of cell operation by increasing the charge cut-off voltage. In this study, $SBP-BF_4$ (spirobipyrrolidinium tetrafluoroborate), $TEA-BF_4$ (tetraethylammonium tetraflouroborate) and $EMI-BF_4$ (1-ethyl-3-methylimidazolium tetrafluoroborate) in AN (acetonitrile) were selected to evaluate the possibility of application at high voltage environment. The LSV (linear sweep voltammetry) measurements showed that the 1.5M SBP-BF4/AN electrolyte was stable over a wide potential window and showed the best electrochemical performance compared to other combinations of electrolytes at high voltage environments (over 3.0 V). Furthermore, TMSP (tris(trimethylsilyl) phosphite) was applied to 1.5M SBP-BF4/AN in order to maintain stable performance at high voltage for the long period of time. The electrolyte with TMSP additive showed the capacity retention of 93% after 10,000 cycles at 3.3 V.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.3
• /
• pp.386-395
• /
• 1994

As a basic research on applying the microbial strains which had been isolated and proved to remove heavy metals, such as Pb, Cd, Zn, and Cu in This laboratory to actual wastewater treatment, optimum condition of the treatment system with addition of single or multiple species of pollutants and microorganisms were investigated at small scale. Concentration of the bacterial inoculum was 3000mg/L and 1500mg/L of MLSS for treatment with single and multiple species, respectively. Removal rates of heavy metals were expressed at HRT’s (Hydraulic Retention Time) of 12, 24, and 48 hr. Removal rates of Pb, Cd, Zn, and Cu after 12 days at HRT of 24hr with addition of single and multiple species were 93%, 90%, 80%, and 39%, and 75%, 90%, 74%, and 48%, respectively. Judging from these results, treatment capability of the isolated strains is excellent. Hence, the microorganisms are expected to be applicable to actual wastewater treatment.

• Analytical Science and Technology
• /
• v.10 no.2
• /
• pp.91-104
• /
• 1997

Scutellariae radix has been used on the control of body fever as oriental medicine for thousand years. Analytical aspect for the main components of Scutellariae radix was set up improving sensitivity and resolution. The analysis of 3 different flavonoids present in Scutellariae radix-baicalin, baicalein, wogonin-was conducted by means of high performance liquid chromatography with ODS reverse phase column in conjunction with a Photo Diode Array UV detector(280nm) at $40^{\circ}C$. Mobile phase was carried out at 1mL/min, composed of acetonitrile and 0.1M phosphoric acid in the form of a gradient method. Under these circumstances the retention time for baicalin, baicalein, wogonin was 7.65, 11.65 and 14.12 minutes respectively. As a result for the efficiency on extraction of active ingredients with proposed analytical process according to it's growing districts, Sunchang in Junbuk for baicalin and Bulkyo in, Junnam for bicalein and wogonin have shown the best results. Even the extraction at room temperature was satisfactory. Among acids, 0.1M acetic acid revealed the best achievements. The mixture of acetonitrile and 0.2M phosphoric acid(75:25) has been shown the best efficiency as well as stability for the extraction of active ingredients.

• Korean Journal of Food Science and Technology
• /
• v.9 no.2
• /
• pp.116-122
• /
• 1977

The volatile flavor components of Kimchis were identified and the volatiles of fermented Kimchis (1.29% NaCl and 4.89 NaCl) were compared with those of raw Kimchi (1.29% NaCl). After the existence of carbonyls and sulfur compounds were confirmed by precipitation method, vacuum distillation was carried out to collect the volatiles of Kimchis in traps submerged in ice+salt, dryice-acetone and liquid N, respectively. The volatile flavor components were identified by GLC. The results were; 1. 17 volatile flavor components of Kimchis were identified by comparison of retention time with those of known compounds and acetaldehyde, acetone, ethanol, ethyl sulfide were positively identified by m.p., IR, UV, TLC. etc. 2. Ethanol was the most abundant volatiles of Kimchis and the content was much higher in fermented low salt Kimchi than in unfermented low salt Kimchi. 3. On the contrary, acetaldehyde and volatile sulfur compounds were reduced in fermented Kimchis, especially in fermented low salt Kimchi.